TEL 355: Communication and Information Systems in Organizations :TEL 355: Communication and Information Systems in Organizations Global System for Mobile Communication (GSM) Professor John F. Clark


Evolution of Cellular Telephony :Evolution of Cellular Telephony The concept: use of low-power transmitters so that frequencies can be reused within a geographic area Originated at Bell Labs in the early 1970s First commercial service offered in the Nordic countries in 1981 Began in the U.S. in 1983 with Advanced Mobile Phone Service (AMPS) AMPS was adopted in Asia & Latin America


Analog vs. Digital :Analog vs. Digital Early cellular systems were analog Couldn’t handle growing capacity demands in a cost effective way The welcome advantages of digital technology Ease of signaling Lower levels of interference Integration of transmission and switching Increased ability to meet capacity demands


Definition of GSM :Definition of GSM GSM is a globally accepted standard for digital cellular communication It’s also the name of a standardization group founded in 1982 to create a common mobile telephone standard in Europe. This group was among the first to choose a digital standard over an analog standard Original system operated at 900 Mhz.


Development of GSM :Development of GSM The GSM standard is designed to establish compatibility among competing standards GSM group decisions and milestones: Committed to digital standard in 1985 Field tested in 1986 Chose narrowband (TDMA) system in 1987 Preoperation system set up in 1990 First commercial roll-out in 1991 Progressive coverage from cities to rural areas 1992-1995


The GSM Network :The GSM Network GSM provides recommendations only Defines functions and interfaces in detail Does not address hardware to limit developers as little as possible GSM is composed of three major systems: The switching system (SS) The base station system (BSS) The operation and support system (OSS)


The Switching System :The Switching System Performs call processing and subscriber-related functions The system includes the following functional units: Home Location Register (HLR) Mobile Services Switching Center (MSC) Visitor Location Register (VLR) Authentication Center (AUC) Equipment Identity Register (EIR)


Home Location Register :Home Location Register The HLR is the most important database Storage and management of subscriptions Permanent data includes Subscriber’s service profile Subscriber’s location information Subscriber’s activity status Subscribing to a particular provider’s service registers you in the HLR of that provider


Mobile Services Switching Center :Mobile Services Switching Center The MSC performs the telephony switching functions of the network Controls calls to and from other telephone and data systems Also performs functions such as: Toll ticketing Network interfacing Common channel signaling


Visitor Location Register :Visitor Location Register The VLR contains temporary data about visiting (roaming) subscribers It’s always integrated with the MSC When a roamer enters the service area the VLR queries the appropriate HLR If a roamer makes a call the VLR will already have the information it needs for call setup


Authentication Center :Authentication Center The AUC verifies the identity of the user and ensures the confidentiality of each call By providing authentication and encryption parameters for each call Protects network operators from fraud Assures a certain level of security for the content of each call


Equipment Identity Register :Equipment Identity Register The EIR is a database that includes info solely about the identity of mobile equipment Prevents calls from stolen, unauthorized, or defective mobile stations The AUC and the EIR can be implemented as stand-alone nodes or as a combined AUC/EIR node


The Base Station System (BBS) :The Base Station System (BBS) All radio-related functions performed in BBS The Base Station Controller (BSC) Is a high-capacity switch Provides all control functions and physical links between the MSC and the BTS A group of BSCs is served by an MSC The Base Transceiver Station (BTS) Handles the radio interface to the mobile unit Consists of tranceivers and cell antennas A group of BTSs is controlled by a BSC


Operation and Support Center :Operation and Support Center Operation and Maintenance Center (OMC) is connected with all the equipment in the switching center and to the BSC Network operation monitors and controls the system Provides centralized cost-effective support Provides a network overview at any moment Supports maintenance and operational activities for different organizations and groups


Other Functional Elements :Other Functional Elements Message Center (MXE) – handles voice, fax, and data messaging Mobile Service Node (MSN) – handles mobile intelligent network (IN) services Gateway Mobile Services Switching Center (GMSC) – an MSC with a gateway that interconnects two networks GSM Interworking Unit (GIWU) – hardware and software that enables both voice and data


GSM Network Areas :GSM Network Areas In order of increasing geographic size: Cell – the area covered by one BTS – a number of these make up a: Location Area (LA) – a group of cells – a group of LAs makes up an: MSC/VLR service area – area covered by one MSC – a number of these make up the: Public Land Mobile Network (PLMN) service area– one operator’s network


GSM Specifications :GSM Specifications Frequency range: 1,850 to 1,990 MHz Duplex distance: 80 MHz Channel separation: 200 kHz Modulation: Gaussian minimum shift keying Transmission rate: 270 kbps over the air Access method: Time Division Multiple Access Speech coder: Linear Predictive Coding (LPC) at 13 kbps – filter reduces the bit rate


GSM Subscriber Services :GSM Subscriber Services There are two basic types of service Telephony (teleservices): mainly voice services (including terminal equipment) for communicating with other subscribers – includes fax, paging, voice mail, and alphanumeric services Data (bearer services): capacity to transmit appropriate data signals between two access points creating an interface to the network


Supplementary Services :Supplementary Services The following are the usual revenue generators Call forwarding Barring outgoing calls Advice of Charge (AoC) Call hold (for telephony only) Call waiting Multiparty service (for telephony only) Calling line identification presentation/restriction Closed user groups (CUGs)