User manual

Views:
 
Category: Education
     
 

Presentation Description

Canon

Comments

Presentation Transcript

slide 1:

Camera User Guide DIGITAL CAMERA Camera User Guide ENGLISH CDI-E410-030 XXXXXXX © CANON INC. 2009 PRINTED IN JAPAN Trademark Acknowledgments • The SDHC logo is a trademark. • HDMI the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Disclaimer • Reprinting transmitting or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • Every effort has been made to ensure that the information contained in this guide is accurate and complete. However if you notice any errors or omissions please contact the Canon customer service center indicated on the customer support list included with the product. • The above items notwithstanding Canon accepts no liability for damages due to mistaken operation of the products. Battery Charger CB-2LZ This product is not intended to be serviced. Should the product cease to function in its intended manner it should be returned to the manufacturer or be discarded. This power unit is intended to be correctly orientated in a vertical or floor mount position. IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A. use an attachment plug adapter of the proper configuration for the power outlet. This battery charger is for exclusive use with Battery Pack NB-7L 1.05 Ah. There is a danger of explosion if other battery packs are used. • Make sure you read this guide before using the camera. • Store this guide safely so that you can use it in the future. • Please use this manual along with the PDF manuals included on the CD-ROM p. 2. C O P Y

slide 2:

2 Check if the following items are included in your camera package. If anything is missing contact the retailer from which you purchased the camera. Using the PDF Manuals Also refer to the PDF manuals on the CD-ROM. After installation shortcut icons appear on the desktop. If the software installation fails you can find the manuals in the Readme folder on the CD-ROM. • Personal Printing Guide Read when you want to connect the camera to a printer sold separately and print. • Software Guide Read when you want to use the included software. • A memory card is not included. • Adobe Reader is required to view the PDF manuals. Checking the Package Contents Camera Battery Pack NB-7L with Terminal Cover Battery Charger CB-2LZ/CB-2LZE AV Cable AVC-DC400 Neck Strap NS-DC9 Camera User Guide This Guide Warranty Card DIGITAL CAMERA Solution Disk “Canon Customer Support” Leaflet Interface Cable IFC-400PCU C O P Y

slide 3:

3 Test Shots Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc. its subsidiaries and affiliates and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory including memory cards that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. Warning Against Copyright Infringement The images recorded with this camera are intended for personal use. Do not record images that infringe upon copyright laws without the prior permission of the copyright holder. Please be advised that in certain cases the copying of images from performances exhibitions or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use. Warranty Limitations This camera’s warranty is only effective in the country of sale. If there is a problem with the camera while abroad please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts please see the customer support list supplied with your camera. LCD Monitor • The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99 of the pixels operate to specification but occasionally non-performing pixels may appear as bright or dark dots. This is not a malfunction and has no effect on the recorded image. • The LCD monitor may be covered with a thin plastic film for protection against scratches during shipment. If so remove the film before using the camera. Camera Body Temperature Please take care when operating the camera for an extended period as the camera body may become warm. This is not a malfunction. Memory Cards The various types of memory cards that can be used in this camera are collectively referred to as memory cards in this guide. Read This First C O P Y

slide 4:

4 What Do You Want to Do 4 ● Shoot leaving it to the camera to make settings . . . . . . . . . . . . 25 ● Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 56 – 59 ● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 68 88 92 ● Shoot in places where I cannot use the flash turn off the flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 ● Take pictures with me in them too self-timer . . . . . . . . . . . 67 68 ● Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 66 ● Take close-up pictures of subjects macro shooting . . . . . . . . . 77 ● Take sepia toned or black and white pictures. . . . . . . . . . . . . . . 82 ● Change the size of picture I want to take recording pixels . . . . 74 ● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 ● Shoot without the effects of camera shake image stabilization . . 155 ● Change the ISO speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 ● Shoot without the effects of camera shake even in low light conditions Low Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 IF wP At night p. 56 At the beach p. 58 Against snow p. 59 ’ Portraits p. 56 Take good people shots Take good landscapes O U Foliage p. 59 Sunsets p. 57 J Landscape p. 56 Night Scene p. 58 t Fireworks p. 58 S Sports p. 57 Shoot various other scenes V Kids and pets p. 57 y Aquarium p. 58 Indoors p. 57 Underwater p. 58 Shoot C O P Y

slide 5:

What Do You Want to Do 5 ● Maintain the focus on moving subjects Servo AF. . . . . . . . . . . 91 ● Make dark subjects appear brighter i-Contrast. . . . . . . . . . . . 103 1 ● Look at my pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 ● Automatically play back pictures slideshow . . . . . . . . . . . . . . 125 ● Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 ● Quickly search pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . 122 123 ● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 133 ● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . 130 View E ● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 ● View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Shoot/View Movies Print 2 ● Easily print pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ● Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Save 3 ● Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ● Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 150 Other C O P Y

slide 6:

6 Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions letting you learn more as you read each chapter. Checking the Package Contents .......2 Read This First ..................................3 What Do You Want to Do ................4 Conventions Used in this Guide ........9 Safety Precautions...........................10 Charging the Battery........................14 Inserting the Battery and Memory Card...................................16 Using the LCD Monitor ....................19 Setting the Date and Time...............20 Setting the Display Language..........22 Formatting Memory Cards...............23 Pressing the Shutter Button.............24 Taking Pictures................................25 Viewing Images ...............................28 Erasing Images................................29 Printing Images................................30 Shooting Movies ..............................31 Viewing Movies................................33 Transferring Images to a Computer..................................34 Accessories .....................................38 Separately Sold Accessories...........40 Components Guide..........................42 Information Displayed on the Screen ..................................44 Indicators .........................................47 FUNC. Menu – Basic Operations ....48 Menu – Basic Operations ................49 Changing the Sound Settings ......... 50 Changing the Screen Brightness .... 51 Returning the Camera to Default Settings ........................................... 52 Low Level Memory Card Formatting....................................... 53 Power Saving Function Auto Power Down......................... 54 Clock Functions............................... 54 Shooting in Various Conditions....... 56 Shooting in Mode Low Light Mode ............................ 60 Shooting in 8 Quick Shot Mode .......................... 61 Turning the Flash Off ...................... 63 Zooming in More Closely on Subjects Digital Zoom................... 64 Inserting the Date and Time............ 66 Using the Self-Timer ....................... 67 Using the Face Self-Timer .............. 68 Shooting in Program AE.................. 72 Adjusting the Brightness Exposure Compensation .............. 73 Turning the Flash On ...................... 73 Changing the Recording Pixels Image Size.................................... 74 Table of Contents 1 Getting Started ....................13 2 Learning More......................41 3 Shooting in Special Conditions and Commonly Used Functions................... 55 4 Choosing Settings Yourself ............................... 71 C O P Y

slide 7:

Table of Contents 7 Changing the Compression Ratio Image Quality ............................... 74 Shooting in RAW............................. 76 Shooting Close-ups Macro............................................ 77 Changing the ISO Speed................ 78 Adjusting the White Balance........... 79 Continuous Shooting....................... 81 Changing the Tone of an Image My Colors ..................................... 82 Shooting Using the Two Second Self-Timer ....................................... 83 Customizing the Self-Timer............. 84 Shooting Using the Viewfinder........ 85 Shooting Using a TV Monitor.......... 86 Changing the Composition with the Focus Lock ........................ 86 Changing the AF Frame Mode........ 88 Changing the AF Frame Position and Size ............................ 89 Magnifying the Focal Point.............. 90 Shooting with the AF Lock .............. 91 Shooting with Servo AF .................. 91 Choosing the Person to Focus On Face Select.................. 92 Changing the Metering Mode.......... 93 Shooting in Manual Focus Mode .... 94 Focus Bracketing Focus-BKT Mode.......................... 95 Shooting with the AE Lock.............. 96 Shooting with the FE Lock .............. 97 Auto Exposure Bracketing AEB Mode .................................... 98 Using the ND Filter.......................... 99 Shooting with Slow Synchro ........... 99 Setting the Shutter Speed .............100 Setting the Aperture Value ............101 Setting the Shutter Speed and Aperture Value ..............................102 Correcting the Brightness and Shooting i-Contrast .....................103 Red-Eye Correction.......................104 Adjusting the Flash Exposure Compensation ...............................105 Adjusting the Flash Output............106 Checking for Shut Eyes.................107 Registering Shooting Settings.......108 Changing the Color and Shooting ........................................109 Shooting Stitch Assist Images.......112 Changing the Movie Mode ............114 Changing the Image Quality..........115 Using the Wind Filter.....................116 AE Lock/Exposure Shift.................116 Other Shooting Functions..............117 Playback Functions .......................118 Editing ...........................................119 Quickly Searching Images.............122 Viewing Images in Filtered Playback........................................123 Viewing Slideshows.......................125 Checking the Focus.......................126 Magnifying Images ........................127 Changing Image Transitions .........127 Viewing Images on a TV ...............128 5 Getting More Out of Your Camera ................................ 87 6 Using Various Functions for Shooting Movies ......... 113 7 Using Playback and Other Functions........................... 121 C O P Y

slide 8:

Table of Contents 8 Viewing Images on a High-Definition TV.......................129 Protecting Images..........................130 Erasing All Images.........................133 Organizing Images by Category My Category................................135 Rotating Images.............................137 Resizing Images ............................138 Trimming........................................139 Adding Effects with the My Colors Function........................140 Correcting the Contrast i-Contrast.....................................141 Correcting the Red-Eye Effect.......142 Printing from the Print List DPOF ..........................................143 Choosing Images for Printing DPOF ..........................................144 Changing Functions.......................148 Changing Shooting Functions........152 Registering Commonly Used Shooting Menus.............................157 Changing Playback Functions .......158 Changing the Start-up Image or Sound ............................................159 Using Household Power................ 162 Using the Lenses Sold Separately .......................... 163 Changing the Ring Color Sold Separately .......................... 165 Using the Remote Switch Sold Separately .......................... 166 Using an Externally Mounted Flash Sold Separately .......................... 167 Troubleshooting ............................ 175 List of Messages that Appear on the Screen................................ 178 Functions Available in Each Shooting Mode.............................. 180 Menus ........................................... 182 Handling Precautions.................... 186 Specifications ................................ 187 Index ............................................. 191 8 Customizing the Camera.....147 9 Useful Information............ 161 C O P Y

slide 9:

9 • Icons are used in the text to represent the camera buttons and switches. • Language that displays on the screen appears inside square brackets. • The directional buttons control dial and FUNC./SET button are represented by the following icons. • : Troubleshooting tips. • : Hints for getting more out of your camera. • : Things you should be careful about. • : Supplemental information. • p. xx: Reference pages. “xx” stands for page number. • This guide assumes all functions are at their default settings. Conventions Used in this Guide Up button FUNC./SET button Right button Left button Down button Control dial C O P Y

slide 10:

10 • Before using the camera please ensure that you read the safety precautions described below. Always ensure that the camera is operated correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Camera Warning Denotes the possibility of serious injury or death. Caution Denotes the possibility of injury. Caution Denotes the possibility of damage to the equipment. Warning • Do not use the camera’s viewfinder in the presence of strong light sources such as the sun on a clear day. This could damage your eyesight. • Do not trigger the flash in close proximity to human eyes. Exposure to the intense light produced by the flash could damage eyesight. In particular remain at least one meter 39 inches away from infants when using the flash. • Store this equipment out of the reach of children and infants. Strap: Putting the strap around a child’s neck could result in asphyxiation. Memory card: Dangerous if accidentally swallowed. If this occurs contact a doctor immediately. • Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. • To avoid the risk of injury do not touch the interior of the camera if it has been dropped or otherwise damaged. • Stop operating the camera immediately if it emits smoke a strange smell or otherwise behaves abnormally. • Do not use organic solvents such as alcohol benzine or thinner to clean the equipment. • Do not allow liquids or foreign objects to enter the camera. This could result in fire or electrical shock. If liquid or foreign objects come into contact with the camera interior immediately turn the camera power off and remove the battery. • Use only recommended power sources. Using other power sources could result in fire or electrical shock. Safety Precautions C O P Y

slide 11:

Safety Precautions 11 Battery Battery Charger Other Warnings • Use only the recommended battery. • Do not place the battery near or in direct flame. • Do not let the battery come into contact with water e.g. sea water or other liquids. • Do not attempt to disassemble alter or apply heat to the battery. • Avoid dropping or subjecting the battery to severe impacts. This may cause explosions or leaks resulting in fire injury and damage to the surroundings. In the event that a battery leaks and the eyes mouth skin or clothing contacts these substances immediately flush with water and seek medical assistance. If the battery charger becomes wet unplug it from the outlet and consult your camera distributor or the closest Canon Customer Support Help Desk. • Use only the specified battery charger to charge the battery. • Do not cut damage alter or place heavy items on the power cord. • Unplug the power cord periodically and wipe away any dust and dirt that has collected on the plug the exterior of the power outlet and the surrounding area. • Do not handle the power cord with wet hands. This could result in fire or electrical shock. • Do not play the supplied CD-ROMs in any CD player that does not support data CD-ROMs. Playing the CD-ROMs in an audio CD player music player could damage the speakers. It is also possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player. Caution • Be careful not to bang the camera or subject it to strong impacts or shocks when hanging it by the strap. • Be careful not to bump or push strongly on the lens. This could damage the camera or lead to injury. • Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged or not fully plugged into the outlet. This could result in electrical shock or fire. • Avoid using placing or storing the camera in the following places. - Places subject to strong sunlight. - Places subject to temperatures above 40 °C 104 °F. - Humid or dusty areas. These could cause leakage overheating or an explosion of the battery resulting in electrical shock fire burns or other injuries. High temperatures may also cause deformation of the casing. C O P Y

slide 12:

Safety Precautions 12 • Do not allow dirt or metal objects such as pins or keys to contact the charger terminals or plug. This could result in fire electrical shock or other damage. • When using the separately sold optional lenses be sure to attach them firmly. If the lens becomes loose and falls off it may crack and the shards of glass may lead to cuts. • The slideshow transition effects may cause discomfort when viewed for prolonged periods. • When using the flash be careful not to cover it with your fingers or clothing. This could result in burns or damage to the flash. Caution • Do not aim the camera at bright light sources the sun etc.. Doing so may cause malfunctions or damage the image sensor. • When using the camera on a beach or at a windy location be careful not to allow dust or sand to enter the camera. This may cause the camera to malfunction. • In regular use small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt dust or other foreign matter from the flash to prevent heat build-up and damage to the unit. • Unplug the battery charger from the power outlet after recharging is complete or when you are not using it. • Do not place anything such as cloth on top of the battery charger while it is charging. Leaving the unit plugged in for a long period of time may cause it to overheat and distort resulting in fire. • Remove and store the battery when you are not using the camera. If the battery is left inside the camera damage caused by leakage may occur. • Before you discard the battery cover the terminals with tape or other insulators. Contacting other metal materials in waste containers may lead to fire or explosions. • Do not place the battery near pets. Pets biting the battery could cause leakage overheating or explosion resulting in fire or injuries. • When carrying the camera in a bag close the LCD monitor to face inward to ensure that hard objects to not come into contact with the screen. Failure to do so may cause malfunctions or damage the LCD monitor. C O P Y

slide 13:

13 Getting Started This chapter explains preparations before shooting how to shoot in A mode and then how to view erase and print the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer. Attaching the Strap/Holding the Camera • Attach the included strap and place it around your neck to avoid dropping the camera during use. • Keep your arms tight against your body while holding the camera firmly by the sides. Be sure that your fingers do not block the flash. 1 C O P Y

slide 14:

14 Use the included charger to charge the battery. The battery is not charged at time of purchase. Be sure to charge the battery before use. Remove the cover. Insert the battery. ● Align the marks on the battery and charger then insert the battery by sliding it in and down . Charge the battery. ● For CB-2LZ: Flip out the plug and plug the charger into a power outlet . ● For CB-2LZE: Plug the power cord into the charger then plug the other end into a power outlet. The charge lamp lights red and charging starts. ● The charge lamp will light green when charging has finished. Charging takes approx. 2 hours and 20 minutes. Remove the battery. ● Unplug the battery charger from the power outlet then remove the battery by sliding it in and up . Charging the Battery CB-2LZ CB-2LZE To protect the battery and prolong its life do not charge it for longer than 24 hours continuously. C O P Y

slide 15:

Charging the Battery 15 Approximate Number of Shots That Can Be Taken • The number of shots that can be taken is based on the Camera Imaging Products Association CIPA measurement standard. • Under some shooting conditions the number of shots that can be taken may be less than mentioned above. Battery Charge Indicator An icon or message will appear on the screen indicating the battery’s charge state. • Charge the battery on the day or the day before it will be used. Charged batteries continue to discharge naturally even if they are not used. • How to store the battery for long periods. Deplete and remove the battery from the camera. Attach the terminal cover and store the battery. Storing a battery for long periods of time about a year without depleting it may shorten its life span or affect its performance. • The battery charger can also be used when abroad. The charger can be used in regions that have 100 – 240 V 50/60 Hz AC power. If the plug does not fit the outlet use a commercially available plug adapter. Do not use electrical transformers for foreign travel as they will cause damage. • The battery may develop a bulge. This is a normal characteristic of the battery and does not indicate a problem. However if the battery bulges to the point where it will no longer fit into the camera please contact a Canon Customer Support Help Desk. • If the battery is quickly depleted even after charging it has reached the end of its life span. Purchase a new battery. Number of shots LCD Monitor On 390 LCD Monitor Off 1000 Playback Time Hours 7 Display Summary Good. Slightly depleted but sufficient. Blinking red Nearly depleted. “Change the battery pack.” Depleted. Recharge the battery. Using the battery and charger effectively Attach the cover to a charged battery so that the mark is visible. C O P Y

slide 16:

16 Insert the supplied battery and a commercially available memory card into the camera. Check the card’s write-protect tab. ● If the memory card has a write-protect tab you will not be able to record images if the tab is in the locked position. Slide the tab up until you hear a click. Open the cover. ● Slide the cover and open it . Insert the battery. ● Insert the battery as shown until it locks into place with a click. ● Be sure to insert the battery in the correct direction or it will not properly lock into place. Insert the memory card. ● Insert the memory card as shown until it locks into place with a click. ● Be sure the memory card is oriented correctly. Inserting the memory card in the wrong direction could damage the camera. Inserting the Battery and Memory Card Terminals C O P Y

slide 17:

Inserting the Battery and Memory Card 17 Close the cover. ● Close the cover and slide it until it locks into place with a click. Removing the Battery and Memory Card Remove the battery. ● Open the cover and press the battery lock in the direction of the arrow. The battery will pop up. Remove the memory card. ● Push the memory card in until you hear a click then slowly release it. The memory card will pop up. C O P Y

slide 18:

Inserting the Battery and Memory Card 18 Approximate Number of Shots per Memory Card • Values are based on the default settings. • The number of shots that can be taken will vary depending on camera settings the subject and the memory card used. You can check the number of shots that can be taken when the camera is in a Shooting mode p. 25. Compatible Memory Cards • SD memory cards • SDHC memory cards • MultiMediaCards • MMCplus memory cards • HC MMCplus memory cards SD and SDHC memory cards have a write-protect tab. If this tab is in the locked position Card locked will appear on the screen and you will not be able to take or erase images. Memory Card 2GB 8GB Number of shots 749 2994 Can you check the number of shots that can be taken What is the write-protect tab Number of shots that can be taken C O P Y

slide 19:

19 You can use the LCD monitor to compose pictures before shooting operate menus or play back images. You can freely adjust the angle and orientation of the LCD monitor to suit your shooting conditions. Open the LCD monitor. Rotate the LCD monitor. ● Rotate the LCD monitor 180° toward the lens turn the top edge of the LCD monitor away from you. Close the LCD monitor. ● Close the LCD monitor with the screen facing outwards. Using the LCD Monitor Approx. 90° Approx. 180° Approx. 170° Always keep the LCD monitor closed with the screen facing the camera body when the camera is not in use. In shooting mode if the screen is in the position in Step 2 the image will be flipped from left to right mirror image. To cancel the reverse display function press the n button choose Reverse Disp. from the 4 tab and press the qr buttons to choose Off. C O P Y

slide 20:

20 The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings be sure to set them. Turn on the camera. ● Press the power button. The Date/Time screen will appear. Set the date and time. ● Press the qr buttons to choose an option. ● Press the op buttons or turn the  dial to set a value. Make the setting. ● Press the m button. Once the date and time have been set the Date/Time screen will close. ● Pressing the power button will turn off the camera. Set the correct date and time. If you have not set the date and time the Date/ Time screen will appear each time you turn on the camera. If you choose in Step 2 and press the op buttons or turn the  dial and choose you will set the time to daylight saving 1 hour ahead. Setting the Date and Time Reappearing Date/Time screen Daylight saving time settings C O P Y

slide 21:

Setting the Date and Time 21 Changing the Date and Time You can change the current date and time settings. Display the menu. ● Press the n button. Choose Date/Time in the 3 tab. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose Date/Time then press the m button. Change the date and time. ● Follow Steps 2 and 3 on p. 20 to adjust the setting. ● To close the menu press the n button. • The camera has a built-in date/time battery backup battery that allows the date/time settings to be retained for about three weeks after the battery pack has been removed. • By inserting a charged battery or connecting an AC adapter kit sold separately p. 40 the date/time battery can be charged in about 4 hours even if the camera is not turned on. • If the date/time battery is depleted the Date/Time menu will appear when you turn the camera on. Follow the steps on p. 20 to set the date and time. Date/Time battery C O P Y

slide 22:

22 You can change the display language in the screen menus and messages. Enter Playback mode. ● Press the 1 button. Display the settings screen. ● Press and hold the m button then immediately press the n button . Set the display language. ● Press the opqr buttons or turn the  dial to choose a language then press the m button. Once the display language has been set the settings screen will close. The clock will appear if too much time passes between pressing the m button and the n button in Step 2. If the clock appears press the m button to remove the clock and repeat Step 2. Setting the Display Language What if the clock appears when the m button is pressed You can also change the display language by pressing the n button choosing the 3 tab and choosing the Language menu item. C O P Y

slide 23:

23 Before you use a new memory card or one that has been used in other devices you should format the card with this camera. Formatting initializing a memory card erases all data on the memory card. As you cannot retrieve the erased data exercise adequate caution before formatting the memory card. Display the menu. ● Press the n button. Choose Format. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose Format then press the m button. Format the memory card. ● Press the qr buttons or turn the  dial to choose OK then press the m button. The memory card will be formatted. When formatting has finished the menu screen will reappear. Formatting Memory Cards Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card take precautions such as physically destroying the card to prevent personal information leaks. The total capacity of the memory card displayed in the formatting screen may be less than indicated on the memory card. C O P Y

slide 24:

24 The shutter button has two stops. To take images that are in focus be sure to first press the shutter button lightly halfway to focus then take the shot. Press halfway lightly to the first stop. The camera automatically focuses and selects the necessary settings for shooting such as the brightness. When the camera focuses it will beep twice. Press fully to the second stop. The camera plays the shutter sound and takes the shot. ● Since the shot is being taken while the shutter sound plays be careful not to move the camera. • Since the time required to shoot differs according to the scene you want to take the length of the shutter sound may change. • If the camera or subject moves while the shutter sound is playing the recorded image may be blurry. Pressing the Shutter Button Does the length of the shutter sound change If you just press the shutter button fully without pausing halfway the image may not be in focus. C O P Y

slide 25:

25 Since the camera can determine the subject and shooting conditions you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces setting the color and brightness to optimal levels. Turn on the camera. ● Press the power button. The start-up sound will play and the start- up screen will appear. Choose A mode. ● Set the mode dial to A. ● When you point the camera toward the subject the camera will make a slight noise as it determines the scene. The camera focuses on the subject it judges to be the main subject and the icon for the determined scene appears in the upper right of the screen. When faces are detected a white frame appears on the face of the main subject while gray frames appear on other detected faces. A white frame will follow a detected face that is moving and the gray frames will disappear. Compose the shot. ● Moving the zoom lever toward i will zoom in on your subject making it appear larger. Moving the lever toward j will zoom out from your subject making it appear smaller. Taking Pictures Zoom bar Focus range approx. C O P Y

slide 26:

Taking Pictures 26 Focus. ● Press the shutter button halfway to focus. When the camera focuses it will beep twice. Green AF frames appear where the subject is in focus. Several AF frames will appear when the camera focuses on more than one point. When a moving face is detected and you keep the shutter button pressed halfway a blue AF frame appears and the focus and exposure are continuously adjusted Servo AF. Shoot. ● Press the shutter button fully. The camera will play the shutter sound and shoot. The indicator will blink green while the image is recorded to the memory card. The image will appear on the screen for about two seconds. ● You can take a second picture even while an image is displayed by pressing the shutter button again. • a flashing appears Attach the camera to a tripod so that the camera does not move and blur the image. • the camera does not play any sounds Pressing the n button while turning on the camera power will turn off all sounds except for warning sounds. To turn the sounds on press the n button choose the 3 tab and then choose Mute. Press the qr buttons to choose Off. • the image comes out dark even if the flash fired when shooting The subject is too far away for the flash to reach. Shoot within the effective flash range of approximately 50 cm – 7.0 m 1.6 – 23 ft. at maximum wide angle and approximately 50 cm – 4.0 m 1.6 – 13 ft. at maximum telephoto. AF Frames What if... C O P Y

slide 27:

Taking Pictures 27 • the screen does not turn on when you turn on the camera Press the l button to turn on the screen. • the camera beeps once when the shutter button is pressed halfway Your subject is too close. When the camera is at maximum wide angle move about 1 cm 0.4 in. or more away from your subject and shoot. Move about 30 cm 12.0 in. or more away when the camera is at maximum telephoto. • the lamp lights when the shutter button is pressed halfway To reduce red-eye and to assist in focusing the lamp may light when shooting in dark areas. • the h icon blinks when you try to shoot The flash is charging. You can shoot when recharging ends. Scene Icons The camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color. Appears when the camera is attached to a tripod. Background Bright Including Blue Skies Sunsets Dark Subject Backlit Backlit When Using Tripod People – When Moving ––– Subjects Other Than People/Landscapes Close Subjects –– Icon Background Color Gray Light Blue Orange Dark Blue Under certain conditions the icon that appears may not match the actual scene. Especially when there is an orange or blue colored background a wall for example or the “Blue Skies” icons may appear and it may not be possible to shoot with the appropriate color. If this happens try shooting in G mode p. 72. C O P Y

slide 28:

28 You can view your images on the screen. Enter Playback mode. ● Press the 1 button. The last image you took will appear. Choose an image. ● Pressing the q button will cycle through the images in reverse order. ● Pressing the r button will cycle through the images in the order they were taken. ● The images change more quickly if you keep the qr buttons pressed but they will appear coarse. ● Turning the  dial counter-clockwise displays images in reverse order while turning it clockwise displays images in the order they were taken. ● Pressing the shutter button halfway in Playback mode switches the camera to Shooting mode. ● The lens will retract after approximately 1 minute elapses. Viewing Images C O P Y

slide 29:

29 You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. ● Press the 1 button. The last image you took will appear. Choose an image to erase. ● Press the qr buttons or turn the  dial to display an image to erase. Erase the image. ● Press the a button. Erase appears. ● Press the qr buttons or turn the  dial to choose Erase then press the m button. The displayed image will be erased. ● To exit instead of erasing press the qr buttons or turn the  dial to choose Cancel then press the m button. Erasing Images C O P Y

slide 30:

30 You can easily print the pictures you take by connecting the camera to a PictBridge compatible printer sold separately using the supplied interface cable p. 2. Turn off the camera and printer. Connect the camera to the printer. ● Open the cover and insert the small end of the plug firmly into the camera terminal in the direction shown. ● Insert the cable’s larger plug into the printer. For connection details refer to the user guide provided with the printer. Turn on the printer. Turn on the camera. ● Press the 1 button to turn on the camera. Choose an image to print. ● Press the qr buttons or turn the  dial to choose an image. Print images. ● Press the c button. Printing will start. ● If you want to print additional images repeat Steps 5 and 6 after printing has completed. ● After printing has completed turn off the camera and printer and unplug the interface cable. Printing Images • Refer to the Personal Printing Guide for details on printing. • Refer to p. 38 for Canon-brand Pictbridge compliant printers. C O P Y

slide 31:

31 The camera can automatically select all settings so that you can shoot movies just by pressing the shutter button. Set the mode dial to E. Compose the shot. ● Moving the zoom lever toward i will zoom in on your subject making it appear larger. Moving the lever toward j will zoom out from your subject making it appear smaller. Focus. ● Press the shutter button halfway to focus. When the camera focuses it will beep twice and the indicator will light green. Shooting Movies Shooting Time C O P Y

slide 32:

Shooting Movies 32 Shoot. ● Press the shutter button fully. The camera will start shooting the movie and Rec and the elapsed time will appear on the screen. ● Once shooting begins take your finger off the shutter button. ● If you change the composition of your shot during shooting the focus will stay the same but the brightness and tone will automatically adjust. You can also zoom in and out with the zoom lever during shooting. ● Do not touch the microphone while shooting. ● Operational sounds will be recorded in the movie. Stop shooting. ● Press the shutter button fully again. The camera will beep once and stop shooting the movie. The indicator will blink green and the movie will record to the memory card. Shooting will automatically stop when the memory card fills. Estimated Shooting Times • Shooting times are based on default settings. • Recording will automatically stop when either the clip file size reaches 4 GB or the recording time reaches approximately 1 hour. • Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 4 or higher memory cards are recommended. Elapsed Time Microphone Memory Card 2GB 8GB Shooting Time 22 min. 45 sec. 1 hr. 30 min. 57 sec. C O P Y

slide 33:

33 You can view your movies on the screen. Enter Playback mode. ● Press the 1 button. The last image you shot will appear. appears on movies. Choose a movie. ● Press the qr buttons or turn the  dial to choose a movie then press the m button. The movie control panel will appear on the screen. Play the movie. ● Press the qr buttons or turn the  dial to choose Play then press the m button. The movie will play. ● You can pause/resume the movie by pressing the m button again. ● Press the op buttons to adjust the volume. After the movie finishes appears. Viewing Movies When watching a movie on a computer frames may drop it may not play smoothly and the audio may stop suddenly depending on the computer’s capabilities. If you use the supplied software to copy the movie back onto the memory card you can play back the movie smoothly with the camera. For enhanced playback you can also connect the camera to a TV. C O P Y

slide 34:

34 You can use the included software to transfer your camera images to a computer. If you are already using ZoomBrowser EX/ImageBrowser/Digital Photo Professional install the software from the included CD-ROM overwriting your current installation. System Requirements Windows Macintosh OS Windows Vista including Service Pack 1 and 2 Windows XP Service Pack 2 Service Pack 3 Computer model The above OS should be pre-installed on computers with built-in USB ports. CPU Viewing images Pentium 1.3 GHz or higher Viewing movies Core2 Duo 1.66 GHz or higher RAM 1GB or more Interface USB Free Hard Disk Space ZoomBrowser EX: 200 MB or more PhotoStitch: 40 MB or more Digital Photo Professional: 200 MB or more Display 1024 x 768 pixels or higher For Windows XP Microsoft .NET Framework 3.0 or later max. 500 MB must be installed. Installation may take some time depending on your computer’s capabilities. OS Mac OS X v10.4 – v10.5 Computer model The above OS should be pre-installed on computers with built-in USB ports. CPU Viewing images PowerPC G4/G5 or Intel Processor Viewing movies Core Duo 1.66 GHz or higher RAM 1GB or more Interface USB Free Hard Disk Space ImageBrowser: 300 MB or more PhotoStitch: 50 MB or more Digital Photo Professional: 200 MB or more Display 1024 x 768 pixels or higher Transferring Images to a Computer C O P Y

slide 35:

Transferring Images to a Computer 35 Preparations Windows Vista and Mac OS X v10.5 are used for these explanations. Install the software. Windows Place the DIGITAL CAMERA Solution Disk in the computer’s CD-ROM drive. ● Place the supplied CD-ROM DIGITAL CAMERA Solution Disk p. 2 into the computer’s CD-ROM drive. Begin installation. ● Click Easy Installation and follow the onscreen instructions to proceed with the installation. ● If the User Account Control window appears follow the on-screen instructions to proceed. When the install finishes click Restart or Finish. Remove the CD-ROM. ● Remove the CD-ROM when your desktop screen appears. Macintosh ● Place the CD-ROM in the computer’s CD- ROM drive and double-click the icon. ● Click Install and follow the onscreen instructions to proceed with the installation. Connect the camera to the computer. ● Turn off the camera. C O P Y

slide 36:

Transferring Images to a Computer 36 ● Using the procedures from Step 2 on p. 30 connect the camera to the computer using the supplied interface cable. Turn on the camera. ● Press the 1 button to turn on the camera. Open CameraWindow. Windows ● Click Downloads Images From Canon Camera using Canon CameraWindow. CameraWindow will appear. ● If CameraWindow does not appear click the Start menu and choose All Programs followed by Canon Utilities CameraWindow CameraWindow CameraWindow. Macintosh CameraWindow will appear when you establish a connection between the camera and computer. ● If CameraWindow does not appear click the CameraWindow icon on the Dock the bar which appears at the bottom of the desktop. Transfer Images ● Click Import Images from Camera and then click Import Untransferred Images. All images that have not yet been transferred will transfer to your computer. Transferred images will be sorted by date and saved in separate folders in the Pictures folder. C O P Y

slide 37:

Transferring Images to a Computer 37 ● After the transfer finishes click to close CameraWindow then turn off the camera and unplug the cable. ● For further operations refer to the Software Guide. You can choose the software that displays after images have been transferred. Click the icon in the upper right corner of CameraWindow then click Import in the screen that appears. Then choose the After Import tab. After making your settings press OK and close the Preferences screen. Click the icon in the upper right corner of Camera Window to start the selected software. Changing the software that displays after images have been transferred You can transfer images without installing the included software by simply connecting your camera to a computer. There are however the following limitations. • After connecting to the camera it may take a few minutes until you can transfer images. • The camera information may not display correctly. • Movies will not transfer correctly. • Images shot vertically may be transferred in the horizontal orientation. • Protection settings for images may be lost when transferred to a computer. • RAW images or JPEG images recorded at the same time as RAW images may not transfer. • There may be problems transferring images or image information correctly depending on the version of the operating system in use the file size or the software in use. C O P Y

slide 38:

38 Accessories Interface Cable IFC-400PCU 1 AV Cable AVC-DC400 1 1 Also available for purchase separately. 2 See the user guide supplied with the printer for more information on the printer and interface cables. 3 Speedlite 430EX and 580EX may also be used. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION. DIGITAL CAMERA Solution Disk Neck Strap NS-DC9 Compact Power Adapter CA-PS700 AC Adapter Kit ACK-DC50 Canon-Brand PictBridge Compliant Printers 2 Memory Card Card Reader Windows/ Macintosh Power Cord Battery Pack NB-7L 1 with Terminal Cover Compact Photo Printers SELPHY series Inkjet Printers PIXMA series Battery Charger CB-2LZ/CB-2LZE 1 DC Coupler DR-50 Supplied with Camera C O P Y

slide 39:

Accessories 39 Video IN Terminal Audio IN Terminal Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire etc. caused by the malfunction of non-genuine Canon accessories e.g. a leakage and/or explosion of a battery pack. Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories although you may request such repairs on a chargeable basis. High-Definition TV HDMI Cable HTC-100 Speedlite 220EX/270EX/ 430EX II 3 /580EX II 3 Speedlite Transmitter ST-E2 Speedlite Bracket SB-E2 High-Power Flash HF-DC1 Macro Twin Lite MT-24EX TV/Video Macro Ring Lite MR-14EX Off Camera Shoe Cord OC-E3 Bracket BKT-DC1 Tele-converter TC-DC58D Conversion Lens Adapter LA-DC58K Waterproof Case WP-DC34 Canon Waterproof Case Weight WW-DC1 Ring Accessory Kit RAK-DC2 Remote Switch RS60-E3 Soft Case SC-DC65 series C O P Y

slide 40:

40 Some accessories are not sold in some regions or may no longer be available. • Speedlite 220EX/270EX/430EX II/580EX II: Speedlites for Canon EOS models. Subjects are optimally illuminated for crisp natural images. 430EX and 580EX may also be used. • Speedlite Bracket SB-E2: Prevents unnatural shadows from appearing on the sides of objects when shooting from a vertical position and is useful for shooting portraits. The Off Camera Shoe Cord OC-E3 is supplied with this bracket. • Speedlite Transmitter ST-E2: Allows the wireless control of slave remote Speedlite flashes except the Speedlite 220EX and 270EX. • Macro Twin Lite MT-24EX/Macro Ring Lite MR-14EX: Specially designed for a wider range of macro shooting with a flash. The Conversion Lens Adapter LA- DC58K Off Shoe Camera Cord OC-E3 and Bracket BKT-DC1 all sold separately are required to attach these flashes to the camera. • Off Camera Shoe Cord OC-E3: Allows you to use a Speedlite up to 60 cm 2.0 ft. away from the camera. • Bracket BKT-DC1: Used to attach a Macro Ring Lite or Macro Twin Lite flash to the camera. • High-Power Flash HF-DC1: This attachable supplementary flash can be used to capture photographic subjects that are too distant for the built-in flash to illuminate. • Tele-converter TC-DC58D: Allows shooting at a focal length approximately 1.4x that of the camera itself. • Conversion Lens Adapter LA-DC58K: Required for attaching the teleconverter Macro Ring Lite or Macro Twin Lite flash to the camera. • Ring Accessory Kit RAK-DC2: A set of lens rings in three different colors. • Remote Switch RS60-E3: Connecting the remote switch to the camera allows you to release the shutter button without touching the camera thereby reducing the risk of camera shake. • Waterproof Case WP-DC34: Use this case to take underwater shots at depths of up to 40 meters 130 ft. or to shoot in the rain at the beach or on the ski slopes. • Soft Case SC-DC65 series: Handle with care as the case’s leather material may discolor. • HDMI Cable HTC-100: Used to connect the camera to the HDMI™ terminal on a high-definition TV set. • AC Adapter Kit ACK-DC50: Lets you power the camera using household power when using the camera for an extended period of time or when connecting to a computer or printer. Cannot be used to charge the battery inside the camera. • Battery Charger CB-2LZ/CB-2LZE • Battery Pack NB-7L Separately Sold Accessories C O P Y

slide 41:

41 Learning More This chapter explains the parts of the camera and what appears on the screen as well as the basic operating instructions. 2 C O P Y

slide 42:

42 Mode Dial Use the mode dial to change the Shooting mode. Components Guide Lamp Self-Timer Lamp p. 68 / AF Assist Beam p. 152 / Red-Eye Reduction Lamp p. 153 Lens Zoom Lever Shooting: i Telephoto / j Wide Angle p. 25 Playback: k Magnify / g Index p. 122 Shutter Button p. 24 Mode Dial Hot Shoe p. 167 Flash pp. 63 73 Exposure Compensation Lamp p. 73 Exposure Compensation Dial p. 73 Strap Mount p. 13 Speaker Ring Release Button pp. 163 169 Tripod Socket Memory Card / Battery Cover p. 16 DC Coupler Cable Cover p. 162 Low Light Mode Allows you to shoot in dimly lit places with reduced camera shake and subject blur p. 60. Quick Shot Mode Use the viewfinder to shoot without missing a great shot p. 61. P Tv Av M C1 C2 Mode You can make settings such as the shutter speed and aperture value in order to take the picture you want pp. 72 100 101 102 108. Auto Mode You can leave it to the camera to select settings p. 25. Special Scene Mode The camera can automatically select all settings appropriate for the conditions so that you can take images just by pressing the shutter button p. 56. Movie Mode For shooting movies p. 31. C O P Y

slide 43:

Components Guide 43 Control Dial Turning the control dial allows you to perform operations such as choosing items or switching images. 1 Button When the lens is extended you can switch between Shooting and Playback modes. When the lens is retracted you can use this button to turn the camera on and off in Playback mode. Short Cut p. 156 / c Direct Print p. 30 Button Light Metering p. 93 / d Jump p. 123 Button AF Frame Selector pp. 88 89 / a Single Image Erase p. 29 Button Screen LCD Monitor pp. 19 44 Diopter Adjustment Dial p. 85 Viewfinder p. 85 Indicators p. 47 1 Playback Button pp. 28 121 ISO Speed Lamp p. 78 Microphone p. 32 ISO Speed Dial p. 78 Power Button / Power Lamp p. 47 ¤ AE Lock pp. 96 116 / FE Lock p. 97 Button HDMI Terminal p. 129 Remote Terminal p. 166 A/V OUT Audio/Video Output DIGITAL Terminal p. 128 n Menu Button p. 49 l Display Button p. 45 f Manual Focus p. 94/ o Button e Macro p. 77 / q Button Control Dial p. 43 m FUNC./SET Function/Set Button p. 48 h Flash pp. 63 73 / r Button Q Self-Timer pp. 67 68 / p Button C O P Y

slide 44:

44 Shooting Information Display : Standard : Held vertically When shooting the camera detects if it is held vertically or horizontally and adjusts settings accordingly for the best shot. It also detects orientation during playback so you can hold the camera in either orientation and it will automatically rotate images for correct viewing. This function may not operate correctly when the camera is pointed straight up or down. Information Displayed on the Screen Battery Charge Indicator p. 15 Camera Orientation White Balance p. 79 White Balance Correction p. 80 My Colors p. 82 i-Contrast p. 103 Drive Mode p. 81 Histogram p. 46 Metering Modes p. 93 Compression p. 74 Recording Pixels p. 74 Recordable Shots p. 18 Remaining Time / Elapsed Time p. 32 Self-Timer pp. 67 68 83 84 Digital Zoom Magnification p. 64 / Digital Tele-Converter p. 65 Focus Bracketing p. 95 Macro p. 77 Manual Focus p. 94 Shooting Mode Flash Mode pp. 63 73 99 Red-Eye Correction p. 104 Flash Exposure Compensation p. 105 Flash Output p. 106 Spot AE Point Frame p. 93 Date Stamp p. 66 ISO Speed p. 78 Grid Lines p. 154 AE Lock pp. 96 116 FE Lock p. 97 Time Zone p. 150 Shutter Speed Image Stabilizer p. 155 Aperture Value pp. 101 102 Exposure Compensation p. 73 AF Frame p. 26 AEB Shooting p. 98 ND Filter p. 99 Blink Detection p. 107 Exposure Level Indicator p. 102 MF Indicator p. 94 C O P Y

slide 45:

