pit 2

Powered Industrial Trucks -Operator Training: 

Powered Industrial Trucks - Operator Training 1910.178 (l) 1915.120 (a) 1917.1 (a)(2)(xiv) 1918.1 (b)(10) 1926.602 (d)

Powered IndustrialTruck - Definition: 

Powered Industrial Truck - Definition A mobile, power-propelled truck used to carry, push, pull, lift, stack or tier materials. [American Society of Mechanical Engineers (ASME) definition] Excluded are vehicles used for earth moving and over-the-road hauling. Commonly known as forklifts, pallet trucks, rider trucks, forktrucks, or lifttrucks. Can be powered through electric or combustion engines.

Scope of Standard: 

Scope of Standard The scope provisions of 1910.178(a), which are based on ANSI B56.1 - 1969, remain in effect and cover: ... fork trucks, tractors, platform lift trucks, motorized hand trucks, and other specialized industrial trucks powered by electric motors or internal combustion engines. It does not apply to compressed air or nonflammable compressed gas-operated industrial trucks, farm vehicles, nor vehicles intended primarily for earth moving or over-the-road hauling. This scope covers general industry, construction and shipyards.

Scope of Standard (continued): 

Scope of Standard (continued) For marine terminal and longshoring industries, all powered industrial trucks are covered, no matter what specialized name they are given. This includes, but is not limited to, straddle carriers, hustlers, toploaders, container reach stackers, and other vehicles that carry, push, pull, lift, or tier loads.

Reasons for New Standard: 

Reasons for New Standard Powered industrial truck accidents cause approximately 100 fatalities and 36,340 serious injuries in general industry and construction annually. It is estimated that 20 - 25% of the accidents are, at least in part, caused by inadequate training.

Forklift Fatalities, 1992-1996: 

Forklift Fatalities, 1992-1996 Source: Bureau of Labor Statistics, Job Related Fatalities Involving Forklifts

Industries Where Powered Industrial Truck Accidents Occurred: 

Industries Where Powered Industrial Truck Accidents Occurred Source: OSHA Fatality/Catastrophe Reports, complied by OSHA Office of Electrical/Electronic and Mechanical Engineering Safety Standards.

Nonfatal Occupational Injuries and Illnesses by Source, 1996: 

Source: Bureau of Labor Statistics, Job Related Fatalities by Selected Characteristics, 1996. Nonfatal Occupational Injuries and Illnesses by Source, 1996

Revised Operator Training Requirements: 

Revised Operator Training Requirements General Industry: 1910.178 is amended by revising paragraph (l) and adding Appendix A. Shipyard Employment: New section 1915.120 and Appendix A are added. Marine Terminals: Section 1917.1 is amended by adding new paragraph (a)(2)(xiv) and Appendix A. Longshoring: Section 1918.1 is amended by adding new paragraph (b)(10) and Appendix A. Construction: 1926.602 is amended by adding new paragraph (d) and Appendix A.

Operator Training: 

Operator Training Safe operations The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by successful completion of the training and evaluation specified in the OSHA standard. Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the required training (or previously received appropriate training).

Training Program Implementation: 

Training Program Implementation Trainees may operate a powered industrial truck only: Under direct supervision of a person who has the knowledge, training, and experience to train operators and evaluate their competence; and, Where such operation does not endanger the trainee or other employees.

Slide12: 

Training Program Implementation (continued) Training shall consist of a combination of: Formal instruction (e.g., lecture, discussion, interactive computer learning, written material), Practical training (demonstrations and exercises performed by the trainee), and Evaluation of the operator’s performance in the workplace

Training Program Implementation (continued): 

Training Program Implementation (continued) Training and evaluation shall be conducted by a person with the knowledge, training and experience to train powered industrial truck operators and evaluate their competence.

Training Program Content: 

Training Program Content Operators shall receive initial training in the following topics, except in topics which the employer can demonstrate are not applicable to safe operation in the employer’s workplace. Truck-related topics Workplace-related topics The requirements of the standard

Training Program Content (continued): 

Training Program Content (continued) Operating instructions, warnings and precautions Differences from automobile Controls and instrumentation Engine or motor operation Steering and maneuvering Visibility Truck-related topics Fork and attachment adaptation, operation, use Vehicle capacity and stability Vehicle inspection and maintenance that the operator will be required to perform Refueling/Charging/ Recharging batteries Operating limitations Other instructions, etc.

Training Program Content (continued): 

Training Program Content (continued) Surface conditions Composition and stability of loads Load manipulation, stacking, unstacking Pedestrian traffic Narrow aisles and restricted areas Operating in hazardous (classified) locations Operating on ramps and sloped surfaces Potentially hazardous environmental conditions Operating in closed environments or other areas where poor ventilation or maintenance could cause carbon monoxide or diesel exhaust buildup Workplace-related topics

Training Program Content (continued): 

Training Program Content (continued) The requirements of the OSHA standard on powered industrial trucks must also be included in the initial operator training program.

Refresher Training and Evaluation: 

Refresher Training and Evaluation Refresher training, including an evaluation of the effectiveness of that training, shall be conducted to ensure that the operator has the knowledge and skills needed to operate the powered industrial truck safely. Refresher training required when: Unsafe operation Accident or near-miss Evaluation indicates need Different type of equipment introduced Workplace condition changes

Refresher Training and Evaluation (continued): 

Refresher Training and Evaluation (continued) An evaluation of each powered industrial truck operator’s performance must be conducted: After initial training, After refresher training, and At least once every three years

Avoidance of Duplicative Training: 

Avoidance of Duplicative Training If an operator has previously received training in a topic specified in this section, and the training is appropriate to the truck and working conditions encountered, additional training in that topic is not required if the operator has been evaluated and found competent to operate the truck safely.

