CISCO1941-K9 Overview

Views:
 
     
 

Presentation Description

The Cisco 1941 Router, modular router, is designed for branch offices. CISCO1941/K9 is the basic model of Cisco 1941 Series. This PDF includes overview, hardware description, specifications and FAQ of CISCO1941/K9.

Comments

Presentation Transcript

slide 1:

0 CISCO1941/K9 Overview 2017 CISCO 1900 SERIES ROUTER DATASHEET ROUTER-SWITCH.COM ROUTER SWITCH LIMITED | Hong Kong China

slide 2:

1 Content Overview ................................................................................................................................................................................ 2 Quick Specs .................................................................................................................................................................... 2 Product Details .............................................................................................................................................................. 3 Modularity Features .................................................................................................................................................... 9 The Licenses ................................................................................................................................................................ 11 Compare to Similar Routers .................................................................................................................................. 11 Specification ....................................................................................................................................................................... 12 FAQ ....................................................................................................................................................................................... 18 Source .................................................................................................................................................................................. 22 Contact Us Tel: +1-626-239-8066 USA +852-3050-1066 / +852-3174-6166 / +852-9795-4940 Hong Kong Fax: +852-3050-1066 Hong Kong Email: ciscorouter-switch.com Sales Inquiries ccie-supportrouter-switch.com CCIE Technical Support

slide 3:

2 Overview The Cisco 1941 Router modular router is designed for branch offices. Quick Specs Figure 1 shows the front view of CISCO1941/K9. Table 1 shows the Quick Specs of the CISCO1941/K9. Product Code CISCO1941/K9 Rack Units 2 RU

slide 4:

3 Interfaces 2 integrated 10/100/1000 Ethernet ports: GE0/0GE0/1 Expansion Slots 2 enhanced High-Speed WAN Interface Card slots 1 Internal Services Module slot RAM 512 MB installed / 2.5 GB max Flash Memory 256 MB installed / 8 GB max Dimensions 34.3 cm x 29.2 cm x 8.9 cm Package Weight 10.48 Kg Product Details Figure 2 shows the statue LEDs on the front panel of the 1941/K9 including three statues: SYS ACT and PoE.

slide 5:

4 Table 2 shows the front panel LEDs area description. LED Color Description SYS Solid green Solid green indicates normal operation. Blinking green System is booting or is in ROM monitor mode. Amber System error. Off Power is off or system board is faulty.

slide 6:

5 LED Color Description ACT Green Solid or blinking when any packets are transmitted or received on any WAN or LAN or when monitoring system activity. PoE Green PoE is available. Amber Power supply is not supplying PoE power. Figure 3 shows the back panel of this router with LEDs. Note:

slide 7:

6 ① Kensington security slot ⑤ EN Enable USB console ② CF 1 ⑥ EN Enable RJ-45 console ③ CF 0 ⑦ S Speed ④ ISM or WLAN ⑧ L Link Table 3 shows the back LEDs area description. LED Color Description Location CF 1 Green Flash memory is busy. Back Panel Amber Initialized with error. Blinking Green then turns off CompactFlash is ready for removal. CF 0 Green Flash memory is busy. Back Panel Amber Initialized with error. Blinking Green then turns off CompactFlash is ready for removal. S Speed 1 blink + pause GE port operating at 10 Mb/s. Back Panel 2 blink + pause GE port operating at 100 Mb/s. 3 blink + pause GE port operating at 1000 Mb/s. L Link Green GE link is established. Back Panel Off No GE link is established.

slide 8:

7 LED Color Description Location EN RJ-45 console port Green The RJ-45 console port is active. Back Panel EN USB serial console port Green The USB console port is active. Back Panel Figure 4 shows the ports and slots on the back panel of CISCO1941/K9. Note: ① On/Off switch ⑦ Compact flash 2 ② HWIC slot 1 ⑧ HWIC slot 2 ③ Input power connector ⑨ USB serial port

slide 9:

8 ④ AUX port ⑩ GE 0/1 ⑤ GE 0/0 ⑪ USB ports ⑥ Compact flash 1 ·Cisco 1941/K9 supports 2 integrated EHWIC slots for flexible configurations. It supports two modules: 1 double wide HWIC-D or single wide EHWIC/HWIC module or a 2nd single wide E-HIC/HWIC module. ·2 high-speed USB 2.0 ports enable another mechanism secure token capabilities and storage. ·The 1941 has 2 external Compact Flash slots supporting to extend up to 8GB. Figure 5 shows the internal view of the CISCO1941/K9. There is a blank Memory slot inside the device supporting to extend memory.

slide 10:

9 Modularity Features The Cisco 1941 provides significantly enhanced modular capabilities offering investment protection for customers.

slide 11:

10 Table 4 shows interfaces and modules for this router. Models Description ISM-SRE-300-K9 Internal Services Module ISM with Services Ready Engine MEM-CF-256U1GB 256MB to 1GB Compact Flash Upgrade for Cisco 190029003900 MEM-CF-256U2GB 256MB to 2GB Compact Flash Upgrade for Cisco 190029003900 MEM-CF- 256U512MB 256MB to 512MB CF Upgrade for Cisco 190029003900 ISR MEM-CF-256U4GB 256MB to 4GB Compact Flash Upgrade for Cisco 190029003900 EHWIC-1GE-SFP-CU Cisco 1900 2900 3900 Router EHWIC WAN Card EHWIC-1GE-SFP-CU EHWIC-4ESG Four port 10/100/1000 Base-TX Gigabit Ethernet switch interface card for Cisco 1900 2900 3900 Routers HWIC-2FE HWIC two routed port Cisco Router High-Speed WAN Interface card HWIC-1T 1-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card HWIC-2T 2-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card VWIC3-1MFT-T1/E1 Cisco Voice/WAN Card VWIC3-1MFT-T1/E1 VWIC3-2MFT-T1/E1 Cisco Voice/WAN Card VWIC3-2MFT-T1/E1 VWIC3-1MFT-G703 Cisco VoiceWAN T1/E1 interface moudle VWIC3-1MFT-G703

slide 12:

11 Models Description VWIC3-2MFT-G703 Cisco Voice/WAN Card VWIC3-2MFT-G703 The Licenses The Cisco 1941/K9 router supports IOS Technology Package Licenses. Table 5 shows the models of these licenses. Licenses Description L-SL-19-DATA-K9 Cisco 1900 IOS License L-SL-19-DATA-K9 Data E-Delivery PAK for Cisco 1900 L-SL-19-SEC-K9 Security License for Cisco 1900 L-SL-19-APP-K9 AppX License with DATA and WAAS for Cisco 1900 Series Compare to Similar Routers Table 6 shows the comparison between Cisco 1921 router and 1941 router. Model CISCO1921/K9 CISCO1941/K9 Interface w/2 GE 2 GE EHWIC slot 2 2

slide 13:

12 ISM Slot 0 1 Memory 512 MB installed / 512 MB max 512 MB installed / 2 GB max Flash Memory 256 MB installed / 256 MB max 256 MB installed / 8 GB max Rack Unit 1U 2U Specification CISCO1941/K9 Specification Main Specs Manufacturer Cisco Systems Inc Manufacturer Part Number CISCO1941/K9 Product Type Router Form Factor External - modular - 2U Dimensions WxDxH 34.3 cm x 29.2 cm x 8.9 cm Weight 5.8 kg DRAM Memory 512 MB installed / 2 GB max Flash Memory 256 MB installed / 8 GB max

slide 14:

13 Routing Protocol OSPF IS-IS BGP EIGRP DVMRP PIM-SM IGMPv3 GRE PIM-SSM static IPv4 routing static IPv6 routing Data Link Protocol Ethernet Fast Ethernet Gigabit Ethernet Network / Transport Protocol IPSec Remote Management Protocol SNMP RMON Features Cisco IOS IP Base firewall protection VPN support MPLS support Syslog support IPv6 support Class- Based Weighted Fair Queuing CBWFQ Weighted Random Early Detection WRED Compliant Standards IEEE 802.3ah IEEE 802.1ah IEEE 802.1ag Power AC 120/230 V 50/60 Hz Services and Slot Density Embedded hardware-based crypto acceleration IPSec + SSL Yes Total Onboard LAN 10/100/1000 2 RJ-45-Based Ports 2 SFP-Based Ports 0

slide 15:

