Cisco ISR4451-X/K9 Datasheet

Views:
 
     
 

Presentation Description

Learn Cisco ISR4451-X Router's datasheet, including its overview, appearance, specification and FAQ.

Comments

Presentation Transcript

slide 1:

0 Cisco ISR4451-X/K9 Datasheet CISCO ISR 4000 SERIES ROUTER DATASHEET ROUTER-SWITCH.COM YEJIAN TECHNOLOGIES CO. LIMITED | HONG KONG

slide 2:

1 Content Overview ................................................................................................................................................................................ 2 Quick Specs .................................................................................................................................................................... 2 Product Details .............................................................................................................................................................. 4 The Modules Cards Licenses Accessories .................................................................................................... 9 Compare to Similar Items ...................................................................................................................................... 11 Specification ....................................................................................................................................................................... 13 Cisco ISR4451-X/K9 Specification ................................................................................................................ 13 FAQ ....................................................................................................................................................................................... 16 Source .................................................................................................................................................................................. 19 Contact Us Tel: +1-626-239-8066 USA +852-3050-1066 / +852-3174-6166 / +852-9795-4940 Hong Kong Fax: +852-3050-1066 Hong Kong Email: ciscorouter-switch.com Sales Inquiries ccie-supportrouter-switch.com CCIE Technical Support

slide 3:

2 Overview Cisco 4451 Integrated Services Router named as ISR4451-X which supports 2 Enhanced service- module SM-X slots delivers 1 Gbps to 2Gbps aggregate throughput. This router also supports two kinds of DDRM data plane and control/services plane which make administrator easy to manage the router. Quick Specs Figure 1 shows the appearance of Cisco ISR4451-X/K9.

slide 4:

3 Table 1 shows the Quick Specs. Product Code Cisco ISR4451-X/K9 Aggregate Throughput 1 Gbps to 2Gbps Total onboard WAN or LAN 10/100/1000 ports 4 RJ-45-based ports 4 SFP-based ports 4 Enhanced service-module SM-X slot 2 NIM Network Interface Modules slots 3 Onboard ISC slot 1 DDRM data plane 2 GB default / 2 GB maximum DDRM control/services plane 4 GB default / 16 GB maximum Flash Memory 8 GB default / 32 GB maximum Power-supply options Internal: AC DC roadmap and PoE Rack height 2 RU Dimensions H x W x D 88.9 x 438.15 x 469.9 mm

slide 5:

4 Product Details Figure 2 shows the front panel of Cisco ISR4451-X/K9. Note: ① AC power supply unit PSU0 ④ Router power On/Off switch ② Router fan tray ⑤ LEDs ③ AC power supply unit PSU1 ·Router fan tray is hidden behind removable bezel. ·LEDs include 12 indicators.

slide 6:

5 Table 2 shows the LED descriptions. LEDs Represents Color Description PSU Power Supply Unit P0 and P1 Status Green PSU is on and is providing power. Amber PSU is on but with errors or in a failure condition. Off Power supply is turned off. GE POE Internal PoE Daughter Card Status Green PSU is installed and providing power Amber PSU is installed but in a failure condition. Off PSU is off. FLASH System Flash Status Blinking Green Compact flash/eUSB flash is present and currently being accessed. TEMP Temperature Status Solid green All temperature sensors in the system are within acceptable range. Amber One or more temperature sensors in the system are outside the acceptable range. Off Temperature is not being monitored. PWR System Power Green System power is on and functioning correctly.

slide 7:

6 LEDs Represents Color Description Green blinking System power is in the process of shutting down. Amber System power is up but low level initialization failed. Amber blinking System power is up but the system failed to come out of reset. Off System power is off. POE BOOST Power Over Ethernet Boost Mode Green Two PoE power supplies are installed and operating in boost mode. Off This can mean one of the following: ·No PoE PSU installed. ·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode. ISC ISC Slot Status Green PVDM4 is present and enabled. Amber Initialized with error.

slide 8:

7 LEDs Represents Color Description Off Not present. FAN Fan Status Green All fans are operating. Amber One fan has stopped working. Blinking Amber Two or more fans have stopped working or the fan tray has been removed. Off Fans are not being monitored. STAT System Status Solid green System operating normally. Blinking amber BIOS/Rommon is booting. Amber BIOS/Rommon has completed booting and system is at Rommon prompt or booting platform software. Off System is not out of reset or BIOS image is not loadable.

