Partsavatar.Ca - Meaning of manifold absolute pressure sensor

Views:
 
Category: Others/ Misc
     
 

Presentation Description

The MAP sensor convert engine vacuum/manifold pressure to an electrical signal so the computer knows how much load the engine is below this also causes the temperatures in the burning chamber to increase and the amount of nitrogen oxides being generate in the engine to increase. Not only will your fuel economy cut, but the amount of carbon monoxide and hydrocarbon emission will increase. The emissions coming out of your tailpipe will have a lot of hydrocarbons, carbon monoxide and nitrogen oxides in them. If you are facing any above mentioned issue then you can visit us at Partsavatar.Ca

Comments

Presentation Transcript

slide 1:

Meaning of manifold absolute pressure sensor in a car and what are the symptoms The manifold absolute pressure sensor MAP sensor is single of the sensors old in an interior burning engines electronic control system. Engines that use a MAP sensor is classically fuel add. The MAP sensor convert engine vacuum/manifold pressure to an electrical signal so the computer know how much load the engine is below. This data is the base for fuel delivery and timing control. Symptoms of faulty MAP sensor: 1 Reduced Power: Rider your MAP sensor is faulty next it may wrongfully determine that the intake manifold pressure is low. This will point to to the power train control module that there is a great deal smaller engine load. As an effect the engine will have less fuel inject keen on it. This strength sound good because it will help your fuel financial system. Though your engine will not be as powerful since it doesn’t have sufficient fuel being inject into it. This also causes the temperatures in the burning chamber to increase and the amount of nitrogen oxides being generate in the engine to increase. This creates smog too. 2 Low Fuel Economy: If your MAP sensor is faulty after that it may wrongfully determine that the intake manifold pressure is high. This will point to the power train control module that there is a much bigger engine load. As a result the engine will have additional fuel injected into it. This income you’ll need to pump more fuel into the gas tank to keep up with this increased demand for fuel from your car. Not only will

slide 2:

your fuel economy cut but the amount of carbon monoxide and hydrocarbon emission will increase. These chemical mechanisms are what make up pollution. 3 Does Not Pass the Emissions Test: If you have a defective MAP sensor in your car then it will not pass an emissions test. The emissions coming out of your tailpipe will have a lot of hydrocarbons carbon monoxide and nitrogen oxides in them. If you are facing any above mentioned issue then you can visit us at Partsavatar.Ca we will diagnose and help you to fix your car’s MAP sensor.

authorStream Live Help