Cisco ISR One- and 2-Port Serial and Asynchronous High-Speed WAN Inter

Views:
 
     
 

Presentation Description

Cisco ISR EHWIC Cards datasheet, including overview, appearance, specifications, ordering information of this series.

Comments

Presentation Transcript

slide 1:

ROUTER-SWITCH.COM Leading Network Hardware Supplier CISCO ISR ONE- AND 2-PORT SERIAL AND ASYNCHRONOUS HIGH-SPEED WAN INTERFACE CARDS DATASHEET

slide 2:

ROUTER-SWITCH.COM 1 CONTENT Overview ..................................................................................................... 2 Features ...................................................................................................... 2 Supported Platforms and Quantities ...................................................................... 5 Connectors and Cabling .................................................................................... 5 Specifications ................................................................................................ 6 Ordering Information ...................................................................................... 10 Sources ...................................................................................................... 10 Contact Us Tel: +1-626-239-8066 USA +852-3050-1066 / +852-3174-6166 / +852-9795-4940 Hong Kong Fax: +852-3050-1066 Hong Kong Email: ciscorouter-switch.com Sales Inquiries ccie-supportrouter-switch.com CCIE Technical Support

slide 3:

ROUTER-SWITCH.COM 2 OVERVIEW Serial and asynchronous high-speed WAN interface cards HWICs provide highly flexible connections for Cisco ® 1800 1900 2800 2900 3800 and 3900 Series Integrated Services Routers. These HWICs help customers enable applications such as WAN access legacy protocol transport console server and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management external dial- modem access low-density WAN aggregation legacy protocol transport and high-port-density support. Cisco offers four new serial and asynchronous HWICs: • Cisco 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card HWIC-1DSU-T1 • Cisco 1-Port Serial WAN Interface Card HWIC-1T • Cisco 2-Port Serial WAN Interface Card HWIC-2T • Cisco 2-Port Asynchronous/Synchronous Serial WAN Interface Card HWIC-2A/S FEATURES Figure 1. Cisco 1- and 2-Port Serial and Asynchronous HWICs Common Applications These highly flexible interface cards facilitate several important applications: • WAN access and aggregation

slide 4:

ROUTER-SWITCH.COM 3 • Legacy protocol transport • Dial access server WAN Access and Aggregation Serial interfaces can be used to provide WAN access for remote sites. With support for serial speeds up to 8 Mbps per port the 2-port serial HWIC is ideal for low- and medium-density WAN aggregation Figure 2. The HWIC-1DSU-T1 also offers an integrated CSU/DSU simplifying configuration and management. Integration allows management of the router and CSU/DSU as a single SNMP entity while also providing detailed troubleshooting capabilities. Troubleshooting features include self- test loopbacks CSU/DSU reset alarm counters and T1 statistics. Figure 2. WAN Concentration

slide 5:

ROUTER-SWITCH.COM 4 Legacy Protocol Transport Serial and synchronous/asynchronous ports are ideally suited to transport legacy traffic across a TCP/IP network facilitating network convergence Figure 3 and eliminating costly separate leased lines for this traffic. Legacy protocols supported by Cisco IOS ® Software include: • Systems Network Architecture SNA and Synchronous Data Link Control SDLC Protocol • Binary Synchronous Communications Protocol Bisync • X.25 Protocol Figure 3. Dial Access Server Dial Access Server Asynchronous HWICs can connect to external dial modems to provide low-density dial access servers Figure 4. Figure 4. Network Convergence

slide 6:

ROUTER-SWITCH.COM 5 SUPPORTED PLATFORMS AND QUANTITIES Platforms HWIC-1T HWIC-1DSU-T1 HWIC-2T HWIC-2A/S Cisco 1841 2 2 2 2 Cisco 1861 No No No No Cisco 1941 2 2 2 2 Cisco 2801 2 2 2 2 Cisco 2811 2821 2851 4 4 4 4 Cisco 2901 2911 2921 2951 4 4 4 4 Cisco 3825 and 3845 4 4 4 4 Cisco 3925 and 3945 4 4 4 4 CONNECTORS AND CABLING Smart Serial Cabling The HWIC-1T HWIC-2T and HWIC-2A/S use Cisco Smart Serial connectors. The supported cables are noted in Table 3. The HWIC-1DSU-T1 uses a RJ-45 connector. Smart Serial Cabling for HWIC-1T HWIC-2T and HWIC-2A/S Product Number Cable Type Length Connector Type CAB-SS-V35MT V.35 DTE 10 ft 3m Male CAB-SS-V35FC V.35 DCE 10 ft 3m Female CAB-SS-232MT EIA/TIA-232 DTE 10 ft 3m Male

slide 7:

ROUTER-SWITCH.COM 6 CAB-SS-232FC EIA/TIA-232 DCE 10 ft 3m Female CAB-SS-449MT EIA/TIA-449 DTE 10 ft 3m Male CAB-SS-449FC EIA/TIA-449 DCE 10 ft 3m Female CAB-SS-X21MT X.21 DTE 10 ft 3m Male CAB-SS-X21FC X.21 DCE 10 ft 3m Female CAB-SS-530MT EIA/TIA-530 DTE 10 ft 3m Male CAB-SS-530AMT EIA/TIA-530A DTE 10 ft 3m Male SPECIFICATIONS HWIC Signaling and Telecom Specifications Specification HWIC-1DSU-T1 HWIC-1T HWIC-2T HWIC-2A/S Synchronous Support Yes Yes Yes Yes Synchronous Maximum Speed Per Port 1.544 Mbps 8 Mbps 8 Mbps 128 kbps Asynchronous Support No Yes Yes Yes Asynchronous Maximum Speed Per Port - 115.2 kbps 115.2 kbps 115.2 kbps Bisync Support No Yes Yes Yes

slide 8:

ROUTER-SWITCH.COM 7 Serial Protocols - EIA-232 EIA-449 EIA-530 EIA-530A V.35 and X.21 EIA-232 EIA- 449 EIA-530 EIA-530A V.35 and X.21 EIA-232 EIA- 449 EIA-530 EIA-530A V.35 and X.21 Network Clock Synchronization Yes Yes Yes Yes NEBS Type 1/3 Type 2/4 Type 2/4 Type 2/4 TelecommPTT • TIA-968-A • Industry Canada CS-03 Part II • JATE Digital • ID0002 • HK2017 • NEBS • TBR1 and 2 • JATE Digital • NEBS • TBR1 and 2 • JATE Digital • NEBS • TBR1 and 2 • JATE Digital • NEBS

slide 9:

ROUTER-SWITCH.COM 8 Specifications unique to Cisco 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card HWIC-1DSU-T1 Specification Data Network Interface Specifications • Transmit bit rate: 1.544 Mbps +/- 50 bps • Receive bit rate: 1.544 Mbps +/- 100 bps • Line code: AMI B8ZS • AMI ones density • Forced/bit robbing N X56 • High-Level Data Link Control HDLC data inversion N X64 • Framing format: D4 SF and DSF • Output level LBO 0 -7.5 or -15 dB DSU 0-655 feet • Input level: +1 dB0 to -24 dB0 Recognized BERT Test Patterns 1:2 1:5 1:8 3:24 QRW all 0s all 1s and user- programmable 24-bit patterns Homologation Specifications for the HWIC-1DSU-T1 HWIC-T1 HWIC-2T and HWIC-2A/S Specification Data Safety Approvals • UL 60950 United States • CAN/CSA 22.2 CSA60950 Canada • GB 4943 China • AS/NZS 60950 Australia/New Zealand • EN60950 Europe • IEC 60950 International Immunity • EN300386 • CISPR24 • EN55024 • EN50082-1 • 61000-4-2/3/4/5/6/8/11

slide 10:

ROUTER-SWITCH.COM 9 Emissions • FCC Part 15 Class A • ICES-003 Class A • EN55022 Class A • CISPR22 Class A • AS/NZSCISPR22 Class A • VCCI Class A • EN 300386 • EN61000-3-2/3 • CNS13438 Physical Specifications • Singlewide HWIC no slot restrictions • Dimensions H x W x D 0.8 x 3.1 x 5.6 in. 2.1 x 7.9 x 14.2 cm Environmental Specifications • Operating temperature: 32 to 104°F 0 to 40°C • NEBS short-term operating temperature: 32 to 131°F 0 to 50°C • Storage temperature: -4 to 149°F -20 to 65°C • Relative humidity: 10 to 90 noncondensing

slide 11:

ROUTER-SWITCH.COM 10 ORDERING INFORMATION Part Number Description HWIC-1DSU-T1 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card HWIC-1T 1-Port Serial WAN Interface Card HWIC-2T 2-Port Serial WAN Interface Card HWIC-2A/S 2-Port Async/Sync Serial WAN Interface Card SOURCES https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan- interface-cards/datasheet_c78-491363.html

authorStream Live Help