slide 9:

8 Figure 3 shows the back panel of Cisco ISR4451-X/K9. Note: ① USB Type A port ⑤ Auxiliary port ② GE management port ⑥ GE Ports ③ USB Type B mini port ⑦ NIM Slots ④ Console port ⑧ SM-X Slot ·The NIMs support 2 single-wide or 1 double-wide. ·The GE Ports include 4 RJ45 ports and 4 SFP ports.

slide 10:

9 The Modules Cards Licenses Accessories Cisco ISR4451-X/K9 is one of the Cisco 4000 series routers which support new modules cards slots such as NIM ISC etc. Besides Cisco ISR4451-X/K9 can upgrade by licenses. Table 3 shows some recommended modules cards licenses and several cables. Items Models Descriptions Smart Serial Cables CAB-SS-449FC Cisco CAB-SS-449FC RS-449 Cable DCE Female to Smart Serial 10 Feet CAB-SS-V35FC Cisco CAB-SS-V35FC V.35 Cable DCE Female to Smart Serial 10 Feet Console and Auxillary Cables CAB-AUX-RJ45 Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M CAB-ETH-S-RJ45 Cisco Router Cable CAB-ETH-S-RJ45 CAB-CONSOLE-RJ45 Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F CAB-CONSOLE-USB Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B

slide 11:

10 Items Models Descriptions Licenses L-SL-44-APP-K9 Cisco ISR 4431/4451 AppX license L-SL-44-APP- K9 with WAAS/vWAAS 1300/2500 conns RTU Network Interface Modules NIM-1MFT-T1/E1 Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module NIM-2CE1T1-PRI Cisco Multiflex Trunk Voice and WAN network interface module NIM-4E/M Analog voice network interface card ear and mouth NIM-2FXS Cisco Analog voice network interface card NIM- 2FXS NIM-2FXS/4FXO Cisco Analog voice network interface card NIM- 2FXS/4FXO NIM-8MFT-T1/E1 Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module SFPs for On-Board GE Ports GLC-SX-MMD Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module MMF/SMF 1310nm DOM

slide 12:

11 Items Models Descriptions GLC-LH-SMD Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module SMF 1550nm DOM GLC-ZX-SMD Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module MMF 850nm DOM Compare to Similar Items Models ISR4451-X/K9 ISR4431/K9 ISR4351/K9 ISR4331/K9 ISR4321/K9 Aggregate Throughput 1 Gbps to 2 Gbps 500 Mbps to 1 Gbps 200 Mbps to 400 Mbps 100 Mbps to 300 Mbps 50 Mbps to 100 Mbps Total onboard WAN or LAN 10/100/1000 ports 4 4 3 3 2 RJ-45-based ports 4 4 3 2 2 SFP-based ports 4 4 3 2 1

slide 13:

12 Models ISR4451-X/K9 ISR4431/K9 ISR4351/K9 ISR4331/K9 ISR4321/K9 Enhanced service-module slots 2 0 2 1 0 NIM slots 3 3 3 2 2 Onboard ISC slot 1 1 1 1 1 Rack height 2 1 2 1 1

slide 14:

13 Specification Cisco ISR4451-X/K9 Specification Aggregate Throughput 1 Gbps to 2Gbps Total onboard WAN or LAN 10/100/1000 ports 4 RJ-45-based ports 4 SFP-based ports 4 Enhanced service-module slots 2 Doublewide service-module slots 1 assumes no singlewide SM-X modules installed NIM slots 3 OIR all I/O modules Yes Onboard ISC slot 1 Default memory double-data-rate 3 DDR3 error- correction-code ECC DRAM Combined control/services/data planes NA Maximum memory DDR3 ECC DRAM Combined control/services/data planes NA

slide 15:

14 Cisco ISR4451-X/K9 Specification Default memory DDR3 ECC DRAM data plane 2 GB Maximum memory DDR3 ECC DRAM data plane 2 GB Default memory DDR3 ECC DRAM control/services plane 4 GB Maximum memory DDR3 ECC DRAM control/services plane 16 GB Default flash memory 8 GB Maximum flash memory 32 GB External USB 2.0 slots type A 2 USB console port -type B mini up to 115.2 kbps 1 Serial console port - RJ45 up to 115.2 kbps 1 Serial auxiliary port - RJ45 up to 115.2 kbps 1 Power-supply options Internal: AC DC and PoE Redundant power supply Internal: AC DC and PoE AC input voltage 100 to 240 VAC autoranging AC input frequency 47 to 63 Hz AC input current range AC power supply maximum 7.1 to 3.0A

slide 16:

