What Is The Difference Between Coolant And Lubricant?

Views:
 
Category: Others/ Misc
     
 

Presentation Description

Coolant keep the engine operating at a proper temperature and prevent freezing or overheating and Lubricants help to avoid material damage, wearing away, weathering and rust development on metal surfaces. http://shieldoils.com/what-is-the-difference-between-coolant-and-lubricant/

Comments

Presentation Transcript

slide 1:

Shield Lubricants

slide 2:

What Is The Difference Between Coolant And Lubricant Coolant also called anti-freeze is a bright yellow or green fluid substance that blends with the water added to vehicles both diesel and gasoline to keep the engine operating at a proper temperature and prevent freezing or over heating. Coolant is made either from ethylene glycol or propylene glycol is capable of altering the boiling point or freezing point of the liquid. Difference between coolant and lubricant

slide 3:

For instance when mixed with water in appropriate proportion in a vehicle’s radiator the water in radiator no longer solidifies at 32 degrees Fahrenheit. Instead the liquid will freeze at temperatures colder than -35 degrees Fahrenheit. The same way typically when the water boils at 212 degrees Fahrenheit with coolant mixed in a right proportion will not let the water inside the radiator to boil until 223 degrees Fahrenheit.

slide 4:

Provides ideal cooling and friction resistance Prevents corrosion Physical organic and industrial constancy during use Does not have destructive effects on the environment No disproportionate frothing Let’s also look at its properties The function of coolant is as follows: The pump pulls the coolant from the foot of the radiator and forces the coolant through the water outlets and channels and then releases it into the top radiator cistern. The coolant then moves across a line of pipes to the bottom part of the radiator where cooling sequence initiates.

slide 5:

The radiator is positioned behind a fan that is made to run either by a water pipe or an electric engine. The fan makes sure that the airflow is consistent when the vehicle moves or is at rest. The descending flow of coolant via the radiator produces a thermo siphon movement. This merely denotes that the coolant is boiled in the outlets of the engine and its extensions. As it inflates it turns to be less thick and lighter. As it is light the coolant flows across all the outlets. When the vehicle stops it again turns out to be thicker. This makes the coolant settle down at the lower part of the tank. Thus the whole process makes the engine stay calm when in motion or halt.

slide 6:

Oil Based Engine oil Coolants which includes straight oils and solvable oils Chemical-based Engine Coolants which includes artificial dyes and semi- synthetic Coolant types:

slide 7:

Lubricant: Lubricant oil denotes to any ingredient that is materially combined to eliminate resistance between any two surfaces that are in movement. Lubricants help to avoid material damage wearing away weathering and rust development on metal surfaces. Lubricants are usually made up of 90 petroleum-based oil and a wide variety of additives to induce needed physical characteristics that are exclusive to any given usage.

slide 8:

Lubricant Company and Lubricant Manufacturers who build lubes engineering applications usually make sure that the oil has the following properties: Helps to prevent corrosion High boiling point High viscosity number Highly resistant towards rust Hydraulic constancy Low freezing point

slide 9:

Functions of Lubricant The shield lubes help dissipate heat and cool parts. It cleanses the inner part of the engine by getting rid of pollutants such as metal dust plastic gum and other dirt. Absorbs jolts between moving surfaces and makes the engine operate quietly which in turn also increases the engine’s lifespan. Constituents like gear or nuts have constant contact with the covers and may face heavy loads. With the application of lube oil it guards the elements against enlarged load by creating an oil layer to scatter weight in the coating.  Lubricant are in various forms such as Oils Greases and Dry Lubricants Source :- http://shieldoils.com/what-is- the-difference-between-coolant-and- lubricant/

slide 10:

Contact Details Kuwait Dana Lubes Company  Kuwait Dana Lubes Company Kuwait Dana Lubes Company Kuwait Dana Lubes Company +965 2326 0723 kuwaitdana06gmail.com Ali Sabah Al Salem Kuwait Shieldoils.com

authorStream Live Help