14 SM Slots 0 Double-Wide SM Slots 0 EHWIC Slots 2 Double-Wide EHWIC slots use of a double-wide EHWIC slot will consume two EHWIC slots 1 ISM Slots 1 0 on the Cisco 1941W Memory DDR2 Error Correction Code ECC ECC DRAM - Default 512 MB Memory DDR2 ECC DRAM - Maximum 2.0 GB Compact Flash external - Default slot 0: 256 MB slot 1: none Compact Flash external - Maximum slot 0: 4 GB slot 1: 4 GB External USB flash memory slots Type A 2 USB Console Port Type B up to 115.2 kbps 1 Serial Console Port up to 115.2 kbps 1 Serial Auxiliary Port up to 115.2 kbps 1

slide 16:

15 Power Supply Options AC POE Redundant Power Supply Support No Power Specifications AC Input Voltage 100-240 V AC Input Frequency 47-63 Hz AC Input Current range AC Power Supply Max Amps 1.5-0.6 AC Input Surge Current 50 A Typical Power No Modules 35 W Maximum Power capacity with AC power supply 110 W Maximum Power capacity with PoE power supply platform only 110 W Maximum PoE device power capacity with PoE power supply 80 W Physical Specifications Dimensions H x W x D 3.5 in x 13.5 in x 11.5 in 34.3 cm x 29.2 cm x 8.9 cm Rack Height 2 RU Rack-mount 19in. 48.3 cm EIA Included

slide 17:

16 Wall-mount refer to installation guide for approved orientation Yes Package Weight 23.1 lbs 10.48 Kg Weight-with AC power supply no modules 12 lbs5.44 Kg Weight-with POE power supply no modules 12.8 lbs 5.8 Kg Maximum Weight-Fully Configured 14 lbs 6.35 Kg Airflow Front to Side Environmental Specifications Operating Condition Temperature-5906 feet 1800 m max. altitude 0-40°C 32-104°F Temperature-9843 feet 3000 m max. altitude 0-25°C 32-77°F Altitude 3000 m 10000 ft Humidity 10 to 85 RH Acoustic: Sound Pressure Typ/Max 26/46 dBA Acoustic: Sound Power Typ/Max 36/55 dBA Transportation/Storage Condition Temperature -40 - 70 oC -40 - 158 oF

slide 18:

17 Humidity 5 to 95RH Altitude 4570m 15000 ft Regulatory Compliance Safety UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 EMC 47 CFR Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI V-3 CNS 13438 EN 300-386 EN 61000 Immunity EN 55024 CISPR 24

slide 19:

18 EN50082-1 Telecom TIA/EIA/IS-968 CS-03 ANSI T1.101 ITU-T G.823 G.824 IEEE 802.3 RTTE Directive FAQ Q: Which CISCO router is suitable as gateway router for medium size organization of about 80 client computers connected to the internet A: Cisco1900 Series Router is OK. Q: 1941/K9 that I would wish to make to support for VPN A: That depends if you want to setup IPSec VPN you would need SL-19-SEC-K9 or L-SL-19-SEC-K9 license if you want to use SSL VPN you should buy a FL-SSLVPN-K9 the number depends on your SSL users.

slide 20:

19 Q: I am looking at the pictures of Cisco1941-k9 but on the back of the router I dont see a Fiber input from my ISP Provider and Fiber output for my switch. Well this is what I am going to get from my ISP. They will provide me a dedicated internet connection with a Fiber cable into my office. And it will be Internet only or data only. So input in router will be Fiber and output from router should also be Fiber to my switch. A: Do not worry HWIC-1GE-SFP GigE High Speed WIC with One SFP Slot and EHWIC-1GE-SFP-CU are designed for your problem. They can add SFP ports to 1900 2900 3900 Series Routers. Q: I bought a 1941W but I bought it with just IPBASE license and now in need of the securityk9 and SSL VPN for it. I just want to confirm that what I’m purchasing is for an IOS with payload encryption. I’m just looking for SSL for up to 10 users. A: SL-19-SEC-K9 FL-SSLVPN10-K9 are either needed. Q: In site to site VPN we know both end IP address we assigned set peer cmd. If the interface is configured with DHCPISP we dont know the interface IP address. At this scenario how to configure site to site VPN. In remote VPN how to configure remote VPN in cisco router. How to provide IP address dynamically to client host. A: Dont know if it can be used with a single site-to-site VPN but DMVPN can use NHRP to support non-hub with dynamic tunnel IPs. The client is configured with a hubs IP and it uses NHRP to register its public IP with the hub. The hub then "knows" the remote IP. NB: it also supports the remote IP being changed.

slide 21:

20 Q: What is the basic setup required to configure 3 ISPs on a router interface A: I would say that these are the basic steps for setting up 3 ISP on a single router. - decide which interface will be for which ISP. - obtain IP addressing information from each ISP. - configure appropriate IP address and subnet mask on each of the ISP interfaces. - configure address translation for each of the 3 ISP interfaces. - determine what approach you will use for routing. Will it be static routes or some dynamic routing protocol or some mix of these - implement the appropriate routing solution for each of the ISP. Q: We are receiving low internet upload speed 6-8Mps at our office location. The download speed is good 50Mbps. A: Got in contact with the ISP Comcast and tried testing it bypassing our internal n/w i.e. connecting my laptop directly to Cienna Comcast GW and both speeds were around 50Mbps. Testing the same through my router the speed goes down. Just the Upload speed. Could there be a configuration in our router that causing this FYI on the internet interface the settings are Duplex full Speed auto Clear the counters and change the speed and duplex to auto/auto. Q: We are looking to put Cisco routers into some client sites. Was looking at 1841s but they are end of life now I believed can someone recommend an alternative / or its replacement A: The 1941 is the successor to the 1841. However new devices are faster so you might be able to "downsize". For example an 1841 is rated at 75 Kpps while an 890 is rated at 100 Kpps. Conversely many new WAN circuits provide

slide 22:

21 much more bandwidth then we usually obtained via TDM. If using such you might need the faster successor or even a faster device. In other words you may want to re-examine your needs rather than just using a successor platform because its the successor platform. Q: If I purchased a Cisco ISR G2 router on Cisco IOS Software Release 15.01 M before the limitation was imposed what should I do And should I need to upgrade my Cisco IOS Software A: Assuming that you already have purchased the securityk9 package for encryption you must purchase a HSEC-K9 license as a spare. Q: Why do I need to purchase the SEC-K9 license as a spare A: If you purchase a Cisco ISR G2 chassis and later decide to turn on security features you must buy a SEC-K9 license. The administrator must download the license to the router and follow the license installation instructions that come with the license to be able to use the security features on the router. Q: On the Cisco ISR G2 routers with the SEC-K9 license what tunnel count and performance throughput are available A: The SEC-K9 permanent licenses apply to the Cisco 1900 2900 and 3900 ISR G2 platforms these licenses limit all encrypted tunnel counts to 225 tunnels maximum for IP Security IPsec Secure Sockets Layer VPN SSL VPN a secure time-division multiplexing TDM gateway and secure Cisco Unified Border Element CUBE and 1000 tunnels

slide 23:

22 for Transport Layer Security TLS sessions. The SEC-K9 license limits encrypted throughput to less than or equal to 85-Mbps unidirectional traffic in or out of the ISR G2 router with a bidirectional total of 170 Mbps. This requirement applies for the Cisco 1900 2900 and 3900 ISR G2 platforms. Q: What countries are classified license-free zones A: Countries belonging to the EU license-free zone include Australia Austria Belgium Bulgaria Canada Cypress Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Japan Latvia Lithuania Luxembourg Malta Netherlands New Zealand Norway Poland Portugal Romania Slovakia Slovenia Spain Sweden Switzerland Turkey United Kingdom and the United States. Source http://www.router-switch.com/cisco1941-k9-p-148.html

authorStream Live Help