6 01 T P Analog Systems

Views:
 
Category: Education
     
 

Presentation Description

No description available.

Comments

Presentation Transcript

Slide1: 

ANALOG SYSTEMS

Slide2: 

ANALOG TELEPHONES

Slide3: 

TA-312/TT Ruggedized Outside Desk or Wall Mounted Manual or Automatic Switchboards

Slide5: 

Modes of Operation Common Battery Local Battery Common Battery Signaling

Slide6: 

Power Requirements 3V DC 2 BA- 3030’s

Slide7: 

Signaling 20 Hz, RDL

Slide8: 

TA-838/TT Ruggedized Solid State Outside Desk or Wall Mounted Automatic Switchboards

Slide10: 

Modes Of Operation Has 7 Modes of Operation 2 Modes are TWO Wire 5 Modes are FOUR Wire

Slide11: 

When in the Four Wire Mode of Operation, the TA-838/TT is capable of accepting AC or DC Incoming Ringing Signaling Modes Of Operation

Slide12: 

= 4 Wire AC/LB AC/CB DC/LB DC/CB PT/PT Modes Of Operation

Slide13: 

Modes Of Operation of TA-838/TT = 2 Wire DC/LB DC/CB

Slide14: 

Power Sources Requires Four BA-3042s when mode of operation is set in 2 Wire DC/LB or 4 Wire DC/LB, AC/LB and PT-PT

Slide15: 

2 UP - BA-3042s 2 DOWN - BA-3042s

Slide16: 

TA-938/G Is a black desk style, pushbutton telephone intended for use in sheltered areas

Slide17: 

TA-938/G Mode of Operation 2 Wire CB Power Requirements 24 volts DC

Slide18: 

TA-236 Identical to the TA-938 - Except - It is a ROTARY Phone (DP)

Slide19: 

STU III Terminal Provides Voice and Data Encryption with compatible STU III Terminals Provides Encryption Capabilities necessary to protect Commercial or Military Telecommunications

Slide21: 

Small size, Fits easily on any Desk Worldwide Operation Clear Mode of Operation as a Plain old Telephone during a loss of Power STU III Terminal

Slide22: 

STU III Terminal Accessible Emergency Zeroize Button Internal Two-Wire/Four-Wire Modem Easy Programming

Slide23: 

STU III Terminal Message Display to show status and User Information Tone and Pulse Dialing Speed Dialing

Slide24: 

STU III Terminal Interoperable CIK, Allowing the Use of 7 different Terminals with 1 CIK

Slide25: 

STU III Terminal Dual Keysets allowing the Terminal to Communicate securely at Two Classification Levels Compatible with DSN

Slide26: 

STU III Terminal Last, but not least, Intercom & Hold

Slide27: 

STU III Terminal STU III Terminals are UNCLASSIFIED Controlled Cryptographic Items (CCI)

Slide28: 

STU III Power AC/DC Converter Requires atleast 115V/50-60 Hz from a Commercial Outlet USMC has a variety of STU IIIs in stock

Slide29: 

ANALOG SWITCHBOARD SB-3614(V)/TT

Slide30: 

SB-3614(V)/TT Tactical, Ruggedized, 30 terminal Automatic Switchboard and provides service for _____________!

Slide31: 

2-wire CBS 2-wire 20Hz RDL and RDT 2-wire COMMON BATTERY DP and DTMF 4-wire PABX and CONV 2-wire DC CLOSURE TRUNKS DP and DTMF

Slide32: 

Can be connected with Additional Switchboards to form 60 or 90 lines system Maximum Number of 3 Switchboards can be stacked

Slide33: 

When stacking 3 Switchboards and forming up to a 90 line system, ONLY ONE Switchboard can be the MASTER and the remaining Switchboards must be SLAVE

Slide34: 

Power Requirements Requires an External Power Source of 24 volts DC 5 amps max. Can have 3 power sources connected to the SB-3614(V)/TT at one time

Slide35: 

Only TWO Power Cables are Supplied Power Connections - One Prime Power and Two External Batteries

Slide36: 

Garrison - DC Prime Power & Two External Batteries Field - Connect both Batteries NEVER connect batteries to DC Prime Power connection!!!!!!

