Knotweed Biology and Control: Knotweed Biology and Control Sasha Shaw King County Noxious Weed Program


Acknowledgements: Acknowledgements Information in this presentation is based partly on: Controlling Knotweed (Polygonum cuspidatum, P. sachalinense, P. polystachyum and hybrids) in the Pacific Northwest by Jonathan Soll, The Nature Conservancy, 1/16/2004 Control recommendations and other details have been adjusted based on current information and the field experiences of our program and others in Washington State For more details please see the original document at http://tncweeds.ucdavis.edu/esadocs/polybohe.html


Why Worry About Knotweed?: Why Worry About Knotweed? Originally planted as an ornamental in the United States and Europe but now considered one of the worst invasive plants in riparian habitats We have miles and miles of valuable riparian and wetland habitat that are vulnerable to knotweed invasion It is one of the most difficult plants to eradicate growing in some of the most sensitive habitats


Slide4: Knotweed infesting a remote area on the upper Skykomish River Knotweed


What is Knotweed?: What is Knotweed? Tall, robust plants from Asia in the buckwheat family (Polygonaceae) Japanese knotweed (Polygonum cuspidatum, Fallopia japonica, Reynoutria japonica) giant knotweed (P. sachalinense) Bohemian knotweed hybrid (P. X Bohemicum) Other common names: elephant ear bamboo false bamboo Mexican bamboo fleeceflower


Japanese Knotweed(Polygonum cuspidatum): Japanese Knotweed (Polygonum cuspidatum) Smaller than the others (6 feet usually) Leaf bases are flat, not heart-shaped Most clones in US are female (will have seeds later in season) Flower clusters are longer and more ornamental


Giant Knotweed(Polygonum sachalinense): Giant Knotweed (Polygonum sachalinense) tallest species, up to 15 feet leaves very large all with heart shaped bases flower clusters shorter most clones in US are female


Slide9: Giant knotweed in early spring with last year’s dead stems Large leaves give giant knotweed its common name elephant ear bamboo


Bohemian Knotweed(Polygonum X Bohemicum): Bohemian Knotweed (Polygonum X Bohemicum) naturally occurring hybrid between the other two most common type of knotweed found in the Pacific Northwest medium tall (8 to 12 feet), mixed leaf shapes introduced as an ornamental separately most clones were male (flower clusters stiffly upright, no seeds) recently females have been showing up with viable seeds (oh no!)


Slide11: Typical stand of Bohemian knotweed with stiffly upright male flower clusters


Slide12: Bohemian knotweed hybrid with seeds


General Knotweed Characteristics:: General Knotweed Characteristics: Large, untoothed leaves, growing alternate on stems Small white or greenish flowers grow in dense clusters from the leaf joints in July and August


Slide14: Young shoots in early spring look similar to red asparagus


Slide15: Japanese knotweed shoots emerge from rhizomes in April


Slide16: Hollow, upright, bamboo like stems often reddish or red-speckled


Slide17: Plants die back to the ground after hard frosts but hard, dry stems may persist through the winter


How Knotweed Grows: How Knotweed Grows Starts growth in April, later in colder areas Grows extremely fast during the spring Giant knotweed can reach 15 feet by late June Bohemian knotweed reaches “only” 10 feet or so Stems from deeply buried roots may emerge in late summer Young giant knotweed stems


How Knotweed Grows, cont.: How Knotweed Grows, cont. Upward growth slows in July and is much reduced after August, when most of the growth is underground Dies back to the ground with the first hard frost, and returns each spring from the same root system When knotweed is cut or damaged, it vigorously and rapidly resprouts from latent buds on root crowns and rhizomes Roots can spread 20 feet from the parent plant and go 7 feet down into the soil


Slide20: How knotweed grows and spreads (http://www.knotweed.co.uk)


How Knotweed Reproduces: How Knotweed Reproduces Seedlings occur but are uncommon Mostly reproduces by vegetative means Root and stem fragments, as small as 1/2" can form new plant colonies Cut or broken stems and roots will sprout if left on moist soil or put directly into water


How Knotweed Spreads: How Knotweed Spreads Fragments are spread by floods or high water, beavers, earth moving equipment, and in contaminated fill material Seasonal high water events and floods sweep plants into rivers and creeks, then fragment and disperse knotweed plant parts throughout the floodplains and cobble bars Roadside ditches, irrigation canals, and other water drainage systems can be colonized the same way


Knotweed Invasion on Rivers: Knotweed rapidly spreads along rivers as fragments get moved by floods and grow into new clones downriver Knotweed Invasion on Rivers


