mobot

Mobot: Mobile Robot: 

Prof. John (Jizhong) Xiao Department of Electrical Engineering City College of New York jxiao@ccny.cuny.edu Mobot: Mobile Robot Introduction to ROBOTICS

Slide2: 

Contents Introduction Classification of wheels Fixed wheel Centered orientable wheel Off-centered orientable wheel Swedish wheel Mobile Robot Locomotion Differential Drive Tricycle Synchronous Drive Omni-directional Ackerman Steering Kinematics models of WMR Summary

Slide3: 

Locomotion Locomotion is the process of causing an autonomous robot to move In order to produce motion, forces must be applied to the vehicle

Wheeled Mobile Robots (WMR): 

Wheeled Mobile Robots (WMR)

Wheeled Mobile Robots: 

Wheeled Mobile Robots Combination of various physical (hardware) and computational (software) components A collection of subsystems: Locomotion: how the robot moves through its environment Sensing: how the robot measures properties of itself and its environment Control: how the robot generate physical actions Reasoning: how the robot maps measurements into actions Communication: how the robots communicate with each other or with an outside operator

Wheeled Mobile Robots: 

Wheeled Mobile Robots Locomotion — the process of causing an robot to move. In order to produce motion, forces must be applied to the robot Motor output, payload Kinematics – study of the mathematics of motion without considering the forces that affect the motion. Deals with the geometric relationships that govern the system Deals with the relationship between control parameters and the behavior of a system. Dynamics – study of motion in which these forces are modeled Deals with the relationship between force and motions.

Notation: 

Notation Posture: position(x, y) and orientation 

Wheels: 

Wheels Lateral slip Rolling motion

Steered Wheel: 

Steered Wheel Steered wheel The orientation of the rotation axis can be controlled

Idealized Rolling Wheel: 

1. The robot is built from rigid mechanisms. 2. No slip occurs in the orthogonal direction of rolling (non-slipping). 3. No translational slip occurs between the wheel and the floor (pure rolling). 4. The robot contains at most one steering link per wheel. 5. All steering axes are perpendicular to the floor. Non-slipping and pure rolling Assumptions Idealized Rolling Wheel

Robot wheel parameters: 

Robot wheel parameters For low velocities, rolling is a reasonable wheel model. This is the model that will be considered in the kinematics models of WMR Wheel parameters: r = wheel radius v = wheel linear velocity w = wheel angular velocity t = steering velocity

Wheel Types: 

Wheel Types Fixed wheel Centered orientable wheel Off-centered orientable wheel (Castor wheel) Swedish wheel:omnidirectional property

Fixed wheel: 

Fixed wheel Velocity of point P Restriction to the robot mobility Point P cannot move to the direction perpendicular to plane of the wheel. x y where, ax : A unit vector to X axis

Centered orientable wheels: 

Centered orientable wheels Velocity of point P Restriction to the robot mobility ax : A unit vector of x axis ay : A unit vector of y axis where,

Off-Centered Orientable Wheels: 

Velocity of point P Restriction to the robot mobility ax : A unit vector of x axis ay : A unit vector of y axis where, Off-Centered Orientable Wheels

Swedish wheel: 

Swedish wheel Velocity of point P Omnidirectional property ax : A unit vector of x axis as : A unit vector to the motion of roller where,

Examples of WMR: 

Smooth motion Risk of slipping Some times use roller-ball to make balance Bi-wheel type robot Omnidirectional robot Caterpillar type robot Exact straight motion Robust to slipping Inexact modeling of turning Free motion Complex structure Weakness of the frame Example Examples of WMR

Mobile Robot Locomotion: 

Mobile Robot Locomotion Instantaneous center of rotation (ICR) or Instantaneous center of curvature (ICC) A cross point of all axes of the wheels

Degree of Mobility: 

Degree of Mobility Degree of mobility The degree of freedom of the robot motion Degree of mobility : 0 Degree of mobility : 2 Degree of mobility : 3 Degree of mobility : 1 Cannot move anywhere (No ICR) Fixed arc motion (Only one ICR) Variable arc motion (line of ICRs) Fully free motion ( ICR can be located at any position)

Degree of Steerability: 

Degree of Steerability Degree of steerability The number of centered orientable wheels that can be steered independently in order to steer the robot Degree of steerability : 0 Degree of steerability : 2 Degree of steerability : 1 No centered orientable wheels One centered orientable wheel Two mutually dependent centered orientable wheels Two mutually independent centered orientable wheels

Degree of Maneuverability: 

Degree of Maneuverability Degree of Mobility 3 2 2 1 1 Degree of Steerability 0 0 1 1 2 The overall degrees of freedom that a robot can manipulate: Examples of robot types (degree of mobility, degree of steerability)

Degree of Maneuverability: 

Degree of Maneuverability

Non-holonomic constraint: 

Non-holonomic constraint So what does that mean? Your robot can move in some directions (forward and backward), but not others (sideward). A non-holonomic constraint is a constraint on the feasible velocities of a body

