(I) Initialization of Coordinate Storage

The LSS Miracle Software for the HP 35s Calculator : 

The LSS Miracle Software for the HP 35s Calculator INITIALIZATION OF COORDINATE STORAGE Program (I) ___________________________________________________ Overview and explanation This program initializes coordinates numbered 1 through 98 to a value of North= 0 and East=0 and sets the basic “DONE” and “Show Coordinate Numbers and Values” by invoking Program “Q”. This program must be run before running Program “P”. ___________________________________________________ WARNING: Do not remove the batteries for more than two minutes or use the “CLEAR” “ALL” function or the programs in the calculator will be destroyed. Please read the first two pages of the manual that comes with the pre-programmed calculator before attempting to operate it.

The LSS Miracle Software for the HP 35s Calculator : 

The LSS Miracle Software for the HP 35s Calculator This program allows the User to initiate the storage area for coordinate values. No input or interaction is required by the User. WARNING!!! This program destroys all coordinate values for coordinate #1 through coordinate #98. It should only be used one time at the beginning of computations and Users are cautioned to remove this program immediately thereafter.

The LSS Miracle Software for the HP 35s Calculator : 

The LSS Miracle Software for the HP 35s Calculator After initializing values coordinates 1 through 98 to “0”, this program also calls Program “Q” and allows the User to set the system switches for showing coordinate values and showing the “DONE” message in Program “P”.

The LSS Miracle Software for the HP 35s Calculator : 

The LSS Miracle Software for the HP 35s Calculator The End INITIALIZATION OF COORDINATE STORAGE