Slide37: 

Operational Capabilities Provides for 2 conference links with 10 subscribers each

Slide38: 

TERMINATIONS TERMINALS 1 - 12 2W TERMINALS 13 - 30 2W/4W

Slide39: 

Circuit Card Assemblies

Slide40: 

Type I - 2W, 20 Hz Top 2 Odd, Bottom 2 Even Upper - Precedence L: Priority C: Unassigned R: Routine Lower - Service L: CBS Line C: RDL R: RDT

Slide41: 

Type II - 2W, CB L: CB/DP C: Unassigned R: CB/DTMF ODD EVEN

Slide42: 

Type III - 4W Trunks L: 4 Wire PABX C: Unassigned R: 4 Wire Converter TERMINALS 13 - 30 ODD EVEN

Slide43: 

Type IV - Army ODD - 2W CB EVEN - 6 Wire E&M TERMINALS 13 - 30 ODD EVEN EVEN

Slide44: 

Type V - 2W DC CLOSURE L: DC Closure DP C: Unassigned R: DC Closure DTMF ODD EVEN

Slide45: 

Interface Capabilities

Slide46: 

TYPE I TA-312/PT CBS/RDL SB-22/PT RDL/RDT SB-22A/PT CBS/RDL/RDT

Slide47: 

TYPE II CB/DTMF TA-938/G STU III TA-838/TT TA-312/PT W/TA-955/PT CB/DP TA-236/G

Slide48: 

TYPE III CONV SB-3614 PABX SB-3865 AN/TTC-42

Slide49: 

TYPE V DCO/DP DCO/DTMF

Slide50: 

Programming Information

Slide51: 

Program/Call Process Switch must be in the PROGRAM (UP) position Programming uses a 6 digit format and will be entered into the SB-3614(V)/TT by using the 4X4 Key Pad on the Switch

Slide52: 

FO - As First Digit Memory Data Entry FO - As Second Digit Trunk Group/Trunk Terminal

Slide53: 

F - As the First Digit Memory Data Verify F - As the Second Digit Precedence Classmarking

Slide54: 

I - As the First Digit Memory Data Delete I - As the Second Digit Operator Intercept Classmarking

Slide55: 

P - As the First Digit Memory Data Erase P - As the Second Digit Special Classmarking

Slide56: 

When using P as the First and Second Digit in the same Program it means !!!!!!! ERASE ALL DATA

Slide57: 

Special Classmarks What, Why Do I Need These!

Slide58: 

Special Classmarks for Trunking None: Manual in, Manual out 01: Manual in, Automatic out 02: Automatic in, Manual out 03: Automatic in, Automatic out

Slide59: 

TYPE I Type 1 cards are Classmarked 02 when designating a DTMF automatic RDT and classmarked 03 when designating a 20 Hz/DTMF applique trunk. SB-3614(V)/TT RDT (02) SB-22/PT OR SB-22A/PT W/TA-977/PT RDT (03) AN/UIQ-10(V) RDT (03)

Slide60: 

TYPE III Type III cards with mode switch set to converter are classmarked 01 when designating a manual 4-wire converter trunk. C-6709/G (RWI) CONV (01)

Slide61: 

TYPE V Type V cards are classmarked 01 when designating a manual in, automatic out trunk.

Slide62: 

Numbering Plan

Slide63: 

Uses a 5 Digit Numbering Plan Format A Switch Locator = (SL) A 3 Digit Subscriber Number = IXX

Slide64: 

SL = Any number 00-99 Consult your 6231.02A Escape Code = 9 Subscriber Number = IXX I =1-6, X = 0-9, X = 0-9

Slide65: 

When dialing External to your Switch Do the Following 9SL-DT-KXX 920-DT-101

Slide66: 

Terminal Assignment Sheet Before Programming the SB-3614(V)/TT You Must Have Completed a Terminal Assignment Sheet

Slide67: 

QUESTIONS?

authorStream Live Help