Slide24: Despite knotweed’s large rhizome mass, it provides poor erosion control


How Knotweed Takes Over: How Knotweed Takes Over Colonizes flood-scoured shores and islands and other exposed areas Emerges early in the season and quickly out-grows and shades out other plants inhibits even trees such as alder and willow understory of knotweed is usually bare of any other plants


Knotweed Control Issues: Knotweed Control Issues It’s possible but takes dedication and commitment Eradication is likely to take several years and multiple treatments Landscape level control requires long term planning and follow up Need to work from the top of the waterway down including tributaries Landscape level projects and large sites will almost certainly require integrating herbicide use into a control strategy Landscape level projects may be easier with an umbrella coordination effort such as a CWMA


Knotweed Control Issues: Knotweed Control Issues Outreach and volunteer recruitment and coordination will improve the success of large landscape level projects Reach out to all public and private landowners Educate the broader community Grants are available for invasive removal that benefits public resources especially for work done through non-profit organizations or government agencies (competitive but still worth trying!) County grants: through DNRP State grants: WSDA Knotweed Program Federal grants: US Fish and Wildlife, Forest Service Private foundations and corporations


Knotweed Control Methods: Knotweed Control Methods Manual Mechanical Shade Chemical Combination


When To Use Manual Methods: When To Use Manual Methods Easy site access Patches are small (50 stems or less) You can commit to following an intensive control regimen You don’t intend to use stem injection method since repeated cutting tends to produce numerous small stems, too small to inject


Manual Control Issues: Manual Control Issues Cutting and pulling stimulates shoot growth and depletes the roots The more shoots there are per linear foot of root, the more likely you will be to be able to physically pull the roots out, exhaust them by depriving them of energy (i.e. by cutting the shoot off) or finish them off with an herbicide treatment


Digging: Digging Dig up as much root as possible in August over at least three consecutive years Reported to work for small, isolated patches Be sure to carefully dry or dispose of the roots Do not put roots in a compost pile In England, soil contaminated with knotweed roots is considered an environmental contaminant and needs to be buried 10 feet deep Be sure to search at least 20 feet away from the original patch center


Digging knotweed up is possible but roots may go down 7 feet deep and extend out 20 feet and re-sprouting is likely: Digging knotweed up is possible but roots may go down 7 feet deep and extend out 20 feet and re-sprouting is likely


Repeated Cutting: Repeated Cutting Cut stems close to the ground TWICE A MONTH OR MORE between April and August And then cut once a month or more until the first frost Repeat treatment every year for about 5 years Try to keep plants from growing taller than 6 inches Using a mower/weed-eater is an option if set close to the ground Rake and pile up the cut stems where they will dry out, because stem fragments can root at the nodes Do not allow cut, mowed or pulled vegetation to enter waterways


Slide34: Brush cutters often the first step in tackling a large stand of knotweed


The Four T’s of Manual Control: The Four T’s of Manual Control If you do try and control knotweed manually or mechanically, be sure you practice the four T’s: be Timely Tenacious Tough and Thorough


Covering: Covering Cover with heavy duty geotextile fabric or black plastic to starve the roots Works better with isolated and smaller patches on open terrain Plan to leave the covering material in place for three to five growing seasons Try this right at the beginning of the year or after you’ve cut the plant down several times during the growing season and reduced some of the rapid plant growth


Covering: How To: Covering: How To First cut stems down to ground surface and rake away stems or stomp on them to flatten as much as possible Next cover the area with geotextile fabric or heavy duty black plastic expanding beyond the plant base and stems at least 10 feet beyond the outside stems Use heavy rocks or stake and rope down the covering material as flat as possible; avoid putting holes in the fabric and overlap sections Check fabric regularly, repair any damage and remove any emerging stems around edges


Knotweed Control: Shade Cloth: Knotweed Control: Shade Cloth Landscape fabric installed after cutting knotweed, staked and roped to secure. Note new sprouts coming up through holes.