15 Cisco ISR4451-X/K9 Specification AC input surge current 50 A Typical power no modules watts 158 Maximum power with AC power supply watts 450 no PoE Maximum power with PoE power supply platform only watts 1000 with PoE redundant 1450 with PoE boost no redundancy Maximum endpoint PoE power available from PoE power supply watts 500 W with optional redundancy Maximum endpoint PoE power capacity with PoE boost watts 950 W no redundancy

slide 17:

16 FAQ Q: Where do I position the Cisco 4451-X in comparison to the Cisco 3900 Series ISRs and the ASR 1000 Series Aggregation Services Routers A: The Cisco 4451-X is positioned for high-end enterprise branch offices or enterprise headend where there is a performance requirement of 1 to 2 Gbps with services. Performance-wise the Cisco 4451-X is positioned between the 3945E ISR and the ASR 1001. Q: How many dual inline memory modules DIMMs does the Cisco ISR4451-X/K9 have A: The Cisco ISR4451-X/K9 have three DIMM slots. Two slots are used for control-plane and one slot for data-plane memory. Q: What type of backplane is used between components in the Cisco ISR4451-X/K9 A: The 4000 Series uses multigigabit fabric MGF for Layer 2 connectivity between the modules. On the 4451-X the MGF can provide either 2 Gbps to all NIM slots or up to 10 Gbps to all SM-X slots. The MGF is completely nonblocking and can forward in excess of 50 Gbps. Q: Is the Cisco ISR4451-X/K9 power supply field-replaceable units FRUs

slide 18:

17 A: Yes. The power supply can be replaced in the field. Q: Is the Cisco ISR4451-X/K9 power supply hot-swappable A: Yes. You do not need to power down the chassis to insert or remove a power supply. Also unlike the 3900 Series ISRs the bezel and fan tray can remain in place while a power supply is replaced. Q: What are the power options for PoE on the Cisco ISR4451-X/K9 A: The Cisco ISR4451-X/K9 has two PoE options. Two of the FPGE interfaces can be powered with the addition of a dedicated power-conversion module installed into the system PWR-GE-POE- 4400. This module does not require a higher-capacity system power supply and will work with the default power supply. The PoE power for the FPGE ports is completely independent from PoE power to the rest of the system. Q: What is the difference between PoE Redundancy mode and PoE Boost mode A: Both modes require that two power supplies be installed in the Cisco 4451-X or 4431. Redundancy mode provides backup PoE power to the chassis full PoE power will be available in the event of a single power supply failure. PoE Boost mode provides double available PoE power—the maximum

slide 19:

18 amount of power from both power supplies combined—meaning that if a single power supply fails the second redundant power supply will be cut in half. Q: With redundant power supplies can we switch the power to primary when it fails and the router is running on the secondary power supply A: There is no concept of primary or secondary power supply for the Cisco 4451-X and 4351. The power supplies are simply redundant so that when one fails the other power-supply unit PSU takes over by transparently providing power to the entire system. No switching or intervention is required. Both share the load when running in the system however when one fails the other provides power to the complete unit. When the failed PSU is replaced with a new PSU in the system the two power supplies are redundant. Q: Can the Cisco 4000 Series ISRs handle the failure of a fan A: Yes for systems with multiple fans 4331 and above. A fully loaded system will function normally below 6000 feet 1.82 km with a single fan failure. If the ISR is above 6000 feet and in 32ºF or 0ºC temperatures it may shut down because of overheating. The system is rated to operate in 32ºF temperatures at up to 10000 feet 3.05 km.

slide 20:

19 Failure of a power-supply fan will likely result in overheating and shutdown of the power supply. If power redundancy is required you should install two power supplies in a 4451-X or 4431. Q: Is a console port available on the Cisco 4000 Series A: The Cisco 4000 Series has the option of the regular RJ-45 console port as well as the USB console port. As with the ISR G2 routers only one console port can be used at a time with preference given to the USB console port. The Cisco 4221 router has a combo RJ-45 port for AUX and Console. Source http://www.router-switch.com/cisco-isr4451-x-k9-p-5293.html

authorStream Live Help