Mobile Robot Locomotion: 

Mobile Robot Locomotion Differential Drive two driving wheels (plus roller-ball for balance) simplest drive mechanism sensitive to the relative velocity of the two wheels (small error result in different trajectories, not just speed) Steered wheels (tricycle, bicycles, wagon) Steering wheel + rear wheels cannot turn 90º limited radius of curvature Synchronous Drive Omni-directional Car Drive (Ackerman Steering)

Differential Drive: 

Posture of the robot v : Linear velocity of the robot w : Angular velocity of the robot (notice: not for each wheel) (x,y) : Position of the robot : Orientation of the robot Control input Differential Drive 

Differential Drive: 

Differential Drive – linear velocity of right wheel – linear velocity of left wheel r – nominal radius of each wheel R – instantaneous curvature radius of the robot trajectory (distance from ICC to the midpoint between the two wheels). Property: At each time instant, the left and right wheels must follow a trajectory that moves around the ICC at the same angular rate , i.e.,

Differential Drive: 

Differential Drive Nonholonomic Constraint Kinematic equation Physical Meaning? Relation between the control input and speed of wheels Posture Kinematics Model: Kinematics model in world frame

Differential Drive: 

Differential Drive Kinematics model in robot frame ---configuration kinematics model

Basic Motion Control: 

Basic Motion Control Instantaneous center of rotation Straight motion R = Infinity VR = VL Rotational motion R = 0 VR = -VL R : Radius of rotation

Basic Motion Control: 

Velocity Profile : Radius of rotation : Length of path : Angle of rotation 3 1 0 2 3 1 0 2 Basic Motion Control

Tricycle : 

Tricycle Three wheels and odometers on the two rear wheels Steering and power are provided through the front wheel control variables: steering direction α(t) angular velocity of steering wheel ws(t) The ICC must lie on the line that passes through, and is perpendicular to, the fixed rear wheels

Tricycle : 

Tricycle If the steering wheel is set to an angle α(t) from the straight-line direction, the tricycle will rotate with angular velocity ω(t) about ICC lying a distance R along the line perpendicular to and passing through the rear wheels.

Tricycle: 

Tricycle d: distance from the front wheel to the rear axle

Tricycle : 

Tricycle

Tricycle : 

Tricycle Kinematics model in the world frame ---Posture kinematics model

Synchronous Drive: 

Synchronous Drive In a synchronous drive robot (synchronous drive) each wheel is capable of being driven and steered. Typical configurations Three steered wheels arranged as vertices of an equilateral triangle often surmounted by a cylindrical platform All the wheels turn and drive in unison This leads to a holonomic behavior

Synchronous Drive: 

Synchronous Drive

Synchronous Drive: 

Synchronous Drive All the wheels turn in unison All of the three wheels point in the same direction and turn at the same rate This is typically achieved through the use of a complex collection of belts that physically link the wheels together Two independent motors, one rolls all wheels forward, one rotate them for turning The vehicle controls the direction in which the wheels point and the rate at which they roll Because all the wheels remain parallel the synchro drive always rotate about the center of the robot The synchro drive robot has the ability to control the orientation θ of their pose directly.

Synchronous Drive: 

Synchronous Drive Control variables (independent) v(t), ω(t)

Synchronous Drive: 

Synchronous Drive Particular cases: v(t)=0, w(t)=w during a time interval ∆t, The robot rotates in place by an amount w ∆t . v(t)=v, w(t)=0 during a time interval ∆t , the robot moves in the direction its pointing a distance v ∆t.

Omidirectional : 

Omidirectional Swedish Wheel

Car Drive (Ackerman Steering): 

Car Drive (Ackerman Steering) Used in motor vehicles, the inside front wheel is rotated slightly sharper than the outside wheel (reduces tire slippage). Ackerman steering provides a fairly accurate dead-reckoning solution while supporting traction and ground clearance. Generally the method of choice for outdoor autonomous vehicles.

Ackerman Steering : 

Ackerman Steering where d = lateral wheel separation l = longitudinal wheel separation i = relative steering angle of inside wheel o = relative steering angle of outside wheel R=distance between ICC to centerline of the vehicle

Ackerman Steering: 

Ackerman Steering The Ackerman Steering equation: :

Ackerman Steering: 

Ackerman Steering Equivalent:

Kinematic model for car-like robot: 

Kinematic model for car-like robot X Y   : forward vel : steering vel

Kinematic model for car-like robot: 

Kinematic model for car-like robot X Y   non-holonomic constraint: : forward velocity : steering velocity

Dynamic Model: 

Dynamic Model X Y   Dynamic model

Summary: 

Summary Mobot: Mobile Robot Classification of wheels Fixed wheel Centered orientable wheel Off-centered orientable wheel (Caster Wheel) Swedish wheel Mobile Robot Locomotion Degrees of mobility 5 types of driving (steering) methods Kinematics of WMR Basic Control

Thank you!: 

Thank you! Homework 6 posted Next class: Robot Sensing Time: Nov. 13, Tue