Chemical Control: Chemical Control


General Issues: General Issues Use an herbicide product labeled for your site e.g. aquatic, non-crop/right-of-way, home and garden, pasture, forestry Follow label rates – more is not necessarily better! Always read and follow label instructions Use correct PPE At minimum: safety glasses, chemical proof gloves, long sleeves and pants, boots May need an NPDES permit from Dept of Ecology or WSDA if there is any chance of herbicide getting into water


Foliar Application: Foliar Application Can use backpack sprayer or large volume sprayer with hose Risk of drift onto desirable vegetation and into water, soil Easiest and fastest method May be appropriate for roadside and large infestations where other methods aren’t possible Expect some survival; repeat treatment for at least one to two years, possibly longer


Timing: Timing From flower bud to seeding: July through September Short plants easier to reach with spray may not have enough leaf surface to absorb and translocate enough chemical to be effective Taller plants more drift potential older plants may not be as efficient in translocating the chemicals harder to get complete coverage on tall plants Best strategy may be to cut or bend stalks and allow to regrow to 3 to 6 feet tall Usually takes about 4 weeks or more


Slide43: Foliar spray to treat knotweed re-growth Knotweed Control: Foliar Treatment


Herbicide Types: Herbicide Types Use systemic herbicide – goes from leaves to roots Glyphosate: 2 to 8 % solution Non-selective – will harm all actively growing plants if leaves are sprayed; works well combined with imazapyr Aquamaster/Rodeo plus surfactant (LI-700, Agridex) - aquatic sites Roundup Pro (has surfactant mixed in) – non aquatic sites Triclopyr: ¾ to 5% solution (lower concentrations result in better long term control, higher rates give good top kill) Selective – will not harm grass, rushes, cattails, etc Renovate – aquatic sites Garlon 3A – non-aquatic sites Imazapyr the most effective available product for long-term knotweed control slow-acting and expensive; higher risk of off-target damage also effective in combination with glyphosate Habitat – aquatic Arsenal - non-aquatic sites


Combo Method: Combo Method In spring or summer, spray or cut/bend stems followed by fall foliar spray Sets plants back so they can be sprayed at the appropriate growth stage and at the best height Cutting first instead of spraying will reduce overall herbicide input into the watershed and is probably more labor efficient can use volunteers or crews without pesticide licenses for cutting or bending


Stem Injection: Stem Injection Use stem injection gun or similar tool Also marker paint or marker and a cork for the needle Follow directions carefully especially calibration and cleaning Inject 3 to 5 ml into stem between first and second nodes or between second and third node if too woody lower down Timing best from mid-June to end of September Currently only Aquamaster has a label for injection but Roundup Pro may also have it soon


Slide47: Injecting herbicide directly into the stems of knotweed Knotweed Control: Stem Injection


Pros of Stem Injection: Pros of Stem Injection Highly effective: over 90% controlled in first year Greatly reduces drift and highly selective No cut stems to deal with


Slide49: Dead knotweed canes following treatment with stem injection gun


Cons of Stem Injection: Cons of Stem Injection Very time and labor intensive compared with foliar spraying Need to inject every cane in the stand Glyphosate label typically 2 gallons per acre so can only inject about 2500 stems per acre Can only inject stems over ½ inch so there will always be small stems that can’t be injected in a population, especially in the second year of treatment


Cut Stem/Pour Application: Cut Stem/Pour Application Similar to stem injection, may not be as effective May be good for small patches and greatly reduces drift Cut stems between lowest 2 nodes 3 ml undiluted (concentrated) glyphosate into stem cavity Can use a large needle with measured reservoir to be precise Be very careful not to splash out onto the ground Follow label directions on amount applied per acre for the 2 gallons per acre label can only inject 2500 stems/acre Timing best in late summer or early fall Need to remove cut stems away from water where they can dry out and not spread off site


Wick Wipe Method: Wick Wipe Method Uses an applicator with a sponge on the end of a reservoir for the herbicide Use glyphosate or triclopyr at 33 to 50 % concentration Greatly reduces drift Hard to get chemical on leaf surface and seems to increase personal contact with herbicide


Slide53: Applying herbicide to knotweed leaves with a wick wiper


Useful Websites: Useful Websites The Nature Conservancy Wildlands Invasive Species Website: Knotweed Page http://tncweeds.ucdavis.edu/esadocs/polybohe.html Washington State Department of Agriculture Knotweed Program http://agr.wa.gov/PlantsInsects/Weeds/Knotweed/Knotweed.htm) Stem-injection tool information and ordering http://www.jkinjectiontools.com Aquamaster label/supplemental label http://www.monsanto.com/ito/products/aquamaster.html


Info on Noxious Weeds in King County:: Info on Noxious Weeds in King County: http://kingcounty.gov/weeds Weed Photo Page: Search by Weed Name Click thumbnail picture to get more information and photos


Sasha Shaw King County Noxious Weed Program201 South Jackson St, Suite 600Seattle, WA 98104206-263-6468sasha.shaw@metrokc.govwww.kingcounty.gov/weeds : Sasha Shaw King County Noxious Weed Program 201 South Jackson St, Suite 600 Seattle, WA 98104 206-263-6468 sasha.shaw@metrokc.gov www.kingcounty.gov/weeds