Information Displayed on the Screen 45 Switching the Display You can change the display using the l button. Playback Detailed Information Display Display 1 Display 2 Screen Off Print List p. 143 My Category p. 135 Shooting Mode ISO Speed p. 78 Exposure Compensation p. 73 / Exposure Shift Amount p. 116 ND Filter p. 99 White Balance p. 79 White Balance Correction p. 80 Histogram p. 46 Image Editing pp. 138 – 142 Compression p. 74 Movies Recording Pixels p. 74 Battery Charge Indicator p. 15 Metering Modes p. 93 Folder Number – File Number p. 148 Displayed image number / Total number of images Shutter Speed pp. 100 102 Aperture Value Image Quality Movies p. 115 Flash Exposure Compensation p. 105 Flash Output p. 106 My Colors pp. 82 140 i-Contrast pp. 103 141 Red-Eye Correction pp. 104 142 File Size p. 74 Still Images: Recording Pixels p. 74 Movies: Movie Length p. 115 Protect p. 130 Macro p. 77 Manual Focus p. 94 Shooting Date and Time C O P Y

slide 46:

Information Displayed on the Screen 46 Switching the Display You can change the display using the l button. Display in Dark Conditions during Shooting The display automatically brightens when shooting in dark conditions allowing you to check the composition Night Display function. However the brightness of the image on the screen and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject may appear somewhat jagged on the screen. This has no effect on the recorded image. Overexposure Warning during Playback In “Detailed Information Display” p. 45 overexposed areas of the image flash on the screen. Histogram ● The graph that appears in “Detailed Information Display” p. 45 is called the histogram. The histogram shows the distribution and amount of brightness of an image. When the graph approaches the right side the image is bright but when it approaches the left side the image is dark and in this way you can judge the exposure. The histogram can also be displayed while shooting p. 154. You can also switch the display by pressing the l button while the image displays shortly after shooting. However Simple Information will not display. You can set the display that appears first. Press the n button to choose the 4 tab. Then set Review Info. No Information Display Simple Information Display Focus Check Display p. 126 Detailed Information Display Dark Bright High Low C O P Y

slide 47:

47 The indicators on the back of the camera p. 43 and the power lamp p. 43 will light or blink depending on the camera’s status. Color Status Operation Status Upper indicator Green Lit Camera ready p. 26 / Display off p. 150 Blinking Recording an image / Reading data / Transmitting data p. 25 Orange Lit Shooting preparation complete flash on p. 25 Blinking Camera shake warning p. 63 Lower indicator Yellow Lit e p. 77 Manual focus p. 94 AF lock p. 91 Blinking Proximity warning p. 27 / Cannot focus p. 176 Power lamp Green Lit Power on Blinking Battery depleted p. 15 When the indicator blinks green data is being recorded/read or various information is being transmitted. Do not turn off the power open the memory card slot/battery cover shake or jolt the camera. These actions may corrupt the image data or cause the camera or memory card to malfunction. Indicators C O P Y

slide 48:

48 Commonly used shooting functions can be set with the FUNC. menu. The menu items and options differ depending on the mode pp. 180 – 183. Choose a shooting mode. ● Set the mode dial to the desired shooting mode. Display the FUNC. menu. ● Press the m button. Choose a menu item. ● Press the op buttons to choose a menu item. The available options for the menu item appear in the lower part of the screen. Choose an option. ● Press the qr buttons or turn the  dial to choose an option. ● You can also choose settings by pressing the l button on options that display . Make the setting. ● Press the m button. The shooting screen will reappear and the setting you chose will display on the screen. FUNC. Menu – Basic Operations Available Options Menu Items C O P Y

slide 49:

49 Various functions can be set from the menus. The menu items are organized under tabs such as for shooting 4 and playback 1. The available menu items differ depending on the mode pp. 182 – 185. Display the menu. ● Press the n button. Choose a tab. ● Press the qr buttons or move the zoom lever p. 42 left or right to choose a tab. Choose a menu item. ● Press the op buttons or turn the  dial to choose a menu item. ● Some items require you to press the m button or r button to display a submenu in which you change the setting. Choose an option. ● Press the qr buttons to choose an option. Make the setting. ● Press the n button. The normal screen will reappear. Menu – Basic Operations C O P Y

slide 50:

50 You can silence or adjust the volume of camera sounds. Muting Sounds Display the menu. ● Press the n button. Choose Mute. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose Mute then press the qr buttons to choose On. Adjusting the Volume Display the menu. ● Press the n button. Choose Volume. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose Volume then press the m button. Change the volume. ● Press the op buttons or turn the  dial to choose an item then press the qr buttons to adjust the volume. Changing the Sound Settings C O P Y

slide 51:

51 The screen brightness can be changed in two ways. With the Menu Display the menu. ● Press the n button. Choose LCD Brightness. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose LCD Brightness. Change the brightness. ● Press the qr buttons to change the brightness. ● Press the n button again to complete the setting. With the l Button ● Press the l button for more than one second. The screen increases to maximum brightness regardless of the setting in the 3 tab. ● Pressing the l button again for more than one second will return the screen to the original brightness. Changing the Screen Brightness • The next time you turn on the camera the screen will be at the brightness setting chosen in the 3 tab. • When you have set the brightness to its highest setting in the 3 tab you cannot change the brightness with the l button. C O P Y

slide 52:

52 When you have mistakenly changed a setting you can reset the camera to the default settings. Display the menu. ● Press the n button. Choose Reset All. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose Reset All then press the m button. Reset the settings. ● Press the qr buttons or turn the  dial to choose OK then press the m button. The camera will reset to the default settings. • In the 3 tab Date/Time p. 20 Language p. 22 Video System p. 128 Time Zone p. 150 and the image registered as Start-up Image p. 159. • The saved data for custom white balance p. 79. • Colors that were chosen in Color Accent p. 109 or Color Swap p. 110. • ISO speed p. 78 or exposure compensation p. 73 values. Returning the Camera to Default Settings Are there functions that cannot be reset C O P Y

slide 53:

53 Perform low level formatting when you think that the recording/reading speed of a memory card has dropped. As you cannot retrieve the erased data exercise adequate caution before low level formatting the memory card. Display the menu. ● Press the n button. Choose Format. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial to choose Format then press the m button. Perform the low level format. ● Press the op buttons or turn the  dial to choose Low Level Format then press the qr buttons to display . ● Press the opqr buttons or turn the  dial to choose OK then press the m button. Low level formatting starts. When the Memory card error message appears or when the camera does not work correctly low level formatting the memory card may solve the problem. Copy the images from the memory card to a computer or other device before low level formatting. Low Level Memory Card Formatting About low level formatting • Low level formatting may take longer than standard formatting p. 23 since all recorded data are erased. • You can stop a low level format of a memory card by choosing Stop. When stopping low level formatting the data will be erased but the memory card can be used without problem. C O P Y

slide 54:

54 To save battery power the camera shuts down automatically when it is not operated for a certain time. Power Saving during Shooting The monitor will turn off approximately 1 minute after the camera is last operated. After about 2 more minutes the lens will retract and the power will turn off. When the monitor has turned off but the lens has not yet retracted pressing the shutter button halfway p. 24 turns on the monitor and shooting can continue. Power Saving during Playback The power will turn off approximately 5 minutes after the camera is last operated. You can check the current time. ● Press and hold the m button. A screen like that on the left appears showing the current time. ● If you hold the camera vertically while using the clock function it will switch to vertical display. Press the qr buttons or turn the  dial to change the display color. ● Press the m button to cancel the clock display. • You can turn off the Power Saving Function p. 149. • You can adjust the time before the monitor turns off p. 150. Power Saving Function Auto Power Down Clock Functions When the camera power is off press and hold the m button then press the power button to display the clock. C O P Y

slide 55:

55 Shooting in Special Conditions and Commonly Used Functions This chapter explains how to shoot in different conditions as well as how to use common functions such as the flash and self-timer. • When you choose a Shooting mode that matches a particular set of conditions the camera will automatically select any necessary settings. All you need do is press the shutter button to take an optimized picture. • This chapter assumes the mode dial is set to A for “Turning the Flash Off” p. 63 to “Using the Face Self-Timer” p. 68. When shooting in a scene mode check which functions are available in that mode pp. 180 – 183. 3 C O P Y

slide 56:

56 The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Choose a Shooting mode. ● Set the mode dial to K. ● Turn the  dial to choose a shooting mode. Shoot. I Take portraits Portrait ● Produces a soft effect when photographing people. JTake landscapes Landscape ● Lets you shoot majestic landscapes. F Take snapshots at night Night Snapshot ● Lets you take beautiful snapshots of people against city nightscapes or night backgrounds. ● If you hold the camera firmly you can take pictures with reduced camera shake even without a tripod. Shooting in Various Conditions C O P Y

slide 57:

Shooting in Various Conditions 57 V Take shots of kids and pets KidsPets ● Lets you capture subjects that move around such as children and pets without missing photo opportunities. ’ Take indoor shots Indoor ● Lets you shoot indoors with natural colors. Take shots of moving subjects Sports ● Shoots continuous images while focusing automatically. U Shoot sunsets Sunset ● Lets you take shots of sunsets in vivid colors. In F V H or mode images may appear coarse because the ISO speed p. 78 is increased to match the shooting conditions. C O P Y

slide 58:

Shooting in Various Conditions 58 Take nightscapes Night Scene ● Lets you take beautifully lit city nightscapes or night backgrounds. ● You can also take beautifully lit pictures of people along with the backgrounds due to the slower shutter speed. t Take shots of fireworks Fireworks ● Lets you take shots of fireworks in vivid colors. w Take shots of people at the beach Beach ● Lets you take bright shots of people on sandy beaches where the reflected sunlight is strong. S Shoot Underwater ● While using the Waterproof Case WP-DC34 you can shoot underwater landscapes and creatures with natural tones. y Take shots of aquatic life in an aquarium Aquarium ● Lets you take natural-colored shots of aquatic life in indoor aquariums. C O P Y

slide 59:

Shooting in Various Conditions 59 OTake shots of foliage Foliage ● Lets you shoot trees and leaves such as new growth autumn leaves or blossoms in vivid colors. P Take shots of people in snow Snow ● Lets you take bright natural-colored shots of people against snowy backgrounds. • In S or y mode images may appear coarse because the ISO speed p. 78 is increased to match the shooting conditions. • In mode make sure the subject does not move until the shutter sound plays even after the flash fires. • In or t mode attach the camera to a tripod to prevent the camera from moving and blurring the image. Additionally you are recommended to set IS Mode to Off p. 155. C O P Y

slide 60:

60 The ISO speed will be set automatically between ISO320 and ISO12800. Depending on the scene the ISO speed will be set higher and the shutter speed faster than in A mode so that you can shoot in dark places with reduced camera shake and subject blur. Recommended for shooting in candlelight or similarly lit scenes. Set the camera to mode. ● Set the mode dial to . Shoot. Shooting in Mode Low Light Mode In Low Light mode recording pixels are fixed to M size 1824 x 1368. C O P Y

slide 61:

61 Use the viewfinder p. 43 to shoot. The camera continuously adjusts the focus and exposure on the subject in the viewfinder so you never miss a great shot. Set the camera to 8 mode. ● Set the mode dial to 8. The screen in Step 2 displays. Adjust the settings. ● After pressing the m button press the opqr buttons to choose an item. ● Turn the  dial to choose an option then press the m button. ● Pressing the l button will turn off the display. Press once more to restore the display. Adjust the focus and exposure. ● Arrange your subject in the viewfinder. If a face is detected the focus and exposure will be adjusted to the face. If no faces are detected the focus and exposure will be adjusted to the subject in the center of the viewfinder. Shoot. ● When you want to take a picture press the shutter button halfway then quickly press the shutter button fully. The image will be displayed on the screen. Approximate Number of Shots That Can Be Taken in 8 Mode In 8 mode the camera is continuously adjusting focus and exposure rapidly depleting the battery. The approximate number of shots that can be taken is 340 p. 15. Shooting in 8 Quick Shot Mode C O P Y

slide 62:

Shooting in 8 Quick Shot Mode 62 Settings Screen The area visible in the viewfinder may differ slightly from the recorded image. • Once the shutter button is pressed halfway the focus will be locked p. 86. • You cannot use the screen when shooting. Use the viewfinder for shooting. Shutter Speed pp. 100 102 Exposure Compensation p. 73 White Balance p. 79 My Colors p. 82 Histogram p. 46 Aperture Value pp. 101 p. 102 Recording Pixels p. 74 AE Lock p. 96 / FE Lock p. 97 ISO Speed p. 78 Flash Exposure Compensation p. 105 Flash Mode pp. 63 73 Drive Mode p. 81 Self-Timer pp. 67 68 83 84 Compression Image Quality p. 74 Camera Orientation p. 44 Image Stabilizer p. 155 Recordable Shots p. 18 Battery Charge Indicator p. 15 Red-Eye Correction p. 104 Date Stamp p. 66 i-Contrast p. 103 Functions other than those listed on the setting screen or those accessible by pressing the n button are not available p. 182. C O P Y

slide 63:

63 You can shoot with the flash turned off. Press the r button. Choose . ● Press the qr buttons or turn the  dial to choose then press the m button. will appear on the screen. ● Follow the steps above to return the setting to . When you press the shutter button halfway in low light conditions where camera shake is likely the indicator will blink orange and a flashing will appear on the screen. Attach the camera to a tripod to prevent it from moving. Turning the Flash Off What if the indicator blinks orange and a flashing appears C O P Y

slide 64:

64 You can use the digital zoom to zoom up to a maximum of 20x and capture subjects that are too far away for the optical zoom p. 25 to enlarge. The images may appear coarse however depending on the recording pixel setting p. 74 and the zoom factor used. Move the zoom lever toward i. ● Hold the lever until zooming stops. The zoom will stop when the largest possible zoom factor without image deterioration has been reached and the zoom factor will appear. Move it toward i again. The digital zoom will zoom in even further on the subject. Zoom Factors at which Images Deteriorate To turn off the digital zoom press the n button choose the 4 tab and choose Digital Zoom and the Off option. Zooming in More Closely on Subjects Digital Zoom Turning off the digital zoom Recording Pixels Optical Zoom 28 – 140 mm Digital Zoom 140 – 560 mm : No image deterioration zoom factor appears white : Image deterioration zoom factor appears blue 5.0x 5.0x 7.0x 11x 20x : Maximum zoom factor without deterioration Safety Zoom Focal length 35mm equivalent C O P Y

slide 65:

Zooming in More Closely on Subjects Digital Zoom 65 Digital Tele-Converter The focal length of the lens can be increased by an equivalent of 1.4x or 2.3x. This enables a faster shutter speed and less chance of camera shake than the zoom including digital zoom used by itself at the same zoom factor. The images may appear coarse however depending on the combination of recording pixel p. 74 and digital tele-converter settings used. Choose Digital Zoom. ● Press the n button and choose the 4 tab then choose Digital Zoom. Accept the setting. ● Press the qr buttons to choose 1.4x or 2.3x. ● Pressing the n button will restore the shooting screen. The view will be enlarged and the zoom factor will appear on the screen. ● To return to standard digital zoom choose Digital Zoom and the Standard option. Combinations that Cause Image Deterioration • Using 1.4x at a recording pixel setting of or will cause image deterioration the zoom factor will display in blue. • Using 2.3x at a recording pixel setting of or will cause image deterioration the zoom factor will display in blue. Not available when shooting in and . • The respective focal lengths when using 1.4x and 2.3x are 39.2 – 196 mm and 64.4 – 322 mm 35mm film equivalent. • The digital tele-converter cannot be used together with the digital zoom. • Not available when shooting in and . C O P Y

slide 66:

66 You can insert the shooting date and time in the lower right corner of an image. Once inserted however they cannot be deleted. Be sure to check beforehand that the date and time are correctly set p. 20. Choose Date Stamp. ● Press the n button. ● Press the qr buttons to choose the 4 tab then press the op buttons or turn the  dial to choose Date Stamp. Accept the setting. ● Press the qr buttons to choose Date or Date Time. ● Press the n button again to complete the setting. DATE will appear on the screen. Shoot. The shooting date and time will be recorded in the image’s lower right corner. ● To restore to the original setting choose Off in Step 1. • Use the DPOF print settings p. 144 to print. • Use the included software to print. Refer to the Software Guide for details. • Connect the camera to a printer to print. Refer to the Personal Printing Guide for details. Inserting the Date and Time Inserting and printing the date and time in images without an embedded date and time The date cannot be recorded onto images. C O P Y

slide 67:

67 The self-timer can be used to shoot a group photo that includes the camera operator. The camera will activate approximately 10 seconds after the shutter button is pressed. Press the p button. Choose Ò. ● Press the op buttons or turn the  dial to choose Ò then press the m button. Once set Ò will appear. Shoot. ● Press the shutter button halfway to focus on the subject then press it fully. When the self-timer starts the lamp blinks and the self-timer sound plays. Two seconds before the shutter releases the lamp and sound speed up the lamp remains lit when the flash will fire. ● To cancel shooting with the self-timer after countdown has started press the p button. ● To restore the original setting choose in Step 2. Using the Self-Timer You can change the delay time and number of shots p. 84. C O P Y

slide 68:

68 Once you compose the shot such as for a group photo press the shutter button and enter the composition the camera will take three shots in a row two seconds after it detects your face p. 88. Choose ". ● Follow Step 2 on p. 67 and choose ". Compose the shot and press the shutter button halfway. ● Make sure a green frame appears on the face focused on and white frames appear on other faces. Press the shutter button fully. The camera will enter shooting stand-by and Look straight at camera to start count down will appear on the screen. The lamp will blink and the self-timer sound will play. Join the subjects and look at the camera. When the camera detects a new face the lamp and sound will speed up the lamp remains lit when the flash will fire and two seconds later the shutter will release. ● To cancel shooting with the self-timer after countdown has started press the p button. The second and third shots will continue in succession. ● To restore the original setting choose in Step 2 on p. 67. Even if your face is not detected after joining the subjects the shutter will release approximately 30 seconds later. Using the Face Self-Timer What if a face is not detected C O P Y

slide 69:

Using the Face Self-Timer 69 For the screen in Step 1 press the n button then press the qr buttons or turn the  dial to change the number of shots. Press the m button to accept the setting. Changing the number of shots C O P Y

slide 70:

70 C O P Y

slide 71:

71 Choosing Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills. • This chapter assumes that the mode dial is set to G. • G stands for Program AE. • Before attempting to shoot using a function explained in this chapter in modes other than G mode check if the function is available in those modes pp. 180 – 183. 4 C O P Y

slide 72:

72 You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. Set the mode dial to G. Adjust the settings according to your purposes pp. 73 – 86. Shoot. If a correct exposure cannot be obtained when pressing the shutter button halfway the shutter speed and aperture value are shown in orange. Try the following settings to obtain the correct exposure. • Turn on the flash p. 73 • Choose a higher ISO speed p. 78 Shooting in Program AE What if the shutter speed and aperture value are displayed in orange C O P Y

slide 73:

73 You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of –2 to +2. Adjust the brightness. ● Turn the exposure compensation dial to correct the exposure. In shooting modes that allow exposure correction the exposure compensation lamp lights orange. When shooting in AEB p. 98 the AEB exposure compensation range will display. You can make the flash fire every time you shoot. At maximum wide angle the flash range is approximately 50 cm – 7.0 m 1.6 – 23 ft. and at maximum telephoto it is 50 cm – 4.0 m 1.6 – 13 ft. Choose h. ● After pressing the r button press the qr buttons or turn the  dial to choose h then press the m button. Once set h will appear. Adjusting the Brightness Exposure Compensation Turning the Flash On C O P Y

slide 74:

74 You can choose from seven recording pixels settings. Choose the recording pixels. ● After pressing the m button press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the  dial to choose an option then press the m button. The setting you chose will display on the screen. You can choose from the following two levels of compression ratio image quality: Fine Normal. Choose the recording pixels. ● After pressing the m button press the op buttons to choose . Choose the compression ratio. ● Press the l button. ● Press the qr buttons or turn the  dial to choose an option then press the m button. The setting you chose will display on the screen. Changing the Recording Pixels Image Size Changing the Compression Ratio Image Quality C O P Y

slide 75:

Changing the Compression Ratio Image Quality 75 Approximate Values for Recording Pixels and Compression Ratio • The values in the table are measured according to Canon standards and may change depending on the subject memory card and camera settings. Approximate Values for Paper Size ● Suitable for sending images as e-mail attachments. ● For printing on wide size paper. Recording Pixels Compression Ratio Single Image Data Size Approx. KB Number of Recordable Images 2GB 8GB Large 10 M/3648 x 2736 2565 749 2994 1226 1536 6140 Medium 1 6 M/2816 x 2112 1620 1181 4723 780 2363 9446 Medium 2 4 M/2272 x 1704 1116 1707 6822 556 3235 12927 Medium 3 2 M/1600 x 1200 558 3235 12927 278 6146 24562 Small 0.3 M/640 x 480 150 10245 40937 84 15368 61406 Widescreen 3648 x 2048 1920 1007 4026 918 2048 8187 RAW 3648 x 2736 — 12825 135 540 + 3648 x 2736 — 15390 113 455 5" x 7" A3 A4 Letter size Postcard size 3.5" x 5" A2 C O P Y

slide 76:

76 A RAW image is raw data recorded with nearly no deterioration in image quality resulting from image processing inside the camera. You can use the supplied software to broadly adjust the image with minimal loss in image quality. Choose . ● Follow Steps 1 and 2 on p. 74 to choose . Shoot. • JPEG images // /// When JPEG images are recorded the images are processed inside the camera for optimum image quality and also compressed to allow a larger number of images to be stored on the memory card. However the compression process is irreversible meaning that the raw data cannot be recovered once it has been compressed. Moreover the image processing results in a deterioration in quality. • RAW images A RAW image is raw data recorded with nearly no deterioration in image quality resulting from image processing inside the camera. This data cannot be used as is for viewing or printing on a computer. The supplied software Digital Photo Professional must first be used to convert the image data to a JPEG or TIFF file. When converting the image data you can adjust the image with minimal deterioration in image quality. Simultaneously Recording RAW and JPEG Images Two images a RAW image and a JPEG image will be recorded with each shot. Since a JPEG image is also recorded you can print the image or view it on a computer without using the supplied software. The file extension for RAW images is “.CR2” and the extension for JPEG images is “.JPG”. The JPEG images will be recorded with recording pixels with image compression. Shooting in RAW Differences between RAW images and JPEG images. C O P Y

slide 77:

