PowerIndTrucksslides

Powered Industrial Truck29 CFR 1910.178Final Rule: 

Powered Industrial Truck 29 CFR 1910.178 Final Rule “1.5 million workers operating nearly 1 million powered industrial trucks.”

Slide2: 

Roughly 100 workers killed per year related to powered industrial truck operations : 95,000 Injured (lost work days) per year Lack of training is one cause of powered industrial truck accidents. OSHA notes that many of the accidents listed could have been caused by improper training.

Development of a Training Program: 

Development of a Training Program 1910.178 (L)(2)(ii)-Training must consist of a combination of formal classroom instruction, operator practical exercises, and evaluation of the operator’s performance in the workplace 1910.178 (L)(2)(iii)-All operator training and evaluation shall be conducted by persons who have the knowledge, training, and experience to train powered industrial truck operators and evaluate their competence

Slide4: 

Powered industrial truck operators shall receive initial training in the following topics, except in topics which the employer can demonstrate are not applicable to safe operation of the truck in the employer’s workplace Training Program Content: 1910.178 (L)(3) -

Truck Related Topics Content:1910.178 (L)(3)(i)-: 

Truck Related Topics Content: 1910.178 (L)(3)(i)- (A) All operating instructions - warnings and precautions for the types of trucks the operator will be authorized to operate (B) Similarities to, and differences from the automobile: Forklift Narrow wheel track Short wheelbase High structure 3-point suspension Center of Gravity is higher and moves in a significant range w/loads 3 or 4 wheels, Steers from the rear Automobile Wide wheel track Long wheelbase Low structure 4- point suspension Center of Gravity is low and moves in a narrow range 4 wheels , Steers from the front

Truck Related Topics Content:1910.178 (L)(3)(i)- Continued: 

Truck Related Topics Content: 1910.178 (L)(3)(i)- Continued (C) Controls & Instruments - Location, What they do, How they operate (D) Engine or Motor - operation and maintenance (E) Steering & Maneuvering (F) Visibility - including restrictions due to loading (G) Fork and attachments - adaptation operations and limitations (H) Vehicle capacity (I) Vehicle stability

Truck Related Content Continued:1910.178 (L)(3)(I): 

Truck Related Content Continued: 1910.178 (L)(3)(I) (J) Vehicle Inspection and maintenance / that the operator will be required to perform (K) Refueling and/or charging, recharging batteries (L) Operating limitations - and (M) Any other operating instructions, warnings or precautions listed in the operator's manual for the types of vehicles that the employee is being trained to operate

Workplace Related Topics Content Continued: 1910.178 (L)(3)(ii) : 

Workplace Related Topics Content Continued: 1910.178 (L)(3)(ii) (A) Surface conditions where the vehicle will be operated (B) Composition of loads to be carried & load stability (C) Load manipulation, stacking , un-stacking (D) Pedestrian traffic in areas where vehicle will be operated (E) Narrow aisles and other restricted places (F) Hazardous classified locations

Workplace Related Content Continued: 1910.178 (L)(3)(ii) : 

Workplace Related Content Continued: 1910.178 (L)(3)(ii) (G) Ramps and other sloped surfaces that could effect the vehicle’s stability (H) Closed environments and other areas where insufficient ventilation or poor maintenance could cause a buildup of carbon monoxide or diesel exhaust (I) Other unique or potentially hazardous environmental conditions in the workplace that could affect safe operation

Other Hazards : 

Other Hazards Falling Loads Falling from Platforms, Curbs, Trailers, etc.. Obstructed Views Inattention Riders Vehicle Not Maintained Carbon Monoxide Rough - Uneven - Unleveled floors Unusual Loads Classified Areas Narrow Aisles Pedestrians

Training program implementation: 

Training program implementation 1910.178 (L)(2)(i) - Trainees may operate a powered industrial truck only: 1910.178 (L)(2)(i)(A) - Under the direct supervision of a person who has the knowledge, training, and experience to train operators and evaluate their competence; and, 1910.178 (L)(2)(i)(B) - Where such operator does not endanger the trainee or other employees

Refresher Training 1910.178 (L)(4)(ii): 

Refresher Training 1910.178 (L)(4)(ii) Refresher training in relevant topics shall be provided to the operator when: A: The operator has been observed to operate the vehicle in an unsafe manner B: When the operator has been involved in an accident or a near miss incident C: When the operator has received an evaluation that reveals that the operator is not operating the truck safely

Refresher Training Continued: 1910.178 (L)(4)(ii): 

Refresher Training Continued: 1910.178 (L)(4)(ii) D: The operator is assigned to drive a different type of truck; or E: A condition in the workplace changes in a manner that could affect safe operation of the truck

Operator Qualification: 

Operator Qualification 1910.178 (L)(1)(i) - The employer shall ensure: each potential operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (L) 1910.178 (L)(1)(ii) - Prior to permitting an employee to operate a powered industrial truck (except for training purposes) the employee has successfully completed the training required by this paragraph (L), except as permitted by paragraph (L)(5) -(Avoidance of Duplicative Training Section)

Certification 1910.178 (L)(6) : 

Certification 1910.178 (L)(6) The employer shall certify that each operator has : Been trained and evaluated as required in paragraph (L) The certification shall include: Name of Trainee Operator Date of Training Date of the Evaluation Identify the person(s) performing the training and evaluation