Certification: 

Certification The employer shall certify that each operator has been trained and evaluated as required by the standard. Certification shall include: Name of operator Date of training Date of evaluation Identity of person(s) performing the training or evaluation

Dates: 

Dates The employer shall ensure that operators of powered industrial trucks are trained, as appropriate, by the dates shown in the following table. If the employee was hired: The initial training and evaluation of that employee must be completed: Before December 1, 1999 By December 1, 1999 After December 1, 1999 Before the employee is assigned to operate a powered industrial truck.

Effective Powered Industrial Truck Operator Training Program: 

Effective Powered Industrial Truck Operator Training Program Four major areas of concern must be addressed: The general hazards that apply to the operation of all or most powered industrial trucks; The hazards associated with the operation of particular types of trucks; The hazards of workplaces generally; and, The hazards of the particular workplace where the vehicle operates.

Types of Powered Industrial Trucks: 

Types of Powered Industrial Trucks There are many different types of powered industrial trucks covered by the OSHA standard. Commonly used types include: High lift trucks, counterbalanced trucks, cantilever trucks, rider trucks, forklift trucks, high lift trucks, high lift platform trucks, low lift trucks, motorized hand trucks, pallet trucks, straddle trucks, reach rider trucks, high lift order picker trucks, motorized hand/rider trucks, and counterbalanced front/side loader lift trucks. A single type of truck can only be described by calling it by all of its characteristics, (e.g., a high lift, counterbalanced, sit down rider truck).

Unique Characteristics of Powered Industrial Trucks: 

Unique Characteristics of Powered Industrial Trucks Each type of powered industrial truck has its own unique characteristics and some inherent hazards. To be effective, training must address the unique characteristics of the type of vehicle the employee is being trained to operate.

Components of a Forklift Truck*: 

Components of a Forklift Truck* *One of the most common types of powered industrial trucks

Classes of Commonly-Used Powered Industrial Trucks*: 

Classes of Commonly-Used Powered Industrial Trucks* The Industrial Truck Association has placed powered industrial trucks into 7 classes. Class I - Electric motor rider trucks Class II - Electric motor narrow aisle trucks Class III - Electric motor hand trucks or hand/rider trucks Class IV - Internal combustion engine trucks (solid/cushion tires) Class V - Internal combustion engine trucks (pneumatic tires) Class VI - Electric and internal combustion engine tractors Class VII - Rough terrain forklift trucks * Note that this classification refers to commonly-used vehicles and does not include all powered industrial trucks covered by the OSHA standard.

Class I - Electric Motor Rider Trucks: 

Class I - Electric Motor Rider Trucks Counterbalanced rider type, stand up Three wheel electric trucks, sit-down Counterbalanced rider type, cushion tires, sit-down (high and low platform) Counterbalanced rider, pneumatic tire, sit-down (high and low platform)

Class I - Electric Motor Rider Trucks: 

Class I - Electric Motor Rider Trucks

Class I - Electric Motor Rider Trucks: 

Class I - Electric Motor Rider Trucks Counterbalanced Rider Type, Stand-Up

Class II - Electric Motor Narrow Aisle Trucks: 

Class II - Electric Motor Narrow Aisle Trucks High lift straddle Order picker Reach type outrigger Side loaders, turret trucks, swing mast and convertible turret/stock pickers Low lift pallet and platform (rider)

Class II - Electric Motor Narrow Aisle Trucks : 

Class II - Electric Motor Narrow Aisle Trucks

Class II - Narrow Aisle Trucks : 

Class II - Narrow Aisle Trucks

Class III - Electric Motor Hand or Hand/Rider Trucks: 

Class III - Electric Motor Hand or Hand/Rider Trucks Low lift platform Low lift walkie pallet Reach type outrigger High lift straddle High lift counterbalanced Low lift walkie/rider pallet

Class III - Electric Motor Hand or Hand/Rider Trucks: 

Class III - Electric Motor Hand or Hand/Rider Trucks

Class III - Hand & Hand/Rider Trucks: 

Class III - Hand & Hand/Rider Trucks

Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires: 

Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires Fork, counterbalanced (cushion/solid tires)

Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires: 

Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires

Class V - Internal Combustion Engine Trucks - Pneumatic Tires: 

Class V - Internal Combustion Engine Trucks - Pneumatic Tires Fork, counterbalanced (pneumatic tires)

Class V - Internal Combustion Engine Trucks (Pneumatic Tires): 

Class V - Internal Combustion Engine Trucks (Pneumatic Tires)

Class VI - Electric & Internal Combustion Engine Tractors: 

Class VI - Electric & Internal Combustion Engine Tractors Sit-down rider

Class VII - Rough Terrain Forklift Trucks: 

Class VII - Rough Terrain Forklift Trucks Straight-mast forklift Extended-reach forklift All rough terrain forklift trucks

Rough Terrain Straight Mast Forklifts: 

Rough Terrain Straight Mast Forklifts

Rough Terrain Extended-Reach Forklifts: 

Rough Terrain Extended-Reach Forklifts