Shooting Close-ups Macro 77 Choose Record + . ● Press the n button choose Record + from the 4 tab and then press the qr buttons to choose On. You can shoot an object at a close distance or even shoot extreme close- ups of it. The shooting range is approximately 1 – 50 cm 0.4 in. – 1.6 ft. from the end of the lens when the zoom lever is pushed to the maximum j. Choose e. ● Press the q button to choose e. The shooting mode will switch between e and with each press. Once set e will appear. • You are recommended to attach the camera to a tripod and shoot in Î to prevent the camera from moving and blurring the image p. 83. • You can reduce the AF frame size when you want to focus on a specific portion of the subject p. 89. Be sure to use the supplied software to transfer both the RAW images and the JPEG images that were recorded at the same time. Shooting Close-ups Macro How can I take better close-ups The edges of the image may darken if the flash fires. C O P Y

slide 78:

78 Choose the ISO speed. ● Turn the ISO speed dial to choose the ISO speed. When an available ISO setting is chosen the ISO speed lamp will light orange. If the chosen ISO setting is not available the ISO speed lamp will not light and will be automatically selected in D will be selected. The setting you chose will display on the screen. • Lowering the ISO speed results in sharper images but there may be an increased chance of image blurring in certain shooting conditions. • Raising the ISO speed results in a faster shutter speed reducing camera shake and letting the flash reach greater distances to the subject. The images however will appear coarse. If is insufficient to reduce blurring you are recommended to use mode p. 60. Changing the ISO Speed Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. Low High Fine weather conditions outdoor shooting. Cloudy Twilight Nightscapes Dark interiors Changing the ISO speed • When the camera is set to you can press the shutter button halfway to display the automatically set ISO speed. • In mode ISO speeds will automatically be set higher than in A mode depending on the shooting scene. p. 60 C O P Y

slide 79:

79 The white balance WB function sets the optimal white balance for natural looking colors. Choose the white balance. ● After pressing the m button press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the  dial to choose an option then press the m button. The setting you chose will display on the screen. Custom White Balance You can adjust the white balance to the light source at the shooting location. Make sure that you set the white balance under the light source of the actual scene you will shoot. ● In Step 2 above choose or . ● Make sure the entire screen is filled with a white colored subject then press the n button Press the l button when in 8 mode. The tint on the screen will change when a white balance data is set. Adjusting the White Balance Auto Automatically sets the optimal white balance for the shooting conditions. Day Light Fine weather conditions outdoor shooting Cloudy Cloudy shady twilight conditions Tungsten Tungsten bulb-type 3-wavelength fluorescent lighting Fluorescent Warm-white fluorescent cool-white fluorescent warm-white- type 3-wavelength fluorescent lighting Fluorescent H Daylight fluorescent daylight-type 3-wavelength fluorescent lighting Flash When shooting with the flash. Underwater Sets the optimal white balance for shooting underwater. Reduces blue tones to produce natural vibrant hues. Custom Manually sets a custom white balance. h S C O P Y

slide 80:

Adjusting the White Balance 80 Manually Correcting the White Balance You can manually correct the white balance. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Choose the white balance. ● After pressing the m button press the op buttons to choose then press the qr buttons or turn the  dial to choose an option. Adjust the setting. ● Press the l button to display the adjustments screen. ● Press the qrop buttons to adjust the level of correction. ● To reset the correction level press the n button. ● Press the l button to complete the setting. If you change camera settings after recording white balance data the tone may not turn out properly. • B stands for blue A for amber M for magenta and G for green. • Even if you change the white balance setting in Step 1 after making adjustments in the correction level those adjustments will be retained. However the adjustments will be reset if Custom White Balance data is recorded. • One level of the blue/amber correction is equivalent to 7 mireds of a color temperature conversion filter. Mired: Measuring unit indicating the density of a color temperature conversion filter. C O P Y

slide 81:

81 You can shoot continuously at a fixed interval. Choose a Drive mode. ● After pressing the m button press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the  dial to choose W or then press the m button. Shoot. As long as you hold the shutter button down the camera will shoot successive images. Continuous Shooting Drive Mode Description Continuous Approx. 1.1 images/sec. For continuous shooting the focus and exposure are locked when the shutter button is pressed halfway. Continuous Shooting AF Approx. 0.7 images/sec. The camera shoots continuously and focuses. The AF Frame is set to Center. Continuous Shooting LV Approx. 0.8 images/sec. The camera shoots continuously with the focus fixed to the position set in manual focus. In t the focus is fixed to the first shot. • Cannot be used with the self-timer pp. 67 68 83 84. • In mode p. 60 the shooting interval will be faster. • As the number of images increases the shooting interval may take longer. • If the flash fires the shooting interval may take longer. • When in t AF lock p. 91 or manual focus p. 94 modes will change to . C O P Y

slide 82:

82 You can change the tone of an image to sepia or black and white when shooting. Choose My Colors. ● After pressing the m button press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the  dial to choose an option then press the m button. The setting you choose will display on the screen. Changing the Tone of an Image My Colors My Colors Off — Vivid Emphasizes the contrast and color saturation for a vivid impression. Neutral Tones down the contrast and color saturation for neutral hues. Sepia Sepia tones. B/W Black and white. Positive Film Combines the effects of Vivid Red Vivid Green and Vivid Blue to produce intense natural appearing colors like those obtained with positive film. Lighter Skin Tone Makes skin tones lighter. Darker Skin Tone Makes skin tones darker. Vivid Blue Emphasizes blue tints. Makes the sky ocean and other blue subjects more vivid. Vivid Green Emphasizes green tints. Makes mountains foliage and other green subjects more vivid. Vivid Red Emphasizes red tints. Makes red subjects more vivid. Custom Color You can adjust contrast sharpness and color saturation etc. to your preference p. 83. • Not available when shooting in . • The white balance cannot be set in the and modes p. 79. • In the and mode colors other than people’s skin color may change. You may not obtain the expected results with some skin colors. C O P Y

slide 83:

Shooting Using the Two Second Self-Timer 83 Custom Color The contrast sharpness color saturation red green blue and skin tones in an image can be chosen and set from 5 different levels. s ● Follow Step 2 on p. 82 to choose then press the l button. ● Press the op buttons to choose an option then press the qr buttons or turn the  dial to choose a value. ● The more to the right the stronger/deeper the effect gets the more to the left the weaker/lighter the effect gets. ● Press the l button to accept the setting. You can set the self-timer to a delay of approximately two seconds. Choose Î. ● After pressing the p button press the op buttons or turn the  dial to choose Î then press the m button. Once set Î will appear on the screen. ● Follow Step 3 on p. 67 to shoot. Shooting Using the Two Second Self-Timer C O P Y

slide 84:

84 You can set the time delay 0 – 30 seconds and the number of shots 1 – 10 shots. Choose . ● After pressing the p button press the op buttons or turn the  dial to choose then press the n button. Choose the settings. ● Press the op buttons to choose Delay or Shots. ● Press the qr buttons or turn the  dial to choose a value then press the m button. ● Follow Step 3 on p. 67 to shoot. • Exposure and white balance settings are set with the first shot. • When you set the time delay for more than 2 seconds the self-timer lamp and sound speed up 2 seconds before the shutter releases when the flash will fire the lamp lights. Customizing the Self-Timer What if the number of shots is set to two or more shots • If the flash fires the shooting interval may be longer. • If you set a high number of shots the shooting interval may be longer. • If the memory card becomes full shooting stops automatically. C O P Y

slide 85:

85 If you want to save battery power you can use the viewfinder for shooting instead of the screen. Shooting procedures are the same as when using the screen. Turn off the screen. ● Press the l button to turn off the screen. Compose and shoot. ● Use the viewfinder to compose and shoot. Adjustments of –3.0 to +1.0m –1 dpt can be made. Shooting Using the Viewfinder The view in the viewfinder and the image taken may differ. • The viewfinder has a field of vision of approximately 77 of the actual shooting image. • You may be able to see part of the lens through the viewfinder depending on the zoom setting. C O P Y

slide 86:

86 You can use a TV to display the camera screen content while shooting. • Connect the camera to a TV as described in “Viewing Images on a TV” p. 128. • Shooting procedures are the same as when using the camera’s monitor. While you keep the shutter button pressed halfway the focus and exposure are locked. You can now recompose and shoot. This is called Focus Lock. Focus. ● Center the subject you want in focus and press the shutter button halfway. ● Confirm that a green AF Frame appears around the subject. Recompose. ● Keep the shutter button pressed halfway and recompose the scene. Shoot. ● Press the shutter button fully. TV display is not available when using HDMI Cable HTC-100 sold separately to connect the camera to a high-definition TV. Shooting Using a TV Monitor Changing the Composition with the Focus Lock C O P Y

slide 87:

87 Getting More Out of Your Camera This chapter serves as the advanced version of Chapter 4 and explains how to take pictures using various functions. • This chapter assumes that the mode dial is set to G. • The sections “Setting the Shutter Speed” p. 100 “Setting the Aperture Value” p. 101 “Setting the Shutter Speed and Aperture Value” p. 102 assume that the mode dial is set to these modes. • The section “Adjusting the Flash Output” p. 106 assumes that the mode dial is set to D. • This chapter explains the modes available in “Changing the Color and Shooting” p. 109 and “Shooting Stitch Assist Images” p. 112 and assumes the mode dial is set to K. • Before attempting to shoot using a function explained in this chapter in modes other than G mode check if the function is available in those modes pp. 180 – 183. 5 C O P Y

slide 88:

88 You can change the AF Auto Focus frame mode to match the conditions you want to shoot. Choose AF Frame. ● Press the n button choose the 4 tab and then choose the AF Frame menu item. Press the qr buttons to choose an option. Face AiAF • Detects people’s faces and sets the focus exposure evaluative metering only and white balance only. • When the camera is pointed at subjects a white frame appears on the face the camera judges to be the main subject and gray frames max. 2 will appear on other faces. When the shutter button is pressed halfway up to 9 green frames will appear on faces on which the camera focuses. However if either Servo AF p. 91 or Continuous AF p. 152 is set to On and no faces are detected the AF frame will appear in the center. Changing the AF Frame Mode You can switch between AF frames by pressing the button followed by the ¤ button. • If a face is not detected or only gray frames no white frame appear up to 9 green frames will appear on the areas the camera focuses on when the shutter button is pressed halfway. • Examples of faces that cannot be detected: • Subjects that are far away or extremely close. • Subjects that are dark or light. • Faces turned to the side or at a diagonal or faces with a portion hidden. • The camera may mistakenly identify non-human subjects as a face. • If the camera cannot focus when you press the shutter button halfway the AF frame will not appear. C O P Y

slide 89:

Changing the AF Frame Position and Size 89 FlexiZone/Center A single AF frame will be used. This is effective for focusing on a specific point. In FlexiZone you can change the position and size of the AF frame. In Center the frame will appear in the center. When the AF frame mode is set to FlexiZone p. 89 you can change the position and size of the AF frame. Press the button. The AF frame will turn orange. Move the AF frame. ● Turn the  dial to move the AF frame. ● Press the opqr buttons to make fine adjustments. ● When faces are detected each press of the n button will move the AF frame to another face. ● If you keep the button pressed the AF frame will return to the original position center. Change the AF frame size. ● Press the l button. The AF frame will become small. ● Pressing the l button again will restore the AF frame to normal size. If the camera cannot focus when you press the shutter button halfway the AF frame will turn yellow and will appear. Changing the AF Frame Position and Size C O P Y

slide 90:

Magnifying the Focal Point 90 Complete settings. ● Press the button. You can push the shutter button halfway to magnify the AF frame and check the focus. Choose AF-Point Zoom. ● Press the n button choose the 4 tab and then choose the AF-Point Zoom menu item. Press the qr buttons to choose On. Check the focus. ● Press the shutter button halfway. In Face AiAF the face selected as the main subject will appear magnified. In FlexiZone the contents of the AF frame will appear magnified. The display will not appear magnified in Face AiAF if a face cannot be detected or is too big in relation to the screen p. 88. In FlexiZone it will not appear magnified if the camera cannot focus. • The Spot AE Point frame can be linked with the AF frame p. 93. • The AF frame will be set to normal size when using Digital Zoom p. 64 or Digital Tele-Converter p. 65. Magnifying the Focal Point What if the display does not magnify The magnified display will not appear when using Digital Zoom p. 64 or Digital Tele-Converter p. 65 Servo AF p. 91 or when connected to a TV p. 86. C O P Y

slide 91:

91 The focus can be locked. After locking the focus the focal distance will not change even when you release your finger from the shutter button. Lock the focus. ● Keep the shutter button pressed halfway and press the o button. and the MF indicator appear. You can check the distance to the subject. Compose the scene and shoot. While the shutter button is pressed halfway the focus and exposure will continue to adjust allowing you to take pictures of moving subjects without missing a shot. Choose Servo AF. ● Press the n button and choose Servo AF from the 4 tab and press the qr buttons to choose On. Focus. ● The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway. Shooting with the AF Lock Shooting with Servo AF • The camera may not be able to focus in some conditions. • If a correct exposure cannot be obtained the shutter speed and aperture value display in orange. Release your finger from the shutter button then press it again halfway. • You cannot shoot with the AF lock in this mode. • The AF-Point Zoom option in the 4 tab is not available in Servo AF mode. • Not available in Self-Timer pp. 67 68 83 84. C O P Y

slide 92:

92 You can choose a specific person’s face to focus on and then shoot. Set the camera to Face AiAF p. 88. Set Face Select mode. ● Point the camera toward the face of the subject and press the button. After Face Select : On displays an orange face frame will appear around the face detected as the main subject. ● Even if the subject moves the face frame will follow the subject within a certain range. ● If a face is not detected will not appear. Choose the face on which to focus. ● If you press the qr buttons or turn the  dial the face frame will move to another face detected by the camera. ● If you press the m button or the button the frame around the chosen face will turn white. Shoot. ● Press the shutter button halfway. The face frame of the chosen face will change into a green . ● Press the shutter button fully to shoot. Pressing the l button will display the number of faces detected by the camera 35 at the most orange: main subject’s face white: detected face. Choosing the Person to Focus On Face Select Frame Confirming the number of detected faces Pressing the op buttons in Step 3 and choosing or holding down the button in Step 4 will cancel Face Select mode. C O P Y

slide 93:

93 You can change the Metering mode brightness measuring function to match the shooting conditions. Choose the Metering mode. ● After pressing the button turn the  dial to choose the Metering mode. Linking the Spot AE Point Frame to the AF Frame Choose . Set the AF Frame to FlexiZone p. 89. Choose Spot AE Point. ● Press the n button choose the 4 tab and then choose Spot AE Point menu item. Press the qr buttons to choose AF Point. The Spot AE Point frame p. 89 will be linked to the AF frame that was moved. Changing the Metering Mode Evaluative Suitable for standard shooting conditions including back lit shots. Automatically adjusts the exposure to match the shooting conditions. Center Weighted Avg. Averages the light metered from the entire frame but gives greater weight to the center. Spot Only meters within the Spot AE Point frame that appears at the center of the screen. The Spot AE Point frame can be linked to the AF frame. C O P Y

slide 94:

94 You can use manual focus when auto focus is not possible. If you press the shutter button halfway after roughly focusing manually you can fine tune the focus. Choose f. ● Press the o button. and the MF indicator will appear. Focusing roughly. ● Using the bar that shows the distance display and AF point zoom as a guide turn the  dial while looking at the magnified display to adjust the focus. The image at the center of the AF frame is displayed enlarged. Fine tuning the focus. ● If you press the shutter button halfway or press the button you can fine tune the focus Safety MF. Shooting in Manual Focus Mode • You cannot change the AF frame setting or size while focusing manually p. 88. If you want to change the AF frame mode or size cancel Manual focus mode first. • In order to focus accurately you are recommended to fix the camera to a tripod. • Magnified display cannot be used with the Digital Zoom p. 64 the Digital Tele-Converter p. 65 or when connected to a TV p. 86 however the focus can be adjusted. • If MF-Point Zoom is set to Off in the 4 tab the magnified display will not be available. • If Safety MF is set to Off in the 4 tab you will not be able to fine tune the focus even if you press the shutter button. C O P Y

slide 95:

95 The camera automatically takes three shots in the following order: one at the manual focus position and one each with focus positions preset farther and nearer. The focus adjustment can be set in 3 levels. Choose . ● After pressing the m button press the op buttons to choose then press the qr buttons or turn the  dial to choose . Set the focus adjustment level. ● Press the l button. ● Press the qr buttons or turn the  dial. ● Pressing the r button will widen the interval and pressing the q button will narrow the interval. The camera will focus on the spot nearest the center where the focus is set. Shoot. ● Shoot in manual focus p. 94. Focus Bracketing Focus-BKT Mode • In flash settings other than p. 63 Focus Bracketing is not available. • Continuous shooting p. 81 cannot be used in this mode. C O P Y

slide 96:

96 When you wish to take several shots with the same exposure you can set the exposure and focus separately using the AE lock. AE stands for “Auto Exposure”. Lock the exposure. ● Point the camera toward the subject and press the ¤ button while pressing the shutter button halfway. When ¤ appears the exposure will be set. ● If you release your finger from the shutter button and press another button ¤ will disappear and the AE will unlock. Compose the scene and shoot. If you lock the exposure and then turn the  dial you can change the shutter speed and aperture value combination. Shooting with the AE Lock Program Shift C O P Y

slide 97:

97 Just as with the AE lock p. 96 you can lock the exposure for shooting with the flash. FE stands for “Flash Exposure”. Choose h p. 73. Lock the exposure. ● Point the camera toward the subject and press the ¤ button while pressing the shutter button halfway. The flash will fire and when ¤ appears the flash output will be retained. ● If you release your finger from the shutter button and press another button ¤ will disappear and the FE will unlock. Compose the scene and shoot. Shooting with the FE Lock C O P Y

slide 98:

98 The camera automatically changes the exposure while taking three continuous shots. The images are shot in the following order: standard exposure underexposure and overexposure. s Choose . ● After pressing the m button press the op buttons to choose then press the qr buttons or turn the  dial to choose . Set the exposure compensation amount. ● Press the l button. ● Press the qr buttons or turn the  dial to adjust the setting. ● From the exposure set by the camera you can adjust the amount of compensation ±2 stops in 1/3-stop increments. If exposure compensation p. 73 is already being used settings are made with the compensated value as the base. Auto Exposure Bracketing AEB Mode • In flash settings other than p. 63 AEB is not available. • Continuous shooting p. 81 cannot be used in this mode. C O P Y

slide 99:

99 The ND filter reduces light intensity to 1/8 3 stops of the actual level allowing for slower shutter speeds and smaller aperture values. Choose . ● After pressing the m button press the op buttons to choose . Set ND Filter to On. ● Press the qr buttons or turn the  dial to choose then press the m button. You can make the main subject such as people appear bright by having the camera provide the appropriate illumination with the flash. At the same time you can use a slow shutter speed to brighten the background that the light from the flash cannot reach. Choose …. ● After pressing the r button press the qr buttons or turn the  dial to choose … then press the m button. Once set … will appear on the screen. Shoot. ● Even if the flash fires ensure that the subject does not move until the shutter sound ends. Using the ND Filter Attach the camera to a tripod to prevent camera shake. Shooting with Slow Synchro Attach the camera to a tripod to prevent the camera from moving and blurring the image. It is recommended to set the IS Mode to Off when shooting with a tripod p. 155. C O P Y

slide 100:

100 You can set the shutter to the speed at which you want to shoot. The camera will set the appropriate aperture value for the shutter speed you set. M stands for “Time value”. Set the mode dial to M. Make the setting. ● Turn the  dial to set the shutter speed. Shoot. Available Shutter Speeds • 2" indicates 2 seconds 0"3 indicates 0.3 second and 1/160 indicates 1/160 second. • The fastest shutter speed when using the flash is 1/2000 second. Even if a speed faster than 1/2000 second is chosen the camera automatically sets the speed to 1/2000 second or lower. However if Safety FE is set to Off p. 105 the fastest speed is 1/500 second. • Depending on the zoom position some shutter speeds may not be available. If the aperture value displays in orange when the shutter button is pressed halfway the scene has exceeded the correct exposure limits. Adjust the shutter speed until the aperture value displays in white. Safety shift can also be used p. 101. Setting the Shutter Speed 15" 13" 10" 8" 6" 5" 4" 3"2 2"5 2" 1"6 1"3 1" 0"8 0"6 0"5 0"4 0"3 1/4 1/5 1/6 1/8 1/10 1/13 1/15 1/20 1/25 1/30 1/40 1/50 1/60 1/80 1/100 1/125 1/160 1/200 1/250 1/320 1/400 1/500 1/640 1/800 1/1000 1/1250 1/1600 1/2000 1/2500 1/3200 1/4000 What if aperture value is displayed in orange • When shutter speeds of 1.3 seconds or slower are used images are processed to eliminate noise after being taken. A certain amount of processing time may be needed before you can take the next shot. • It is recommended to set the IS Mode to Off when lowering the shutter speed and shooting with a tripod p. 155. C O P Y

slide 101:

101 You can set the aperture to a value at which you want to shoot. The camera will set the appropriate shutter speed for the aperture value you set. B stands for “Aperture value”. Set the mode dial to B. Make the setting. ● Turn the  dial to set the aperture value. Shoot. Available Aperture Values • The fastest shutter speed when using the flash is 1/2000 second. Even if a speed faster than 1/2000 second is chosen the camera automatically sets the speed to 1/2000 second or lower. However if Safety FE is set to Off p. 105 the fastest speed is 1/500 second. • Depending on the zoom position some aperture values may not be available. If the shutter speed displays in orange when the shutter button is pressed halfway the scene has exceeded the correct exposure limits. Adjust the aperture value until the shutter speed displays in white. Safety shift can also be used. With M and B modes if Safety Shift is set to On in the 4 tab the shutter speed or aperture value is automatically set for the correct exposure when it cannot otherwise be obtained. Safety Shift is disabled when the flash is enabled. Setting the Aperture Value F2.8 F3.2 F3.5 F4.0 F4.5 F5.0 F5.6 F6.3 F7.1 F8.0 What if shutter speed is displayed in orange Safety Shift C O P Y

slide 102:

102 You can manually set the shutter speed and aperture to shoot images. D stands for “Manual”. Set the mode dial to D. Make the setting. ● Press the button to choose the shutter speed or aperture value. ● Turn the  dial to set a value. The set exposure level appears on the indicator. You can check the difference against the standard exposure level. When the difference is more than ±2 stops the set exposure level appears in orange. When you press the shutter button halfway “–2” or “+2” appears in orange. Setting the Shutter Speed and Aperture Value Shutter Speed Aperture Value Exposure Level Indicator Standard Exposure Level Exposure Level • The standard exposure is calculated according to the metering method chosen p. 93. • If you use the zoom after making settings or change the composition the exposure level may change. • Depending on the shutter speed or aperture value set the monitor brightness may change. If the flash is set to h the monitor brightness will not change. • If you press the ¤ button the shutter speed or aperture value whichever was not chosen in Step 2 will automatically adjust to obtain the correct exposure. However the correct exposure may not be obtained depending on the settings. C O P Y

slide 103:

103 The camera can detect the brightness of areas in the scene such as faces or backgrounds. It can then keep highlights from blowing out in light areas only p. 78 and automatically adjust dark areas to the optimum brightness. Also when the overall image is lacking in contrast the camera will automatically correct the image for a sharper impression when shooting. Choose i-Contrast. ● Press the n button choose the 4 tab and then choose the i-Contrast menu item. Press the qr buttons to choose Auto. will appear on the screen. Correcting the Brightness and Shooting i-Contrast Under some conditions the image may appear coarse or may not be corrected properly. You can correct recorded images p. 141. C O P Y

slide 104:

104 You can automatically correct red-eye that occurs in images taken with the flash. Choose Flash Control. ● Press the n button choose Flash Control from the 4 tab and press the m button. Adjust the setting. ● Press the op buttons or turn the  dial to choose Red-Eye Corr. and press the qr buttons to choose On. Œ will appear on the screen. Red-Eye Correction Red-eye correction may be applied to red areas other than red eyes. For example when red make-up has been used around eyes. • You can correct recorded images p. 142. • To display the screen in Step 2 from the shooting screen press the r button then the n button. Alternatively you can press and hold the r button. C O P Y

slide 105:

105 Just like with exposure compensation p. 73 you can adjust the exposure ±2 stops in 1/3-stop increments when using the flash. Choose . ● After pressing the m button press the op buttons to choose . Make the setting. ● Press the qr buttons or turn the  dial to choose the flash exposure compensation then press the m button. will appear on the screen. The camera automatically changes the shutter speed or aperture value when the flash fires to avoid overexposing and blowing out the highlights in the scene. In the 4 tab if Safety FE in Flash Control is set to Off the shutter speed and aperture value will not automatically adjust. Adjusting the Flash Exposure Compensation You can also set the flash exposure compensation by pressing the n button choosing Flash Control from the 4 tab and then pressing the m button. Choose Flash Exp. Comp and use the qr buttons to make the setting. Alternatively you can press the r button then the n button. Or you can press and hold the r button. Safety FE C O P Y

slide 106:

106 In D mode you can choose 3 levels of flash output. Set the camera to D mode. Choose the flash output. ● After pressing the m button press the op buttons to choose . Make the setting. ● Press the qr buttons or turn the  dial to choose the flash output then press the m button. Adjusting the Flash Output • You can also set the flash output by pressing the n button choosing Flash Control from the 4 tab and then pressing the m button. Choose Flash Output and use the qr buttons to make the setting. Alternatively you can press the r button then the n button. Or you can press and hold the r button. • In M and B modes you can set the flash output if you choose the 4 tab then Flash Control and set the Flash Mode option to Manual. C O P Y

slide 107:

107 When the camera detects the possibility that people have their eyes shut appears. Choose Blink Detection. ● Press the n button choose the 4 tab and then choose the Blink Detection menu item. Press the qr buttons to choose On. Shoot. When a person with shut eyes is detected a frame and appear. Checking for Shut Eyes • In " and modes this function is only available for the last image shot. • Not available in W or . C O P Y

slide 108:

108 You can register commonly used shooting modes and settings. By simply turning the mode dial to or you can switch to your registered settings. Even if you switch shooting modes or turn off the power settings that usually cancel self timer etc. will be saved. Settings that Can be Registered • Shooting modes G M B or D • Items set in G M B or D pp. 73 – 102 • Items in the shooting menu • Zoom position • Manual focus position p. 94 • My Menu items p. 157 Enter the Shooting mode you want to register and make the settings. Choose Save Settings. ● Press the n button choose Save Settings from the 4 tab and press the m button. Register the settings. ● Press the qr buttons or turn the  dial to choose the destination then press the m button. Registering Shooting Settings • To change part of an already registered setting except for Shooting modes choose or make the changes then register the setting again. These settings will not be reflected in other Shooting modes. • To return contents registered to or to the default settings turn the mode dial to or and choose Reset All p. 52. C O P Y

slide 109:

109 You can change the look of an image when shooting. However the shooting conditions may cause the image to become coarse or the colors may not come out as expected. T Color Accent You can choose to retain a single color and change the rest to black and white in a composition. Choose T. ● Follow Step 1 on p. 56 to choose T. Press the l button. The unchanged image and the Color Accent image will both display. ● The color for default settings is green. Specify the color. ● Position the center frame so it is filled with the color you want and press the q button. The specified color will be recorded. Specify the range of colors. ● Press the op buttons or turn the  dial to change the range of colors to be retained. ● Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors. ● Pressing the l button accepts the setting and restores the shooting screen. Changing the Color and Shooting Recorded color Using the flash may cause unexpected results in this mode. C O P Y

slide 110:

Changing the Color and Shooting 110 Y Color Swap You can swap one color in an image for another when recording it. You can only swap one color. Choose Y. ● Follow Step 1 on p. 56 to choose Y. Press the l button. The unchanged image and the Color Swap image will both display. ● The default setting is to change green to gray. Specify the color to be swapped. ● Position the center frame so it is filled with the color you want and press the q button. The specified color will be recorded. Specify the target color. ● Position the center frame so it is filled with the color you want and press the r button. The specified color will be recorded. C O P Y

slide 111:

Changing the Color and Shooting 111 Specify the range of colors to be swapped. ● Press the op buttons or turn the  dial to adjust the range of colors affected. ● Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors. ● Pressing the l button accepts the setting and restores the shooting screen. • Using the flash may cause unexpected results in this mode. • Under some conditions the image may appear coarse. C O P Y

slide 112:

112 Large subjects can be split into several shots that can later be merged together using the included software on a computer to create a panoramic image. Set the mode dial to K. Choose a x or v. ● Follow Step 1 on p. 56 to choose x or v. Take the first shot. The exposure and white balance will be set with the first shot. Take subsequent shots. ● Overlap part of the first shot when taking the second shot. ● Minor discrepancies in the overlapping portions will be corrected when the images are merged. ● Up to 26 shots can be recorded with the same procedures. Finish shooting. ● Press the m button. Merge the images on a computer. ● For details on how to merge the images refer to the Software Guide. Shooting Stitch Assist Images • This function is not available when a TV is used as the monitor p. 86. • To use AF lock register to the button p. 156. C O P Y

slide 113:

113 Using Various Functions for Shooting Movies This chapter provides more advanced information than the “Shooting Movies” and “Viewing Movies” sections of Chapter 1. • This chapter assumes that the mode dial is set to E. 6 C O P Y

slide 114:

114 You can choose between three Movie modes. Set the mode dial to E. Choose a Movie mode. ● Turn the  dial to choose a Shooting mode. Changing the Movie Mode E Standard Normal mode. Color Accent These Shooting modes let you change all colors except the chosen color to black and white or exchange the chosen color for another color when shooting. See “Changing the Color and Shooting” p. 109 for details. z Color Swap Under some conditions colors may not turn out as expected in the and z mode. C O P Y

slide 115:

115 You can choose between two image quality settings. Choose the image quality. ● After pressing the m button press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the  dial to choose an option and press the m button. The setting will display on the screen. Image Quality Table Estimated Shooting Time Changing the Image Quality Image Quality Recording Pixels/Frame Rate Content 640 x 480 pixels 30 frames/sec. For shooting standard quality movies. 320 x 240 pixels 30 frames/sec. Since the number of recording pixels is smaller the image quality will be lower than with but you can record three times the length. Image Quality Shooting Time 2GB 8GB 22min. 45sec. 1hr. 4min. 1sec. 1 hr. 30 min. 57 sec. 4 hrs. 15 min. 51 sec. • Based on Canon’s testing standards. • Recording will automatically stop when either the clip file size reaches 4 GB or the recording time reaches approximately 1 hour. • On some memory cards recording may stop even if the maximum clip length has not been reached. SD Speed Class 4 or higher memory cards are recommended. C O P Y

slide 116:

116 Wind Filter suppresses noise when the wind is strong. However unnatural sound may result when used to record in locations with no wind. ● Press the n buttons to choose Wind Filter from the 4 tab then press the qr buttons to choose On. You can set the exposure or change it in 1/3 steps within a range of ±2 before shooting. Focus. ● Press the shutter button halfway to focus. Lock the exposure. ● Press the ¤ button to lock the exposure. The exposure shift bar appears. ● Press the ¤ button again to release the lock. Change the exposure. ● While watching the screen turn the  dial to adjust the brightness. Shoot. Using the Wind Filter AE Lock/Exposure Shift C O P Y

slide 117:

117 The following functions can be used in the same way as for still images. Functions marked with a can be used in the same way as for still images when in T or Y. When shooting with the AF Lock you can register to the button to easily call it up for use p. 156. • Zooming in More Closely On Subjects The digital zoom p. 64 is available. • Using the Self-Timer p. 67 • Shooting Close-ups Macro p. 77 • Adjusting the White Balance p. 79 • Changing the Tone of an Image My Colors p. 82 • Shooting Using the Two Second Self-Timer p. 83 • Shooting Using a TV Monitor p. 86 • Shooting in Manual Focus Mode p. 94 • Shooting with the AE Lock p. 96 • Using the ND Filter p. 99 • Turning off the AF Assist Beam p. 152 • Customizing Display Information p. 154 • Changing the IS-Mode Settings p. 155 You can switch between Continuous and Off. • Registering Functions to the Button p. 156 Other Shooting Functions C O P Y

slide 118:

118 The following functions can be used in the same way as for still images. • Erasing Images p. 29 • Quickly Searching Images p. 122 • Viewing Images in Filtered Playback p. 123 • Viewing Slideshows p. 125 • Changing Image Transitions p. 127 • Viewing Images on a TV p. 128 • Protecting Images p. 130 • Erasing All Images p. 133 • Organizing Images by Category My Category p. 135 • Rotating Images p. 137 Summary for “Viewing Movies” p. 33 Exit Playback Slow Motion Playback you can use the qr buttons to adjust the speed. Sound will not play back. Display the first frame Previous frame Rewind if you hold down the m button. Next frame Fast forward if you hold down the m button. Display the last frame Edit p. 119 Appears when connected to a PictBridge compliant printer p. 30. Refer to the Personal Printing Guide for details. Playback Functions C O P Y

slide 119:

119 You can trim the beginnings and ends of recorded movies in one-second increments. Choose . ● Follow Steps 1 and 3 on p. 33 choose and press the m button. The movie editing panel and the movie editing bar will appear. Set the editing range. ● Press the op buttons and choose or . ● Press the qr buttons or turn the  dial to move . will display at each one- second interval. If you choose you can trim the beginning of the movie from . If you choose you can trim the end of the movie from . Even if you move to a point other than a point only the portion from the nearest to the left will be trimmed when is chosen. Only the portion from the nearest to the right will be trimmed when is chosen. The section indicated with will be the section of the movie that remains after editing. Editing Movie Editing Bar Movie Editing Panel C O P Y

slide 120:

Editing 120 Check the edited movie. ● Press the op buttons to choose Play then press the m button. The edited movie will play. ● To edit the movie again repeat Step 2. ● To cancel editing press the op buttons and choose . After pressing the m button press the qr buttons or turn the  dial to choose OK and press the m button again. Save the edited movie. ● Press the op buttons to choose then press the m button. ● Press the qr buttons or turn the  dial to choose New File then press the m button. The movie will be saved as a new file. • When Overwrite is chosen in Step 4 the unedited movie is overwritten with the edited movie erasing the original movie. • When there is not enough space left on the memory card only Overwrite can be chosen. • If the battery is depleted partway through editing the edited movie clips may not be saved. When editing movies you should use a fully charged battery or the separately sold AC adapter kit p. 40. C O P Y

slide 121:

121 Using Playback and Other Functions The first part of this chapter explains various ways to play back and edit images. The latter part explains how to specify images for printing. • Press the 1 button to enter Playback mode before operating the camera. 7 • It may not be possible to play back or edit images that have been edited on a computer had their file name changed or have been taken on a different camera. • The edit function pp. 138 – 142 cannot be used if the memory card does not have free space available. C O P Y

slide 122:

122 g Searching Images Using Index Display Displaying multiple images at a time lets you quickly find the image you want. Move the zoom lever toward g. Images will display in an index. ● Move the zoom lever toward g to increase the number of images. The number of images increases each time you move the lever. ● Move the zoom lever toward k to reduce the number of images. The number of images will reduce each time you move the lever. Change the displayed images. ● Turn the  dial to switch to the next set of images set in Step 1. Choose an image. ● Press the opqr buttons to choose an image. ● An orange frame appears on the chosen image. ● Press the m button to display the chosen image by itself. Searching Images Using the Control Dial Turn the control dial to quickly search images. You can also jump by the shooting date Scroll Display. Choose an image. ● If you set single image playback and turn the  dial quickly the images will display as shown on the left. ● If you press the op buttons you can search images by the shooting date. ● Pressing the m button restores single image playback. Quickly Searching Images C O P Y

slide 123:

Viewing Images in Filtered Playback 123 When there are many images on the memory card you can filter and display them by a specified filter. You can also protect p. 130 or delete p. 133 all images at once while filtered. Search by and Choose a target filter. ● In single image playback press the d button then press the op buttons to choose a jump method. ●In or press the qr buttons to choose a filter. Turning the  dial will display only images that have the same shooting date category as the currently chosen image. ● Press the l button to switch between Information Display and No Information Display. ● Pressing the n button restores the single image display. To turn off this function press the n button choose the 1 tab and Scroll Display then choose Off. Jump Shot Date Displays the images shot on a specified date. Jump to My Category Displays the images of a specified category p. 135. Jump to first Jumps to still images only. Jump to Movie Jumps to a movie. Jump 10 Images Jumps over 10 images at a time. Jump 100 Images Jumps over 100 images at a time. Viewing Images in Filtered Playback Target Filters C O P Y

slide 124:

Viewing Images in Filtered Playback 124 Viewing images using filtered playback. ● Pressing the m button will start filtered playback and the jump method and a yellow frame will appear. ● If you press the qr buttons or turn the  dial the chosen target images will display. ● Pressing the d button displays Filtered playback settings cleared. Pressing the m button cancels filtered playback. Jump by and Images ● In single image playback press the d button then press the op buttons to choose a jump method. ● If you press the qr buttons the display will advance to the image that is the chosen number of images away. ● Pressing the n button restores the single image display. When you choose in Step 1 on p. 123 if there are only images with the same date you can only choose one filter. Also you can only choose if there are no images sorted into categories in . In filtered playback Step 2 you can view filtered images with “g Searching Images Using Index Display” p. 122 “Viewing Slideshows” p. 125 and “Magnifying Images” p. 127. You can process all filtered images at once while performing operations in “Protecting Images” p. 130 “Erasing All Images” p. 133 or “Printing from the Print List DPOF” p. 143 by choosing All Filtered Images. However if you change the category p. 135 or edit an image and save it as a new image p. 138 a message will appear and filtered playback will cancel. What if you can’t choose a filter Filtered playback C O P Y

slide 125:

125 You can automatically play back images recorded to a memory card. Choose Slideshow. ● Press the n button choose Slideshow from the 1 tab and press the m button. Make the setting. ● Press the op buttons or turn the  dial to choose an item and press the qr buttons to adjust the setting. Choose Start. ● Press the op buttons or turn the  dial to choose Start the press the m button. The slideshow will start a few seconds after Loading image… displays. ● You can pause/restart a slideshow by pressing the m button again. Viewing Slideshows Repeat Repeats playback of images Play Time Display time for each image Effect Transition effects when switching between images • If you press the qr buttons or turn the  dial during playback the image will switch. If you keep the qr buttons pressed you can fast- forward through images. • The power saving function does not work during slideshows p. 54. • You cannot change Play Time if Bubble is chosen in Effect. C O P Y

slide 126:

126 You can magnify the area of a recorded image that was inside the AF Frame or the area of a face that was detected to check the focus. Press the l button and switch to the focus check display p. 46. A white frame will appear where the AF frame or face was when the focus was set. A gray frame will appear on a face detected during playback. The area within the orange frame appears magnified. Switch frames. ● Move the zoom lever toward k once. The screen at the left will appear. ● Press the m button to move to a different frame when multiple frames appear. Change the magnification level or location. ● Use the zoom lever to change the display size and the opqr buttons to change the display position while checking the focus. ● Pressing the n button resets the display to Step 1. Checking the Focus C O P Y

slide 127:

127 Move the zoom lever toward k. ● The display will zoom in on the image and if you continue to hold the zoom lever it will continue to zoom in up to a factor of 10x. ● If you press the opqr buttons you can move the location of the displayed area. ● Move the zoom lever toward g to zoom out or return to Single Image Playback. ● If you turn the  dial you can switch images in the zoomed state. You can choose from three transition effects when switching between images in single image playback. Choose Transition. ● Press the n button and choose the 1 tab then choose Transition and press the qr buttons to choose a transition effect. Magnifying Images Approximate Location of Displayed Area Changing Image Transitions C O P Y

slide 128:

128 Using the supplied AV cable you can connect the camera to a TV to view images you have shot. Items to Prepare • Camera and TV • AV cable supplied with the camera p. 2 Turn off the camera and TV. Connect the camera to the TV. ● Open the camera’s terminal cover and fully insert the plug of the cable into the camera’s terminal. ● Insert the cable plug fully into the video input terminals as shown in the illustration. Turn on the TV and switch it to the input to which the cable is connected. Turn on the camera. ● Press the 1 button to turn on the camera. The image will appear on the TV nothing will appear on the monitor of the camera. ● After you finish viewing turn off the camera and TV and unplug the cable. Images will not display correctly if the camera’s video output setting NTSC/PAL does not match the TV system. Press the n button choose the 3 tab and Video System to switch to the correct video system. Viewing Images on a TV Yellow Yellow Black White or Black What if the images don’t properly display on the TV C O P Y

slide 129:

129 Use the separately sold HDMI Cable HTC-100 to connect the camera to a high-definition TV for enhanced viewing experience. Turn off the camera and TV. Connect the camera to the TV. ● Open the cover and fully insert the cable plug into the camera’s HDMI terminal. ● Fully insert the cable plug into the TV’s HDMI terminal. ● Follow Steps 3 and 4 on p. 128 to display the images. Viewing Images on a High-Definition TV The Remote Switch RS60-E3 and the HDMI cable HTC-100 cannot be plugged into the camera simultaneously. Attempting to forcibly insert both cables could result in equipment damage. Operation sounds will not play when connected to a high-definition TV. C O P Y

slide 130:

130 You can protect important images so that they cannot be erased by the camera pp. 29 133. Choose Protect. ● Press the n button choose the 1 tab and Protect and then press the m button. Choose a selection method. ● Press the op buttons or turn the  dial to choose a selection method and press the m button. ● Pressing the n button will restore the menu screen. Choosing Images Individually Choose Select. ● Follow Step 2 above to choose Select and press the m button. Choose images. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Once set will appear on the screen. ● Pressing the m button once more will cancel the selection and will disappear. ● To choose multiple images repeat the above operation. Protecting Images If you format the memory card pp. 23 53 protected images will also be erased. Protected images cannot be erased with the camera’s erase function. To erase an image cancel protection first. C O P Y

slide 131:

Protecting Images 131 Select Range Choose Select Range. ● Follow Step 2 on p. 130 to choose Select Range and press the m button. Choose the starting image. ● Press the m button. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Choose the ending image. ● Press the r button choose Last image and press the m button. ● Press the qr buttons or turn the  dial to choose an image and press the m button. ● You cannot choose images before the first image. C O P Y

slide 132:

Protecting Images 132 Protect images. ● Press the p button choose Protect and press the m button. You can also choose the first or last image by turning the  dial when the upper screen in Steps 2 and 3 is displayed. Choose All Images Choose All Images. ● Follow Step 2 on p. 130 to choose All Images and press the m button. Protect images. ● Press the op buttons or turn the  dial to choose Protect and press the m button. Choose images with the  dial You can unlock groups of protected images if you choose Unlock in Step 4 while in Select Range or Step 2 while in All Images. C O P Y

slide 133:

133 You can choose images and erase them in groups. Since erased images cannot be recovered exercise adequate caution before erasing. Protected images p. 130 cannot be erased. Choose Erase. ● Press the n button choose the 1 tab and Erase and press the m button. Choose a selection method. ● Press the op buttons or turn the  dial to choose a selection method and press the m button. ● Pressing the n button will restore the menu screen. Choosing Images Individually Choose Select. ● Follow Step 2 above to choose Select and press the m button. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Once set will appear on the screen. ● Pressing the m button once more will cancel the selection and will disappear. ● To choose multiple images repeat the above operation. Erasing All Images C O P Y

slide 134:

Erasing All Images 134 Press the n button. Erase. ● Press the qr buttons or turn the  dial to choose OK and press the m button. Select Range Choose Select Range. ● Follow Step 2 on p. 133 to choose Select Range and press the m button. ● Follow Steps 2 and 3 on p. 131 to choose images. Erase. ● Press the p button to choose Erase then press the m button. Choose All Images Choose All Images. ● Follow Step 2 on p. 133 to choose All Images and press the m button. Erase. ● Press the qr buttons or turn the  dial to choose OK and press the m button. C O P Y

slide 135:

135 You can organize images in categories. You can display the images in a category in Filtered Playback p. 123 and process all images at once by using the functions below. • Viewing Slideshows p. 125 Protecting Images p. 130 Erasing All Images p. 133 Choosing Images for Printing DPOF p. 144 Choose My Category. ● Press the n button and choose the 1 tab then choose My Category and press the m button. Make the setting. ● Press the op buttons or turn the  dial to choose a category and press the m button. ● Press the n button to return to the menu screen. Images are automatically categorized by shooting condition as they are shot. : Images with faces detected or images shot as I F V. : Images detected as or in A mode or images shot in U O or J. : Images shot in ’ t w S y P. Organizing Images by Category My Category C O P Y

slide 136:

Organizing Images by Category My Category 136 Choosing Images Individually Choose Select. ● Follow Step 2 above to choose Select and press the m button. ● Press the qr buttons or turn the  dial to choose the image and press the m button. ● Press the op buttons choose a category and press the m button. Once set will appear on the screen. ● Pressing the m button again deselects the category and disappears. ● To choose multiple images repeat the above operation. Select Range Choose Select Range. ● Follow Step 2 on p. 135 to choose Select Range and press the m button. ● Follow Steps 2 and 3 on p. 131 to choose images. ● Press the p button choose the item and press the qr buttons or turn the  dial to choose a type. Choose the setting. ● Press the p button to choose Select and press the m button. If you choose Deselect in Step 2 you can deselect all of the images in the Select Range category. C O P Y

slide 137:

137 You can change the orientation of an image and save it. Choose Rotate. ● Press the n button choose the 1 tab and Rotate and press the m button. Rotate the image. ● Press the qr buttons or turn the  dial to choose an image. ● The image will rotate 90° with each press of the m button. ● Pressing the n button will restore the menu screen. Rotating Images C O P Y

slide 138:

138 You can resize images to a lower pixel setting and save the resized image as a separate file. Choose Resize. ● Press the n button and choose the 1 tab then choose Resize and press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Choose an image size. ● Press the qr buttons or turn the  dial to choose an option then press the m button. The Save new image screen will appear. Save the new image. ● Press the qr buttons or turn the  dial to choose OK and press the m button. The image will be saved as a new file. Display the new image. ● When you press the n button the Display new image screen will appear. ● Press the qr buttons or turn the  dial to choose Yes and press the m button. The saved image will display. Resizing Images • You cannot resize an image to a larger size. • You cannot resize images taken with the or settings. C O P Y

slide 139:

139 You can cut out a portion of a recorded image and save it as a new image file. Choose Trimming. ● Press the n button choose the 1 tab and Trimming then press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Adjust the trimming area. A frame will appear around the portion of the image to be trimmed. The original image will display in the upper left and the trimmed image will display in the lower right. ● If you move the zoom lever to the left or right you can change the frame size. ● If you press the opqr buttons you can move the frame. ● If you press the l button you can change the frame size. ● In an image with detected faces gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by turning the  dial. ● Press the m button. Save as a new image and display. ● Perform Steps 4 and 5 on p. 138. Trimming Recorded pixels after trimming Trimming Area Trimming Area Display • and images cannot be trimmed. • The width and height ratio of an image that can be changed is fixed at 4:3 for a vertical image 3:4. • The number of recorded pixels in a trimmed image will be smaller than before trimming. C O P Y

slide 140:

140 You can change the color of an image and save it as a separate image. Refer to p. 82 for details on each menu item. Choose My Colors. ● Press the n button choose the 1 tab and My Colors and press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Choose a menu option. ● Press the qr buttons or turn the  dial to choose an option. ● After choosing the menu option you can magnify the image by following the operations in “Magnifying Images” p. 127. ● If you press the m button during magnified display you can switch to the original image. Pressing the n button restores the menu screen. ● Press the m button. Save as a new image and display. ● Perform Steps 4 and 5 on p. 138. Adding Effects with the My Colors Function • If you repeatedly change the color of an image the quality will gradually deteriorate and you may not achieve the expected color. • The coloration of images changed with this function may vary from those recorded with the My Colors function p. 82. • My Colors settings cannot be performed on images. C O P Y

slide 141:

141 The camera can detect areas in an image such as faces or backgrounds that are too dark and automatically adjust them to the optimum brightness. Also when the overall image is lacking in contrast the camera will automatically correct the image for a sharper impression. You can choose 4 levels of correction: Auto Low Medium or High. Corrected images will be saved as a new file. Choose i-Contrast. ● Press the n button choose the 1 tab and i-Contrast then press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose the image and press the m button. Choose a menu item. ● Press the qr buttons or turn the  dial to choose an option then press the m button. Save as a new image and display. ● Perform Steps 4 and 5 on p. 138. Choose Low Medium or High and adjust the image. Correcting the Contrast i-Contrast What if the image wasn’t corrected by the Auto option as well as you would like • Under some conditions the image may appear coarse or the exposure setting may not be suitable. • Repeatedly adjusting the same image may cause the quality to deteriorate. • Contrast correction cannot be performed on images. C O P Y

slide 142:

142 You can automatically correct red eyes in images and save them as new files. Choose Red-Eye Correction. ● Press the n button choose the 1 tab and Red-Eye Correction then press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose an image. Correct the image. ● Press the m button. Red-eye detected by the camera will be corrected and a frame will appear around the corrected portion. ● You can zoom the image using the procedures in “Magnifying Images” p. 127. Save as a new image and display. ● Press the opqr buttons or turn the  dial to choose New File and press the m button. The image will be saved as a new file. ● Perform Step 5 on p. 138. Correcting the Red-Eye Effect • Some images may not be properly corrected. • When Overwrite in Step 4 is chosen the uncorrected image is overwritten with the corrected data erasing the original image. • Protected images cannot be overwritten. • Red-eye correction cannot be performed on images. • When shooting in + recording pixels red-eye correction can be performed on the JPEG image but the original image cannot be overwritten. C O P Y

slide 143:

143 You can add images to the print list DPOF directly after shooting or while in playback by pressing the c button. You can print from a print list simply by connecting your camera and printer. These selection methods comply with the DPOF Digital Print Order Format standards. Easily Add Images to the Print List Choose an image. ● Press the qr buttons or turn the  dial and choose the image. Press the c button RAW images and videos will be excluded. Print list. ● Press the op buttons and choose the number of prints press the qr buttons or turn the  dial to choose Add and press the m button. ● To cancel adding images choose the added images and press the c button then press the qr buttons or turn the  dial to choose Remove and press the m button. Print Added Images The following examples use the Canon SELPHY series printers. Please also refer to the Personal Printing Guide. Connect the camera to the printer p. 30. Print. ● Press the op buttons choose Print now and press the m button. Printing will start. ● If you stop the printer during printing and start again it will start from the next print. Printing from the Print List DPOF Number of copies to print C O P Y

slide 144:

144 You can choose up to 998 images on a memory card for printing and specify settings such as the number of print copies so that they can be printed together or processed at a photo developer service. These selection methods comply with the DPOF Digital Print Order Format standards. Print Settings You can set the print type date and file number. These settings apply to all images chosen for printing. Choose Print Settings. ● Press the n button and choose the 2 tab then choose Print Settings and press the m button. Adjust the settings. ● Press the op buttons or turn the  dial to choose a menu item then press the qr buttons to choose an option. Pressing the n button accepts the settings and restores the menu screen. Choosing Images for Printing DPOF Print Type Standard Prints one image per page. Index Prints several reduced size images per page. Both Prints both standard and index formats. Date On Prints the date from the shooting information. Off – File No. On Prints the file number. Off – Clear DPOF data On Removes all print settings after printing. Off – • Some printers or photo developer services may not be able to reflect all of the print settings in the output. • may appear when using a memory card with print settings set by a different camera. These settings will be overwritten with those set by your camera. • Images with the date embedded always print with the date regardless of the Date setting. As a result some printers may print the date twice on these images if Date is also set to On. C O P Y

slide 145:

Choosing Images for Printing DPOF 145 Choosing the Number of Copies Choose Select Images Qty.. ● Press the n button and choose the 2 tab then choose Select Images Qty. and press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose an image then press the m button. You will be able to set the number of print copies. ● If you choose Index appears on the screen. Press the m button again to deselect the images. will disappear. Set the number of prints. ● Press the op buttons or turn the  dial to set the number of prints maximum 99. ● Repeat Steps 2 and 3 to choose other images and the number of prints for each. ● You cannot set the number of print copies for index prints. You can only choose which images to print. ● Pressing the n button accepts the settings and restores the menu screen. • With Index chosen the Date and File No. options cannot be set to On at the same time. • The date will be printed in the style set in the Date/Time function in the 3 tab p. 20. • images and videos cannot be set for printing. C O P Y

slide 146:

Choosing Images for Printing DPOF 146 Choose Range Choose Select Range. ● Choose Select Range in Step 1 on p. 145 and press the m button. ● Choose images according to Steps 3 and 4 on p. 131. Make print settings. ● Press the op buttons choose Order and press the m button. Set All Images to Print Once Choose Select All Images. ● Choose Select All Images from the screen in Step 1 on p. 145 and press the m button. Make print settings. ● Press the qr buttons or turn the  dial to choose OK and press the m button. Clearing All Selections Choose Clear All Selections. ● Choose Clear All Selections in Step 1 on p. 145 and press the m button. All selections will be cleared. ● Press the qr buttons or turn the  dial to choose OK then press the m button. C O P Y

slide 147:

147 Customizing the Camera You can customize various functions to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes. 8 C O P Y

slide 148:

148 You can customize convenient and commonly used functions from the 3 tab p. 49. Turning off Hints Tips When you choose an item in the FUNC. menu p. 48 or Menu p. 49 hints and tips display. You can turn off this function. ● Choose Hints Tips then press the qr buttons to choose Off. Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken from 0001 – 9999 and saved to folders of up to 2000 images. You can change the file number assignment. ● Choose File Numbering then press the qr buttons to choose an option. Changing Functions Continuous Even if you shoot using a new memory card the file numbers are assigned consecutively until an image with the number 9999 is taken/saved. Auto Reset If you replace the memory card with a new one file numbering begins with 0001 again. • If you use a memory card already containing images the newly assigned file numbers may continue the existing numbering for both the Continuous and Auto Reset settings. If you want to start over with file number 0001 format the memory card before use p. 53. • Refer to the Software Guide for information regarding folder structure or image types. C O P Y

slide 149:

Changing Functions 149 Creating Folders by Shooting Date Images are saved into folders created each month however you can also create folders by shooting date. ● Choose Create Folder and press the qr buttons to choose Daily. ● Images will be saved into folders created on each shooting date. Changing the Lens Retract Time For safety reasons the lens retracts about 1 minute after pressing the 1 button when in a Shooting mode p. 28. You can set the retraction time to 0 sec.. ● Choose Lens Retract then press the qr buttons to choose 0 sec.. Turning off the Power Saving Function You can set the power saving function p. 54 to Off. Setting it to On is recommended to save battery power. ● Choose Power Saving then press the m button. ● Press the op buttons or turn the  dial to choose Auto Power Down then press the qr buttons to choose Off. ● If you set the power saving function to Off be careful not to forget to turn off the camera after use. C O P Y

slide 150:

Changing Functions 150 Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically p. 54. This also works when Auto Power Down is set to Off. ● Choose Power Saving then press the m button. ● Press the op buttons or turn the  dial to choose Display Off then press the qr buttons to choose a time. ● In order to save battery power it is recommended to choose less than 1 min.. Using the World Clock When traveling abroad you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/ Time settings. Set the home time zone. ● Choose Time Zone and press the m button. ● When setting this for the first time check the information that displays on the screen at the left and press the m button. ● Press the qr buttons or turn the  dial to choose the home time zone then press the m button. To set daylight saving time adds 1 hour press the op buttons to choose . C O P Y

slide 151:

Changing Functions 151 Set the world time zone. ● Press the op buttons or turn the  dial to choose then press the m button. ● Press the qr buttons or turn the  dial to choose the destination time zone then press the m button. ● You can also set the daylight saving time as in Step 1. Choose the world time zone. ● Press the op buttons or turn the  dial to choose Home/World. ● Press the qr buttons to choose then press the n button. will appear in the Time Zone or shooting screen p. 44. Changing Distance Units You can change the distance units that display in the zoom bar p. 25 and the MF indicator p. 94 from m/cm to ft/in. ● Choose Distance Units then press the qr buttons to choose ft/in. If you change the date or time in the setting p. 20 your time and date will automatically change. C O P Y

slide 152:

152 If you set the mode dial to G you can change the settings in the 4 tab p. 49. Switching the Focus Setting The camera focuses on whatever it is aimed at even when the shutter button is not pressed. However you can set it so that the camera only focuses when the shutter button is pressed halfway. ● Choose Continuous AF then press the qr buttons to choose Off. Turning off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp. ● Choose AF-assist Beam then press the qr buttons to choose Off. Before attempting to shoot using a function explained in this chapter in modes other than G mode check if the function is available in those modes pp. 180 – 183. Changing Shooting Functions On The camera focuses continuously until you press the shutter button halfway allowing you to shoot without missing opportunities. Off This conserves battery power. C O P Y

slide 153:

Changing Shooting Functions 153 Changing the Flash Timing You can change the timing for the flash and shutter. ● Choose Flash Control and press the m button. ● Press the op buttons or turn the  dial to choose Shutter Sync. and press the qr buttons to choose a setting. Turning off the Red-Eye Reduction Function The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function. ● Choose Flash Control then press the m button. ● Press the op buttons or turn the  dial to choose Red-Eye Lamp then press the qr buttons to choose Off. Changing the Image Display Time You can change the length of time the images display directly after shooting. ● Choose Review then press the qr buttons to choose an option. 1st-curtain The flash fires right after the shutter opens. 2nd-curtain The flash fires right before the shutter closes. 2 – 10 sec. Displays images for the set time. Hold The image displays until you press the shutter button halfway. Off No image displays. C O P Y

slide 154:

Changing Shooting Functions 154 Changing the Way the Image Displays Right After Shooting You can change the way the image displays after shooting. ● Choose Review Info then press the qr buttons to choose an option. Customizing Display Information You can change which information is displayed by switching between custom displays with each press of the l button. ● Choose Custom Display then press the m button. ● Press the opqr buttons or turn the  dial to select an item and press the m button. A mark will appear on items that will display. ● Press the opqr buttons or turn the  dial to choose or and press the m button to set the custom displays that appear when the l button is pressed. Custom displays marked with a will not appear when the l button is pressed. The custom display currently being used cannot be marked with a . Off Displays the image only. Detailed Displays detailed information p. 45. Focus Check The area inside the AF frame is magnified allowing you to check the focus. The procedure is the same as in “Checking the Focus” p. 126. C O P Y

slide 155:

Changing Shooting Functions 155 Items with a will display. Changing the IS-Mode Settings ● Choose IS Mode then press the qr buttons to choose an option. Shooting Info Displays shooting information p. 44. Grid Lines A grid overlays the display. 3:2 Guide The areas outside the 3:2 range are grayed out. This area will not print when printing on paper with a 3:2 aspect ratio. Histogram Histogram displays in shooting modes G M B D p. 46. If you press the shutter button halfway and return to the shooting screen from the custom display settings screen the settings will not be saved. Gray items can also be set however they may not display depending on the Shooting mode. Continuous Image stabilization is always on. You can confirm the result directly on the display which makes it easier to check the composition or focus. Shoot Only Image stabilization is only active at the moment of shooting. Panning Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally. • If camera shake is too strong attach the camera to a tripod. It is recommended to set the IS Mode to Off when the camera is attached to a tripod. • When using Panning hold the camera horizontally. Image stabilization does not work when the camera is held vertically. C O P Y

slide 156:

Changing Shooting Functions 156 Registering Functions to the Button ● Choose Set Shortcut button then press the m button. ● Press the opqr buttons or turn the  dial to choose the functions to register then press the m button. ● Pressing the button will call up the registered function. • Choose if you want to cancel registration. • When this symbol is shown on the bottom right of an icon the function cannot be used in the current Shooting mode or function setting. • In and each press of the button records white balance data p. 79 and the white balance settings change to or respectively. • In each press of the button will adjust the focus and will appear on the screen. • If you press the button in the screen will turn off. Perform one of the following operations to solve the problem. • Press any button other than the power button • Change the camera’s vertical or horizontal orientation • Open and close the LCD monitor C O P Y

slide 157:

157 You can register shooting menu items in the tab to fit your preferences. You can quickly access commonly used menu items from a single screen by registering them in My Menu. Choose My Menu settings. ● Choose My Menu settings in the tab then press the m button. Choose the menu items to register. ● Press the op buttons to choose Select items then press the m button. ● Press the op buttons to choose a menu to register up to 5 and press the m button. will appear. ● To cancel registration press the m button and the will disappear. ● Press the n button. Change the order in which menu items are displayed. ● Press the op buttons to choose Sort then press the m button. ● Press the op buttons to choose the menu item you would like to move and press the m button. ● Press the op buttons to change the order then press the m button. ● Press the n button. Registering Commonly Used Shooting Menus C O P Y

slide 158:

Changing Playback Functions 158 You can adjust the settings in the 1 tab by pressing the 1 button p. 49. Choosing the Image that First Displays in Playback ● Choose Resume then press the qr buttons to choose an option. • Gray items in Step 2 can also be set however they may not be available depending on the Shooting mode. • Choose Set default view and press the qr buttons to choose Yes. My Menu can now be displayed by pressing the n button when in a shooting mode. Changing Playback Functions Last seen Resumes with the image last viewed. Last shot Resumes with the most recently shot image. C O P Y

slide 159:

159 In the 3 tab you can change the sounds played for each camera operation or set the start-up image that appears when the camera power is turned on. Change Sounds ● Choose Sound Options then press the m button. ● Press the op buttons or turn the  dial to choose an option. ● Press the qr buttons to choose a setting. Changing the Start-up Screen ● Choose Start-up Image then press the m button. ● Press the qr buttons to choose a setting. Setting a Recorded Image as the Start-up Screen Image When you press the 1 button and set the camera to Playback mode you can register sounds and images. ● Choose Start-up Image then press the m button. ● Press the qr buttons to choose 3 then press the m button. Changing the Start-up Image or Sound 1 2 Preset sounds. 3 You can register your sounds using the supplied software p. 160. No start-up image. 1 2 Preset images. 3 You can register your images. You can register the start-up image using the supplied software. C O P Y

slide 160:

Changing the Start-up Image or Sound 160 ● Press the qr buttons or turn the  dial to choose an image then press the m button. ● Press the qr buttons or turn the  dial to choose OK then press the m button to complete registration. You can register sounds and start-up screen images that come with the included software to the camera. Refer to the Software Guide for details. Any previously registered start-up image will be overwritten when registering a new start-up image. Using the included software to register sounds and the start-up screen image C O P Y

slide 161:

161 Useful Information This chapter introduces how to use the separately sold accessories troubleshooting tips and contains lists of functions. The index also appears at the end. 9 C O P Y

slide 162:

162 If you use AC Adapter Kit ACK-DC50 sold separately you can use the camera without worrying about how much charge is left in the battery. Insert the plug into the coupler. ● Firmly insert the DC plug of the compact power adapter cable into the DC Coupler terminal. Insert the coupler. ● Open the cover p. 16 and insert the coupler as shown until it locks into place with a click. Close the cover. ● Press and hold the DC Coupler cable cover using the cable then close the memory card/battery cover. Connect the power cord. ● Connect the power cord to the compact power adapter then plug the other end into a power outlet. ● You can turn the camera on to use it. ● After you finish turn off the camera and unplug the power cord from the power outlet. Using Household Power DC Coupler DR-50 DC Coupler Cable Cover C O P Y

slide 163:

Using the Lenses Sold Separately 163 When attaching the Tele-converter TC-DC58D you can take shots from even further away. The lens changes the focal length of the camera body’s lens by a factor of 1.4x To attach the tele-converter lens you also need the Conversion Lens Adapter LA-DC58K sold separately. Remove the ring. ● Be sure the camera is turned off. ● While pressing the ring release button turn the ring in the direction of the arrow . ● When the “ ” mark on the ring and the “ ” mark on the camera are aligned lift off the ring. Attach the conversion lens adapter. ● Align the “ ” mark on the conversion lens adapter with the “ ” mark on the camera and turn the adapter in the direction of the arrows until it locks. ● To remove hold down the ring release button while turning the adapter in the opposite direction. The AC adapter kit can also be used when abroad The AC adapter kit can be used in regions that have 100 - 240 V 50/60 Hz AC power. If the plug does not fit the outlet use a commercially available plug adapter. Do not use devices such as electrical transformers for foreign travel because they will cause malfunctions. Do not unplug the plug and power cord with the camera turned on. This could erase images you have taken or damage the camera. Using the Lenses Sold Separately C O P Y

slide 164:

Using the Lenses Sold Separately 164 Attach the tele-converter lens. ● Turn the lens in the direction of the arrow to attach it securely to the camera. Adjust converter settings. ● Turn on the camera. ● Choose Converter from the 4 tab and press the qr buttons to choose TC- DC58D. If IS Mode is set to Off it is not necessary to make converter settings. When you remove the converter from the camera return the converter setting to None. • When using the built-in flash the outer edges of images especially the lower right may be darkened. • When using the tele-converter set the camera near the maximum telephoto. At other zoom settings the image will appear as if its corners have been cut off. • Use the screen for shooting. If you use the viewfinder for shooting a portion of the view will be blocked by the attachments. •8 mode is not available. • Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. • If you shoot in L while using these lens attachments the supplied software cannot be used to accurately stitch the images back together. C O P Y

slide 165:

165 You can change the color of the ring using the separately sold Ring Accessory Kit RAK-DC-2. Remove the ring. ● Be sure the camera is turned off. ● While pressing the ring release button turn the ring in the direction of the arrow . ● When the “ ” mark on the ring and the “ ” mark on the camera are aligned lift off the ring. Attach the ring. ● Align the “ ” mark on the ring with the “ ” mark on the camera and turn the ring in the direction of the arrow. Changing the Ring Color Sold Separately C O P Y

slide 166:

166 By using the RS60-E3 Remote Switch sold separately you can avoid any camera shake that may occur when you press the shutter button. The remote switch is useful when using slow shutter speeds. Connect the remote switch. ● Be sure the camera is turned off. ● Open the terminal cover and insert the remote switch plug. Shoot. ● Press the release button on the remote switch to shoot. Using the Remote Switch Sold Separately Bulb photographs cannot be taken with this camera. C O P Y

slide 167:

167 You can make your flash photography even clearer and more natural appearing with the use of a separately sold externally mounted flash. You are recommended to set the white balance to h. Speedlite 220EX 270EX 430EX II and 580EX II Attach the flash to the camera’s hot shoe. Turn the external flash on and turn the camera on. h red appears on the screen. When the flash is charged its pilot lamp will light. Display the flash settings screen. ● Choose the Flash Control from the 4 tab then press the m button. The options set on the flash will appear. Make the setting. ● Press the op buttons or turn the  dial to choose a menu item then press the qr buttons to complete the setting. ● The available settings differ depending on the flash p. 167. • When an external flash is mounted you cannot set the built-in flash. • Some functions on Speedlite 220EX 270EX 430EX II and 580EX II cannot be used with this camera. • The flash may not fire when using Canon brand flashes other than Speedlite EX series models. Also automatic red-eye correction is not available. • Using a non-Canon brand flash particularly a high-voltage flash or flash accessories may inhibit normal operation or damage the camera. Using an Externally Mounted Flash Sold Separately C O P Y

slide 168:

Using an Externally Mounted Flash Sold Separately 168 ● In modes other than G M B D and 8 flash settings cannot be changed since the flash adjusts and fires automatically. Using Speedlite 430EX II and 580EX II Using the separately sold Speedlite Bracket SB- E2 prevents unnatural shadows from appearing on the sides of objects when shooting from a vertical position. However depending on the angle the bracket may interfere with opening the LCD monitor. Please use the camera with the LCD monitor closed and the screen facing outward. You can use the Speedlite 380EX 420EX 430EX 550EX and 580EX in the same manner. C O P Y

slide 169:

Using an Externally Mounted Flash Sold Separately 169 Macro Ring Lite MR-14EX and Macro Twin Lite MT-24EX The Conversion Lens Adapter LA-DC58K Off Camera Shoe Cord OC-E3 and Bracket BKT-DC1 all sold separately are required to attach the Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX to the camera. Prepare the conversion lens adapter. ● Rotate the conversion lens adapter in the direction indicated by the arrow to detach the front and back components. ● Only the back component is required when attaching the Macro Ring Lite MR- 14EX or Macro Twin Lite MT-24EX. Remove the ring. ● Be sure the camera is turned off. ● While pressing the ring release button turn the ring in the direction of the arrow . ● When the “ ” mark on the ring and the “ ” mark on the camera are aligned lift off the ring. Attach the back component of the conversion lens adapter. ● Align the “ ” mark on the back component of the conversion lens adapter with the “ ” mark on the camera and turn the adapter in the direction of the arrows until locked. ● To remove hold down the ring release button while turning the adapter in the opposite direction. Back Component Front Component Attach to camera Attach Detach C O P Y

slide 170:

Using an Externally Mounted Flash Sold Separately 170 Attach the Off Camera Shoe Cord to the bracket. ● Slide the bracket screw to the outer end of the bracket and secure the screw into the tripod socket on the Off Camera Shoe Cord. Attach the bracket. ● Slide the bracket screw to the outer end of the bracket and secure the screw into the tripod socket on the bottom of the camera. Attach the Off Camera Shoe Cord. ● Attach the camera connection component of the Off Camera Shoe Cord to the hot shoe on top of the camera. Attach the controller. ● Attach the controller for the Macro Ring Lite or Macro Twin Lite to the flash connection component of the Off Camera Shoe Cord. C O P Y

slide 171:

Using an Externally Mounted Flash Sold Separately 171 Attach the flash to the conversion lens adapter. ● When attaching the Macro Ring Lite MR- 14EX press and hold the release buttons on both sides of the Macro Ring Lite and fit it onto the conversion lens adapter. ● When attaching the Macro Twin Lite MT- 24EX attach the flash heads to their respective flash head mounts . Press and hold the release button on the top of the external ring and fit it onto the conversion lens adapter . Set the camera to e mode. ● Press the q button to choose e. The shooting mode will switch between e and with each press. Set ND Filter to On. ● Press the m button and use the op buttons to choose then press the qr buttons or use the  dial to choose . Configure the externally mounted flash. ● Make settings as shown on Steps 4 – 5 on p. 167. C O P Y

slide 172:

Using an Externally Mounted Flash Sold Separately 172 Configure the externally mounted flash. ● You can shoot in E-TTL automatic flash exposure compensation mode just by setting the camera’s shooting mode to G B or M. ● Set the aperture values in B or D then shoot. • Be sure the cords from the Off Camera Shoe Cord Macro Ring Lite or Macro Twin Lite do not obstruct or interfere with the flash. • While shooting with a tripod adjust the direction of the camera so that the flash heads do not contact the tripod or bracket. • Depending on the placement of the controller it may come into contact with the LCD monitor. • Use the screen for shooting. The viewfinder cannot be used. •8 mode is not available. C O P Y

slide 173:

Using an Externally Mounted Flash Sold Separately 173 Configuring the Externally Mounted Flash Sold Separately • The maximum flash synchro shutter speed is 1/250 second. • The flash will automatically adjust its output when Flash Mode is set to Auto. Flash exposure compensation and safety FE can be set when the flash is set to auto exposure. However when performing flash exposure compensation with the camera make sure to set the flash exposure compensation on the flash to +0. • The flash output can be adjusted on the camera or the flash if Flash Mode is set to Manual. With Speedlite 220EX and 270EX settings cannot be made on the flash. In D mode you can set the flash output with the camera even if the flash unit is set to E-TTL automatic flash exposure compensation. E-TTL will display on the flash but the flash will fire manually. Also if the flash compensation value is changed on the flash the flash output will also change. • Settings available on the camera are as follows. Item Options Shooting mode G MB D 8 Flash Mode Auto/Manual 1 Flash Exp.Comp –3 to +3 – Flash Output 1/128 2 to 1/1 in 1/3 steps Shutter Sync. 1st-curtain/2nd-curtain/Hi-Speed 3 Slow Synchro On/Off 4 4 Wireless Func. 5 On/Off Red-Eye Corr. On/Off Red-Eye Lamp On/Off Safety FE On/Off – Clear Flash Settings 6 Resets settings to their default values. 1 Fixed to Manual. 2 1/64 for Speedlite 220EX 270EX and 430EX II. 3 Not available with Speedlite 220EX. 4 Fixed to On. 5 Settings aside from On/Off are set on the flash. Not available with Speedlite 220EX 270EX or 430EX II. When set to On Shutter Sync. cannot be set to 2nd-curtain. Even if you set Shutter Sync. to 2nd-curtain with the camera it will change to 1st-curtain. 6 Slow Synchro Safety FE Red-Eye Corr. and Red-Eye Lamp can also be returned to their default values using Reset All in the camera’s 3 menu p. 52. Setting is not available with the Speedlite 220EX. C O P Y

slide 174:

Using an Externally Mounted Flash Sold Separately 174 Canon flashes other than the Speedlite EX series will fire at their full strength. For the optimal aperture values and ISO speeds for the distance to the subject refer to the guide number listed in the flash’s user guide. • The settings from the flash are applied to the flash mode flash exposure compensation flash output shutter synchro and wireless function when you turn on the camera. • The following functions can be used. - Auto Exposure Set the camera to E-TTL mode - FE Lock When Flash Mode is Auto - Auto Zoom Not available with the 220EX or 270EX • Please read the manuals that came with the flash and speedlite transmitter. • For continuous shooting the flash can be used in quick flash mode pilot lamp lit green. In this case light emission may be less than with full flash pilot lamp lit red 580EX II only. • If the external flash has been set to stroboscopic flash the flash’s set up menu cannot be chosen 580EX II only. Other Canon flashes. C O P Y

slide 175:

175 If you think there is a problem with the camera first check the following. If the items below do not solve your problem contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the power button but nothing happened. • Confirm that the battery is properly inserted p. 16. • Confirm that the memory card/battery cover is securely closed p. 16. • If the battery terminals are dirty battery performance will decrease. Clean the terminals with a cotton swab and re-insert the battery several times. Battery is consumed quickly. • Battery performance decreases at low temperatures. Warm the battery by placing it for example in your pocket with the terminal cover on. Lens will not retract. • Confirm that the memory card/battery cover is securely closed. After closing the memory card/battery cover turn the power on then back off p. 17. TV output Image is distorted or not showing on TV p. 128. Shooting Cannot shoot. • When in Playback mode p. 28 press the shutter button halfway p. 24. The screen is off p. 44. Screen does not display properly in dark places p. 46. Screen does not display properly while shooting. Please note the following will not be recorded in still images but will be recorded in movies. • When the camera is subjected to powerful light sources the display may darken. • Under fluorescent lighting the screen may flicker. • When shooting bright light sources a bar of light purplish red may appear on the screen. h appears on the screen and the shot cannot be taken even though the shutter button was pressed fully p. 27. appears when the shutter button was pressed halfway p. 26. • Set the IS mode to Continuous p. 155. • Set the flash to h p. 73. • Increase the ISO speed p. 78. • Attach the camera to a tripod. Troubleshooting C O P Y

slide 176:

Troubleshooting 176 Image is blurred. • Press the shutter button halfway to focus on the subject then press fully to shoot p. 24. • Shoot the subject within the focusing distance p. 187. • Set the AF-assist Beam to On p. 152. • Confirm that functions which you do not intend to use macro etc. are not set. • Shoot using the focus lock or AF lock pp. 86 91. Even when you press the shutter button halfway the AF frame does not appear and the camera does not focus. • If you center on the light and dark contrasting area of the subject and push the shutter button halfway or repeatedly push the shutter button halfway the frame will appear and the camera will focus. Subject is too dark. • Set the flash to h p. 73. • Adjust the brightness with exposure compensation p. 73. • Adjust the brightness with the i-Contrast function pp. 103 141. • Use the AE lock or spot metering to shoot p. 96. Subject is too bright overexposed. • Set the flash to p. 63. • Adjust the brightness with exposure compensation p. 73. • Use the AE lock or spot metering to shoot p. 96. • Reduce the light illuminating the subject. Image is dark even though the flash fired p. 26. • Increase the ISO speed p. 78. • Shoot within an appropriate distance for flash photography p. 73. • Adjust the flash exposure compensation or the flash output pp. 105 106. Image taken using the flash is too bright overexposed. • Shoot within an appropriate distance for flash photography p. 73. • Set the flash to p. 63. • Adjust the flash exposure compensation or the flash output pp. 105 106. White dots appear on the image when shooting with the flash. • Light from the flash has reflected off dust particles or other objects in the air. Image appears rough or grainy. • Shoot with the ISO speed on a lower setting p. 78. • Depending on the Shooting mode when shooting in a high ISO speed the image may appear rough or grainy pp. 57 59. Eyes appear red p. 104. • Set the Red-Eye Lamp to On p. 153. When shooting with the flash the lamp on the front of the camera lights p. 42 and for approximately 1 second while the camera is reducing red-eye it is not possible to shoot. It is more effective if the subject is looking directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. C O P Y

slide 177:

Troubleshooting 177 Recording images to the memory card takes a long time or continuous shooting slows down. • Perform a low-level format of the memory card in the camera p. 53. When you can’t make settings for shooting functions or FUNC. menu. • The items in which settings can be made differ depending on the shooting mode. Refer to “Functions Available in Each Shooting Mode” p. 180. Shooting movies Correct shooting time does not display or stops. • Format the memory card in the camera p. 53 or use a memory card capable of recording at high speeds. Even when the shooting time does not display properly the recorded video will be the length that it was actually shot p. 32. appeared on the screen and shooting ended automatically. The camera’s internal memory was insufficient. Try one of the following. • Perform a low-level format of the memory card in the camera p. 53. • Change the image quality setting p. 115. • Use a memory card capable of recording at high speeds p. 115. Playback Cannot play back images or movies. • If the file name or folder structure is changed on a computer you may not be able to play back images or movies. Refer to the Software Guide for information regarding folder structure or file names. Playback stops or audio cuts out. • Use a memory card that has been formatted on this camera p. 53. • If you copy a movie to a memory card that reads slowly playback may interrupt momentarily. • Depending on its capabilities the computer may drop frames or the audio may cut out when playing movies. Computer Cannot transfer images to a computer. It may be possible to solve the problem when the camera is connected to the computer via cable by slowing the transfer speed. • Remove the cable then press and hold the n button and press the o and m buttons. In the screen that appears choose B. C O P Y

slide 178:

178 If error messages appear on the screen try one of the following solutions. No memory card • The memory card is not installed in the correct direction. Install the memory card in the correct direction p. 16. Card locked • The SD memory card or SDHC memory card’s write protect tab is set to “LOCK”. Unlock the write protect tab p. 18. Cannot record • You attempted to shoot an image without the a memory card or with a memory card installed incorrectly. Install the memory card in the correct direction when shooting p. 16. Memory card error p. 53 • Contact your Canon Customer Support Help Desk as there may be a problem with the camera. Memory card full • There is not enough free space on the memory card to shoot pp. 25 55 71 87 or edit images pp. 138 – 142. Erase the images pp. 29 133 to open space for new images or insert an empty memory card p. 16. Change the battery pack p. 14 No image. • There are no images recorded on the memory card that can be displayed. Protected p. 130 Unidentified Image/Incompatible JPEG/Image too large./Cannot play back AVI/RAW • Unsupported images or data or corrupted image data cannot be displayed. • Images manipulated on a computer that have had their file name changed or have been taken with a different camera may not display. Cannot magnify/Cannot rotate/Cannot modify image/Cannot register this image/Cannot modify/Cannot assign to category • Incompatible images cannot be magnified p. 127 rotated p. 137 edited pp. 138 – 142 registered to the start-up screen p. 159 categorized p. 135 or added to a print list p. 144. • Images manipulated on a computer that have had their file name changed or have been taken with a different camera may not be magnified rotated edited registered to the start-up screen categorized or added to a print list. • Movies cannot be magnified p. 127 edited pp. 138 – 142 added to a print list p. 143 or registered to the start-up screen p. 159. List of Messages that Appear on the Screen C O P Y

slide 179:

List of Messages that Appear on the Screen 179 Cannot select • When choosing the selection range pp. 131 134 146 you tried to choose a starting image that was after the last image or you tried to choose an ending image that was before the starting image. • You tried to choose more than 501 images in the selection range pp. 131 134 146. Too many marks. • You chose more than 998 images in print settings. Choose less than 998 images p. 144. Cannot complete • Print settings could not be saved correctly. Reduce the number of selected images and try again p. 144. Naming error • The file name could not be created because there is an image with the same name as the folder that the camera is attempting to create or the highest possible file number has already been reached p. 149. In the 3 menu change File Numbering to Auto Reset p. 148 or format the memory card p. 53. Communication error • Images could not be transferred to the computer or printed due to the large amount of images approx. 1000 stored on the memory card. Use a commercially available USB card reader to transfer the images. Insert the memory card into the printer’s card slot to print. Lens error restart camera • A lens error was detected. Press the power button to turn the camera off and back on p. 43. If this error message continues to appear contact your Canon Customer Support Help Desk as there may be a problem with the lens. • This error can occur if you hold the lens while it is in motion or when using it in a location with excessive dust or sand in the air. Exx xx: number • A camera error was detected. Press the power button to turn the camera off and back on p. 43. • If an error code appears directly after taking a picture the shot may not have been recorded. Check image in Playback mode. • If this error code reappears note the number and contact your Canon Customer Support Help Desk as there may be a problem with the camera. C O P Y

slide 180:

180 Functions Available in Each Shooting Mode Shooting modes DBMG Function Exposure Compensation p. 73/Exposure Shift p. 116 1 — ISO Speed p. 78 1 — 1 Self-Timer pp. 67 68 83 84 1 1 1 Flash p. 73 1 —— — 1 1 — — 1 Program Shift p. 96 1 — AE Lock/FE Lock pp. 96 97 116 1 — AF Lock p. 91 1 Focusing Zone p. 77 1 1 All Range ————— Manual Focus p. 94 1 Changing AF Frame Position and Size p. 89 1 Face Selection p. 92 1 FUNC. Menu White Balance p. 79 1 1 My Colors p. 82 1 1 Bracketing pp. 95 98 1 1 — 1 Flash Exposure Compensation p. 105 1 — Flash Output Settings p. 106 1 — ND Filter p. 99 1 Drive Mode p. 81 1 1 3 1 Recording Pixels pp. 74 115/Compression Ratio Image Quality p. 74 1 1 The available settings depend on the registered shooting modes. 2 … if the flash fires 3 f AF lock and t set to . 4 h not available. 5 not selectable. 6 Fixed to D. ÒÎ " h … e hS W C O P Y

slide 181:

Functions Available in Each Shooting Mode 181 A 8 K E IJFV’ UtwS yOPT YLX z —— — — —— —— —— —— —— —— — —— — — — — — — — — — —— — — — —— — — 2 2 — 2 2 — — —— — —— 2 2 — 2 2 — —— —— —— —— —— —— —— — —— — — —— —— — — — — —— —— —— —— ——— —— — — — — —— —— —— —— —— —— — —— — — — — — —— — — —— —— — — — —— — — — —— —— —— —— ——— —— — — — — — — — — — — — — — —— —— —— —— ——— —— — — — — — — — —— — FUNC. Menu —— —— —— —— —— —— — —— — — 4 — —— —— —— —— —— —— — —— — — — — — — — —— —— —— —— ——— —— — — — — — — — — —— —— —— —— ——— —— — — — — —— —— —— —— —— —— — —— — — — — — — — — — —— —— —— —— ——— —— — — — — — — — — —— —— —— —— ——— —— — — —— — — —— — — — —— — 5 6 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 7 7 Recording pixel setting not selectable. Selectable or set automatically. — Not selectable C O P Y

slide 182:

182 4 Shooting Menu Menus Shooting modes DBMG Function AF Frame p. 88 Face AiAF 1 Center 1 2 2 2 2 FlexiZone 1 2 2 2 2 Digital Zoom p. 64 Standard 1 Off 1 Digital Tele-Converter 1.4x/2.3x 1 AF-Point Zoom p. 90 On/Off 1 Servo AF p. 91 On/Off 1 Continuous AF p. 152 On/Off 1 AF-assist Beam p. 152 On/Off 1 MF-Point Zoom p. 94 On/Off 1 Safety MF p. 94 On/Off 1 Flash Control pp. 104 105 106 153 Flash Mode Auto 1 — Manual 1 — Flash Exp. Comp –2 to +2 1 — Flash Output Minimum/Medium/Maximum 1 — Shutter Sync. 1st-curtain/2nd-curtain 1 Red-Eye Corr. On/Off 1 Red-Eye Lamp On/Off 1 Safety FE On/Off 1 — i-Contrast p. 103 Auto/Off 1 Spot AE Point p. 93 Center/AF Point 1 Safety Shift p. 101 On/Off 1 — — Wind Filter p. 116 On/Off 1 —— —— Review p. 153 Off/2 – 10 sec./Hold 1 Review Info p. 154 Off/Detailed/Focus Check 1 Blink Detection p. 107 On/Off 1 Custom Display p. 154 Shooting Info 1 Grid Lines 1 3:2 Guide 1 Histogram 1 Reverse Disp. p. 19 On/Off 1 IS Mode p. 155 Continuous/Off/Shoot Only/Panning 1 Converter p. 163 None/TC-DC58D 1 Date Stamp p. 66 Off/Date/Date Time 1 Record + p.76 On/Off 1 Set Shortcut button p. 156 1 Save Settings p. 108 1 The available settings depend on the registered shooting modes. 2 Center when the LCD monitor is off FlexiZone when it is on. C O P Y

slide 183:

Menus 183 A 8 K E IJFV’ UtwSyOPT YLX z — — — 6 6 —— — —— — — — — —— ——— —— —— —— —— — — — — —— —— — —— —— — — — — —— — 3 — — —— — 5 — 5 — 5 — —— — — — — — — —— — — — — — — — — —— — — — — —— ——— —— —— —— —— — — — — —— — —— ——— —— —— —— —— — — — — — — — — —— ——— —— —— —— —— — — — — —— — —— ——— —— —— —— —— — — — — — — —— — — — — —— 5 5 5 5 5 5 5 — 5 5 — 5 5 5 5 5 5 5 —— 4 4 — —— ——— —— —— —— —— — — — — — — — — —— ——— —— —— —— —— — — — — — — — — —— ——— —— —— —— —— — — — — — — — — —— ——— —— —— —— —— — — —— —— — — — — —— — — — — — — — 5 — — —— — —— — —— ——— —— —— —— —— — — — — — — — — —— ——— —— —— —— —— — — — — 3 On when subject movement is detected. 4 Fixed to Auto. 5 Fixed to On. 6 AiAF Selectable or set automatically. Selectable only no settings available. — Not selectable C O P Y

slide 184:

Menus 184 3 Set up Menu Item Options/Summary Ref. Page Mute On/Off p. 50 Volume Set all operation sounds 5 levels. p. 50 Sound Options Set the sounds for each camera operation. p. 159 Hints Tips On/Off p. 148 LCD Brightness Set within a range of ±2. pp. 19 51 Start-up Image Add an image as start-up image. p. 159 Format Formats memory card erasing all data p. 53 File Numbering Continuous/Auto Reset p. 148 Create Folder Monthly/Daily p. 149 Lens Retract 1 min./0 sec. p. 149 Power Saving Auto Power Down: On/Off Display Off: 10 20 or 30 sec./1 2 or 3 min. p. 54 Time Zone Home/World p. 150 Date/Time Date and time settings p. 21 Distance Units m/cm ft/in p. 151 Video System NTSC/PAL p. 128 Language Choose display language. p. 22 Reset All Returns camera to default settings. p. 52 Default setting C O P Y

slide 185:

Menus 185 1 Playback Menu 2 Print Menu Item Options/Summary Ref. Page Slideshow Plays back images automatically. p. 125 Erase Erases images. p. 133 Protect Protects images. p. 130 Rotate Rotates images. p. 137 My Category Categorizes images. p. 135 i-Contrast Corrects dark portions and contrast in still images. p. 141 Red-Eye Correction Corrects red eyes in still images. p. 142 Trimming Trims portions of still images. p. 139 Resize Resizes and saves still images. p. 138 My Colors Adjusts colors in still images. p. 140 Scroll Display On/Off p. 123 Resume Last seen/Last shot p. 158 Transition Fade/Slide 1/Slide 2/Off p. 127 Default setting Item Options/Summary Ref. Page Print Displays printing screen. p. 30 Select Images Qty. Chooses individual images for printing. p. 145 Select Range Chooses starting and ending images for printing. p. 146 Select All Images Chooses all images for printing. p. 146 Clear All Selections Cancels all settings for printing. p. 146 Print Settings Sets the printing style. p. 144 C O P Y

slide 186:

186 • This camera is a high-precision electronic device. Do not drop it or subject it to strong impacts. • Never place the camera close to magnets or motors that generate strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. • If water droplets have fallen onto or dirt is stuck on the camera or LCD monitor wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force. • Never use cleaners containing organic solvents to wipe the camera or LCD monitor. • Use a commercially available blower brush to remove dust from the lens. For stubborn dirt contact the closest Canon Customer Support Help Desk as listed on the customer support leaflet supplied with your camera. • When you move the camera rapidly from cold to hot temperatures condensation may form on the internal or external surfaces of the camera. To avoid condensation put the camera in an airtight resealable plastic bag and let it adjust to temperature changes slowly before removing it from the bag. • If condensation has formed stop using the camera immediately. Continued use may damage the camera. Remove the battery and memory card and wait until the moisture has completely evaporated before resuming use. Handling Precautions C O P Y

slide 187:

187 Camera Effective Pixels . . . . . . . . . . . . . Approx. 10 million Image Sensor . . . . . . . . . . . . . . . . . . . . . 1/1.7-inch type CCD Total number of pixels: Approx. 10.4 million Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 W – 30.5 T mm 35mm film equivalent: 28 W – 140 T mm f/2.8 W – f/4.5 T Digital Zoom . . . . . . . . . . . . . . . . . . . . . . Approx. 4.0x Up to approx. 20x in combination with the optical zoom Viewfinder. . . . . . . . . . . . . . . . . . . . . . . . Real-image zoom viewfinder Picture coverage approx. 77 representative value Eyepoint: 15 mm 0.59 in. Dioptric adjustment: –3.0 to +1.0 m –1 dpt LCD Monitor . . . . . . . . . . . . . . . . . . . . . . 2.8 TFT LCD color monitor Approx. 461000 dots Picture coverage 100 AF Frame Mode . . . . . . . . . . . . . . . . . . . Face AiAF/Center/FlexiZone Servo AF. . . . . . . . . . . . . . . . . . . . . . . . . On/Off Focusing Range from end of lens . . . . Auto Low Light: 1 cm 0.4 in. – infinity W/ 30 cm 12.0 in. – infinity T Normal: 50 cm 1.6 ft. – infinity Macro: 1 – 50 cm 0.4 in. – 1.6 ft. W/30 – 50 cm 12.0 in. – 1.6 ft. T Manual Focus: 1 cm 0.4 in. – infinity W/ 30 cm 12.0 in. – infinity T Sports mode: 1.0 m 3.3 ft. – infinity W/ 2.0 m 6.6 ft. – infinity T Kids Pets: 1.0 m 3.3 ft. – infinity Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical shutter and electronic shutter Shutter Speed. . . . . . . . . . . . . . . . . . . . . 1 – 1/4000 sec. 15 – 1/4000 sec. Total shutter speed range Image Stabilization . . . . . . . . . . . . . . . . . Lens-shift type Metering System. . . . . . . . . . . . . . . . . . . Evaluative Center-weighted average or Spot Exposure Compensation . . . . . . . . . . . . ±2 stops in 1/3-stop increments ISO speed. . . . . . . . . . . . . . . . . . . . . . . . Auto ISO 80/100/200/400/800/1600/3200 Standard Output Sensitivity Recommended Exposure Index White Balance . . . . . . . . . . . . . . . . . . . . Auto Day Light Cloudy Tungsten Fluorescent Fluorescent H Flash Underwater Custom1 Custom2 Built-in Flash. . . . . . . . . . . . . . . . . . . . . . Auto On Slow Synchro Off Flash exposure compensation/Flash output/2nd- curtain synchro/Red-eye reduction/Red-eye correction/FE lock/Safety FE settings available Built-in Flash Range . . . . . . . . . . . . . . . . 50 cm – 7.0 m 1.6 – 23 ft. W/ 50 cm – 4.0 m 1.6 – 13 ft. T Terminals for External Flash. . . . . . . . . . Hot shoe flash-sync contacts Specifications C O P Y

slide 188:

Specifications 188 Shooting Modes . . . . . . . . . . . . . . . . . . C1 C2 M Av Tv P Auto Low Light Quick Shot SCN Movie SCN Mode: Portrait Landscape Night Snapshot Kids Pets Indoor Sports Sunset Night Scene Fireworks Beach Underwater Aquarium Foliage Snow Color Accent Color Swap Stitch Assist Movie Mode: Standard Color Accent Color Swap Continuous Shooting. . . . . . . . . . . . . . . Continuous: Approx. 1.1 images/sec. Auto Approx. 2.4 images/sec. Low Light Continuous Shooting AF: Approx. 0.7 images/sec. Continuous Shooting LV: Approx. 0.8 images/sec. Self-timer. . . . . . . . . . . . . . . . . . . . . . . . FaceSelf-Timer Approx. 10-sec./Approx. 2-sec. delay Custom Timer i-Contrast. . . . . . . . . . . . . . . . . . . . . . . . Auto/Off Recording Media . . . . . . . . . . . . . . . . . . SD memory card SDHC memory card MultiMediaCard MMCplus memory card HC MMCplus memory card File Format . . . . . . . . . . . . . . . . . . . . . . Design rule for Camera File system and DPOF compliant Data Type . . . . . . . . . . . . . . . . . . . . . . . Still images: Exif 2.2 JPEG RAW CR2 Movies: MOV Image data: H.264 Audio data: Linear PCM Mono Use Digital Photo Professional for processing. Compression . . . . . . . . . . . . . . . . . . . . . Fine Normal Number of Recording Pixels Still images . . . . . . . . . . . . . . . . . . . . . Large: 3648 x 2736 pixels Medium 1: 2816 x 2112 pixels Medium 2: 2272 x 1704 pixels Medium 3: 1600 x 1200 pixels Small: 640 x 480 pixels Widescreen: 3648 x 2048 pixels RAW: 3648 x 2736 pixels Movies. . . . . . . . . . . . . . . . . . . . . . . . . 640 x 480 pixels 30 frames/sec. 320 x 240 pixels 30 frames/sec. Number of Possible Shots. . . . . . . . . . . LCD Monitor On: Approx. 390 images LCD Monitor Off: Approx. 1000 images Based on CIPA standardized measurement Playback Function. . . . . . . . . . . . . . . . . Single Image Movie Magnified Focus Index Magnified Filtered Playback Slideshow Scroll Display Editing Function. . . . . . . . . . . . . . . . . . . Erase Protect My Category Resize My Colors i-Contrast Trimming Rotate Red-Eye Correction Direct Print Type . . . . . . . . . . . . . . . . . . PictBridge capable Interface . . . . . . . . . . . . . . . . . . . . . . . . Hi-Speed USB Dedicated connector with unified type of digital audio and video HDMI HDMI mini connector mini-B compatible Video/Audio output NTSC and PAL capable mono audio Communication Settings . . . . . . . . . . . . MTP PTP C O P Y

slide 189:

Specifications 189 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Pack NB-7L rechargeable lithium-ion battery AC adapter kit ACK-DC50 Operating Temperatures . . . . . . . . . . . . 0 – 40 °C 32 – 104 °F Operating Humidity. . . . . . . . . . . . . . . . . 10 – 90 Dimensions excluding protrusions . . . . 112.1 x 76.2 x 48.3 mm 4.41 x 3.00 x 1.90 in. Weight camera body only. . . . . . . . . . . Approx. 355 g 12.5 oz. Battery Pack NB-7L Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable lithium-ion battery Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4 V DC Capacity . . . . . . . . . . . . . . . . . . . . . . . . . 1050 mAh Charging cycles . . . . . . . . . . . . . . . . . . . Approx. 300 times Operating temperature . . . . . . . . . . . . . . 0 – 40 °C 32 – 104 °F Dimensions. . . . . . . . . . . . . . . . . . . . . . . 32.5 x 45.4 x 17.7 mm 1.28 x 1.79 x 0.70 in. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 47 g 1.7 oz. Battery Charger CB-2LZ/CB-2LZE Rated input . . . . . . . . . . . . . . . . . . . . . . . 100 – 240 V AC 50/60 Hz 0.14 A 100 V – 0.08 A 240 V 14 VA 100 V – 19.2 VA 240 V Rated output. . . . . . . . . . . . . . . . . . . . . . 8.4 V DC 0.70 A Charge time . . . . . . . . . . . . . . . . . . . . . . Approx. 2 hours 20 min. for Battery Pack NB-7L Operating temperature . . . . . . . . . . . . . . 0 – 40 °C 32 – 104 °F Dimensions. . . . . . . . . . . . . . . . . . . . . . . 92.5 x 27.0 x 62.0 mm 3.64 x 1.06 x 2.44 in. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 92 g 3.6 oz. CB-2LZ Approx. 85 g 3.0 oz. CB-2LZE excluding power cord Tele-converter TC-DC58D Sold Separately Magnification . . . . . . . . . . . . . . . . . . . . . 1.4x Focal Length 1 . . . . . . . . . . . . . . . . . . . . 196 mm 35mm film equivalent Focusing Range 1 . . . . . . . . . . . . . . . . . 55 cm 1.8 ft. – infinity T 2 Thread Diameter. . . . . . . . . . . . . . . . . . . 58 mm standard filter thread 3 Dimensions Diameter x Length . . . . . . . 69.0 x 41.2 mm 2.72 x 1.62 in. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 140 g 4.94 oz. Conversion Lens Adapter LA-DC58K Sold Separately Thread Diameter. . . . . . . . . . . . . . . . . . . 58 mm standard filter thread Dimensions Diameter x Length . . . . . . . 63.8 x 51.6 mm 2.51 x 2.03 in. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 30 g 1.06 oz. 1 When mounted on PowerShot G11 Max. telephoto. 2 From front of the mounted conversion lens during normal shooting T: Max. telephoto. 3 Conversion Lens Adapter LA-DC58K is required when mounted on PowerShot G11. Bracket BKT-DC1 Sold Separately Dimensions. . . . . . . . . . . . . . . . . . . . . . . 220.0 x 32.0 x 19.0 mm 8.66 x 1.26 x 0.75 in. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 90 g 3.2 oz. • All data is based on tests by Canon. • Camera specifications or appearance are subject to change without notice. C O P Y

slide 190:

Specifications 190 About MPEG-4 Licensing This product is licensed under ATT patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG- 4 compliant video that was encoded only 1 for a personal and non- commercial purpose or 2 by a video provider licensed under the ATT patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard. Notice displayed in English as required. USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA USA only Included lithium battery contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. C O P Y

slide 191:

191 Numerics 3:2 Guide ................................................155 A AC Adapter Kit ..................................40 162 Accessories ..........................................2 38 AE Lock ....................................................96 AF Focus AF Frame ..................................................26 AF Lock ....................................................91 Aquarium Scene Mode ...........................58 AV Cable ............................................2 128 B Battery Battery Charger ...............................14 40 Charge Indicator ....................................15 Power Saving ........................................54 Recharge ...............................................14 Battery Charger ........................................14 Beach Scene Mode ................................58 Black and White Images ...........................82 C Camera Shake ............................63 78 155 Clock Function ..........................................54 Color Accent Scene Mode ...........109 114 Color Swap Scene Mode .............110 114 Components Guide ...................................42 Compression Ratio Image Quality .........74 Continuous Shooting ................................81 AF .........................................................81 LV ..........................................................81 Control Dial ...........................................9 43 D Date and Time Adding to Image ....................................66 Changing ...............................................21 Settings .................................................20 Date/Time Date and Time Default Settings ........................................52 Deleting Erasing DIGITAL CAMERA Solution Disk ...............2 Digital Tele-Converter ...............................65 Digital Zoom .............................................64 Direct Print ................................................30 Display Language .....................................22 DPOF ..............................................143 144 E Editing i-Contrast .............................................141 My Colors ............................................140 Red-Eye Correction .............................142 Resizing Making Images Smaller .....138 Rotating Images ..................................137 Trimming .............................................139 Enlarged Display ....................................127 Equipment Default Settings .....................................52 Erasing All Images ..................................133 Erasing Images .........................................29 Error Messages ......................................178 Exposure AE Lock .................................................96 AEB Mode .............................................98 Correction ..............................................73 FE Lock .................................................97 F Face AiAF .................................................88 Face Selection ..........................................92 Face Self-Timer ........................................68 Factory Settings Default Settings FE Lock ....................................................97 File Number ............................................148 Filtered Playback ....................................123 Fireworks Scene Mode ..........................58 Flash Externally Mounted Flash ....................167 Off .........................................................63 On .........................................................73 Supplementary Flash ............................40 Focus AF Frame ..............................................26 AF Frame Mode ....................................88 AF Lock .................................................91 Index C O P Y

slide 192:

Index 192 AF-Point Zoom ...................................... 90 Face Selection ...................................... 92 Servo AF ............................................... 91 Focus Bracketing ...................................... 95 Focus Check .......................................... 126 Focus Lock ............................................... 86 Format Memory Card Formatting Formatting Memory Card ................. 23 53 FUNC. Menu Basic Operations ................................... 48 List ......................................................180 G Green Leaves/Autumn Foliage Scene Mode ........................................... 59 Grid Lines ............................................... 155 H High-Power Flash ..................................... 40 Histogram .........................................46 155 Household Power ................................... 162 I i-Contrast ........................................103 141 Images Display Time ....................................... 153 Editing Editing Erasing Images ..................................... 29 Playback View Protect ................................................. 130 Indicator .................................................... 43 Indoor Scene Mode ................................ 57 Interface Cable ..................................... 2 30 ISO Speed ................................................ 78 K KidsPets Scene Mode ......................... 57 L Lamp ..................................42 67 152 153 Landscape Scene Mode ........................ 56 LCD monitor Screen Low Light Scene Mode .......................... 60 M Macro .......................................................77 Manual Focus ........................................... 94 Memory Cards .................................... 16 18 Available Shots ............................... 18 75 Formatting .......................................23 53 Menu Basic Operations ................................... 49 List ......................................................182 Metering Mode ......................................... 93 Mode Dial ................................................. 42 Movie Editing .................................................119 Image Quality Frame Rate ............... 115 Mode ...................................................114 Recording Pixels ................................. 115 Shooting Time ............................... 32 115 Viewing Playback ............................... 33 MultiMediaCard/MMCplus/HC MMCplus Memory Card Memory Card My Category ........................................... 135 My Colors ......................................... 82 140 N Neck Strap Strap Night Scene Scene Mode ...................... 58 Night Snapshot Scene Mode ................. 56 Number of Shots ...................................... 15 P Package Contents Accessories Panoramic Photos .................................. 112 Personal Printing Guide ............................. 2 PictBridge .................................................30 Playback View Playback Button ....................................... 28 Playback With Transition Effects ............ 127 Portrait Scene Mode .............................. 56 Postcard Size ........................................... 75 Power Battery Power Saving ........................................... 54 Print Settings DPOF ............................. 143 Printer .......................................................30 Printing .....................................................30 Program AE .............................................. 72 C O P Y

slide 193:

Index 193 Protect ....................................................130 Q Quick Shot Mode Scene Mode ..............61 R RAW .........................................................76 Recording Pixels Image Size .................74 Red-Eye Auto Correction ...................................104 Correction ............................................142 Reduction ............................................153 Resizing Making Images Smaller .........138 Rotating Images .....................................137 S Screen Display Language .................................22 Information Displayed ...........................44 Menu Operations .............................48 49 Switching the Display ......................45 46 Scroll Display ..........................................122 SD/SDHC Memory Card Memory Card Self-Timer 10 second Self-Timer ............................67 Changing Delay and Number of Shots ...................................84 Face Self-Timer .....................................68 Two Second Self-Timer .........................83 Sepia Tones .............................................82 Servo AF ...................................................91 Shooting Date and Time Date/Time Shooting Information ........................44 155 Shooting Using a TV .................................86 Shutter Button ...........................................24 Slideshow ...............................................125 Snow Scene Mode .................................59 Software DIGITAL CAMERA Solution Disk ............2 Software Guide .......................................2 Transferring Images to a Computer ......34 Sound Settings .........................................50 Sports Scene Mode ................................57 Stitch Assist Scene Mode ....................112 Strap .....................................................2 13 Sunset Scene Mode ...............................57 Supplementary Flash ................................40 T Terminal ............................................30 128 Time Zone ..............................................150 Tone White Balance ...............................79 Transferring Images to a Computer ..........34 Travel Abroad ...................................15 150 Trimming .................................................139 Troubleshooting ......................................175 V Video Movies Viewfinder .................................................85 Viewing Playback ...................................28 Enlarged Display .................................127 Images on a TV ...................................128 Index Display .......................................122 Slideshow ............................................125 Viewing Images on a TV .........................128 W White Balance ..........................................79 Wide Recording Pixels ...........................75 World Clock ............................................150 Z Zoom ............................................25 31 64 C O P Y

slide 194:

194 MEMO C O P Y

slide 195:

195 Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003. FCC Notice Digital Camera Model PC1428 systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza Lake Success NY 11042 U.S.A. Tel No. 516 328-5600 C O P Y

slide 196:

Camera User Guide DIGITAL CAMERA Camera User Guide ENGLISH CDI-E410-030 XXXXXXX © CANON INC. 2009 PRINTED IN JAPAN Trademark Acknowledgments • The SDHC logo is a trademark. • HDMI the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Disclaimer • Reprinting transmitting or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • Every effort has been made to ensure that the information contained in this guide is accurate and complete. However if you notice any errors or omissions please contact the Canon customer service center indicated on the customer support list included with the product. • The above items notwithstanding Canon accepts no liability for damages due to mistaken operation of the products. Battery Charger CB-2LZ This product is not intended to be serviced. Should the product cease to function in its intended manner it should be returned to the manufacturer or be discarded. This power unit is intended to be correctly orientated in a vertical or floor mount position. IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A. use an attachment plug adapter of the proper configuration for the power outlet. This battery charger is for exclusive use with Battery Pack NB-7L 1.05 Ah. There is a danger of explosion if other battery packs are used. • Make sure you read this guide before using the camera. • Store this guide safely so that you can use it in the future. • Please use this manual along with the PDF manuals included on the CD-ROM p. 2. C O P Y

authorStream Live Help