WIKA OEM PRESSURE TRANSMITTER| Instronline

Views:
 
Category: Entertainment
     
 

Presentation Description

The model O-10 pressure transmitter has been developed for a wide variety of industrial applications. A large range of process and electrical connections, as well as all commonly used pressure ranges and output signals, set the model O-10 apart. For applications in which water is used as a medium, we recommend a 5-fold overpressure safety in combination with a condensation-tight case. For More Information visit on our website:- www.instronline.com Our E-mail Address:-info@instronline.com

Comments

Presentation Transcript

slide 1:

Page 1 of 11 WIKA data sheet PE 81.65 ∙ 03/2013 WIKA data sheet PE 81.65 Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 T O-10 5 Data sheets showing similar products: Pressure transmitter for general industrial applications model A-10 see data sheet PE 81.60 Pressure transmitter model O-10 T Applications ■ Hydraulics and pneumatics ■ Pumps and compressors ■ Machine building ■ Building services Special features ■ Measuring ranges from 0 … 6 to 0 … 600 bar ■ Non-linearity 0.5 ■ Standard industrial signals ■ Electrical connection: Angular connector form A and C circular connector M12 x 1 Metri-Pack series 150 cable outlet 2 m unshielded or shielded ■ Many internationally customary process connections Description The model O-10 pressure transmitter has been developed for a wide variety of industrial applications. The large range of process and electrical connections as well as all commonly used pressure ranges and output signals set the model O-10 apart. For applications in which water is used as a medium we recommend a 5-fold overpressure safety in combination with a condensation-tight case. Due to its specifcations its features and its price the pressure transmitter is ideally suited to OEM applications with an annual quantity requirement of more than 1000 units of each article number. Accordingly the minimum order quantity is 50 units per article number. The model O-10 has been designed specifcally for the demands of the global market. The pressure transmitter ofers international units and the corresponding approvals for the North American and Russian markets. It goes without saying that the model O-10 can be delivered with customer-specifc labelling e.g. company logo and model designation.

slide 2:

WIKA data sheet PE 81.65 ∙ 03/2013 Page 2 of 11 Measuring ranges ■ Model O-10 T Relative pressure bar 0 ... 6 1 2 0 ... 10 1 2 0 ... 16 0 ... 25 0 ... 40 0 ... 60 0 ... 100 0 ... 160 0 ... 250 0 ... 400 0 ... 600 psi 0 ... 100 1 2 0 ... 160 0 ... 200 0 ... 250 0 ... 300 0 ... 400 0 ... 500 0 ... 600 0 ... 750 0 ... 800 0 ... 1000 0 ... 1500 0 ... 2000 0 ... 3000 0 ... 4000 0 ... 5000 0 ... 6000 0 ... 7500 0 ... 8000 Vacuum and +/- measuring range bar -1 ... +5 2 -1 ... +9 2 -1 ... +15 -1 ... +24 -1 ... +39 -1 ... +59 psi -30 inHg ... +100 2 -30 inHg ... +160 -30 inHg ... +200 -30 inHg ... +300 -30 inHg ... +500 1 Measuring deviation of the zero signal ≤ ±0.7 of span 2 Non-linearity ≤ ±0.6 of span BFSL The given measuring ranges are also available in kg/cm 2 kPa and MPa. Other measuring ranges on request. Overpressure limit 2 times 3 times on request Vacuum tightness Y es ■ Model O-10 5 Relative pressure bar 0 ... 6 0 ... 10 0 ... 16 0 ... 25 0 ... 40 Other measuring ranges on request. Overpressure limit 5 times Vacuum tightness Y es Versions Model O-10 T Standard version Model O-10 5 With 5-fold overpressure limit and condensation-tight case For applications with water as a medium we recommend a 5-fold overpressure safety for protection against water hammer efects and a condensation-tight case.

slide 3:

Page 3 of 11 WIKA data sheet PE 81.65 ∙ 03/2013 Output signals ■ Model O-10 T Signal type Signal Current 2-wire 4 ... 20 mA Voltage 3-wire DC 0.5 ... 4.5 V DC 0 ... 5 V DC 1 ... 5 V DC 0 ... 10 V Ratiometric 3-wire DC 0.5 ... 4.5 V Other output signals available on request. Load in Ω Current output 2-wire: ≤ power supply - 8 V / 0.02 A Voltage output 3-wire: maximum output signal / 1 mA Ratiometric output signal 3-wire: 4.5 kΩ ■ Model O-10 T Signal type Signal Current 2-wire 4 ... 20 mA Voltage 3-wire DC 0.5 ... 4.5 V DC 1 ... 5 V Ratiometric 3-wire DC 0.5 ... 4.5 V Other output signals available on request. Load in Ω Current output 2-wire: ≤ power supply - 8 V / 0.02 A Voltage output 3-wire: maximum output signal / 1 mA Ratiometric output signal 3-wire: 4.5 kΩ

slide 4:

WIKA data sheet PE 81.65 ∙ 03/2013 Page 4 of 11 Reference conditions per IEC 61298-1 Temperature 15 ... 25 °C Atmospheric pressure 860 ... 1060 mbar Humidity 45 ... 75 relative Power supply Current output: DC 14 V Voltage output: DC 24 V Ratiometric output signal: DC 5 V Nominal position Calibrated in vertical mounting position with pressure connection facing downwards. Time response Settling time 2 ms Voltage supply Power supply The power supply depends on the selected output signal. 4 ... 20 mA: DC 8 ... 30 V DC 0.5 ... 4.5 V: DC 8 ... 30 V DC 0 ... 5 V: DC 8 ... 30 V DC 1 ... 5 V: DC 8 ... 30 V DC 0 ... 10 V: DC 14 ... 30 V DC 0.5 ... 4.5 V ratiometric: DC 4.5 ... 5 V The power supply for the pressure transmitter must be made via an energy-limited electrical circuit in accordance with section 9.4 of UL/EN/IEC 61010-1 or an LPS to UL/EN/IEC 60950-1 or class 2 in accordance with UL1310/UL1585 NEC or CEC. The power supply must be suitable for operation above 2000 m should the pressure transmitter be used at this altitude. Total current consumption Current output: The total current consumption corresponds to the value of the output signal current 4 ... 20 mA maximum 25 mA Voltage output: 5 mA

slide 5:

Page 5 of 11 WIKA data sheet PE 81.65 ∙ 03/2013 Accuracy data ■ Model O-10 T Non-linearity per IEC 61298-2 ≤ ±0.5 of span BFSL A diferent non-linearity applies to some measuring ranges see "Measuring ranges O-10 T". Measuring deviation of the zero signal ≤ ±0.5 of span A diferent measuring deviation applies to some measuring ranges see "Measuring ranges model O-10 T". Accuracy at reference conditions ≤ ±1.2 of span Temperature error at 0 ... 80 °C ≤ ±1.5 of span Long-term stability ≤ ±0.3 of span/year ■ Model O-10 5 Non-linearity per IEC 61298-2 ≤ ±0.5 of span BFSL Measuring deviation of the zero signal ≤ ±1 of span Accuracy at reference conditions ≤ ±2.0 of span Temperature error at 0 ... 80 °C Mean temperature coefcient of zero point: Typical: 0.3 of span/10 K Maximum: 0.6 of span/10 K Mean temperature coefcient of span: ≤ ±0.1 of span/10 K Long-term drift ≤ ±0.8 of span/year

slide 6:

WIKA data sheet PE 81.65 ∙ 03/2013 Page 6 of 11 Operating conditions ■ Model O-10 T Ingress protection per IEC 60529 For ingress protections see "Electrical connections model O-10 T" The stated ingress protection only applies when plugged in using mating connectors that have the appropriate ingress protec- tion. Vibration resistance per IEC 60068-2-6 20 g 20 ... 2000 Hz 120 min. Shock resistance per IEC 60068-2-27 40 g 6 ms mechanical shock Service life 10 million load cycles Free fall test Resistant to an impact onto concrete from 1 m Permissible temperatures Medium: -30 ... +100 °C Ambient: -30 ... +100 °C Storage: -30 ... +100 °C ■ Model O-10 5 Ingress protection per IEC 60529 For ingress protections see "Electrical connections model O-10 5" The stated ingress protection only applies when plugged in using mating connectors that have the appropriate ingress protec- tion. Vibration resistance per IEC 60068-2-6 20 g 20 ... 2000 Hz 120 min Shock resistance per IEC 60068-2-27 40 g 6 ms mechanical shock Service life 10 million load cycles Free fall test Resistant to an impact onto concrete from 1 m Permissible temperatures Medium: -40 ... +100 °C Ambient: -25 ... +80 °C Storage: -25 ... +80 °C Other temperature ranges on request

slide 7:

Page 7 of 11 WIKA data sheet PE 81.65 ∙ 03/2013 Process connections Standard Thread size EN 837 G ⅛ B 2 G ¼ B G ¼ female G ⅜ B DIN 3852-E G ¼ A 1 3 4 M14 x 1.5 3 ANSI/ASME B1.20.1 ⅛ NPT 2 ¼ NPT 1 ¼ NPT female ISO 7 R ¼ 1 R ⅜ KS PT ¼ 1 PT ⅜ SAE 7/16-20 UNF BOSS 1 3 9/16-18 UNF BOSS 3 1 Optional: Pressure port with a diameter of 6 mm 0.6 mm 0.3 mm on request. 2 Maximum measuring range from 0 ... 400 bar. 3 Minimum permissible medium temperature -30 °C also for model O-10 5 4 Maximum overpressure limit 600 bar All process connections are available as standard with a pressure port of diameter 3.5 mm. Sealings Process connection per Standard Option DIN 3852-E NBR 1 FPM/FKM 2 SAE FPM/FKM 2 - 1 Minimum permissible medium and ambient temperature -15 °C 2 Minimum permissible medium and ambient temperature -30 °C The sealings listed under "Standard" are included in the delivery. Materials Non-wetted parts ■ Stainless steel 316L ■ PBT GF 30 ■ Cable material cable outlet PVC Wetted parts ■ Stainless steel 316L ■ 13-8 PH ■ For sealing materials see "Process connections" Oil and grease free versions are available on request.

slide 8:

WIKA data sheet PE 81.65 ∙ 03/2013 Page 8 of 11 Electrical connections ■ Model O-10 T Available connections Electrical connection Ingress protection Wire cross-section Cable diameter Cable lengths Angular connector DIN 175301-803 A IP 65 - - - Angular connector DIN 175301-803 C IP 65 - - - Circular connector M12 x 1 4-pin IP 67 - - - Metri-Pack series 150 1 IP 67 - - - Cable outlet unshielded 2 IP 67 0.14 mm 2 3.4 mm 2 m 5 m Cable outlet shielded IP 67 0.14 mm 2 4.3 mm 2 m 5 m 1 for model O-10 T only possible from measuring range 0 ... 60 bar 2 up to a maximum of 80 °C permitted The stated ingress protection per IEC 60529 only applies when plugged in using mating connectors that have the appropriate ingress protection. Mating connectors are not included in the delivery but they are available as accessories. Other connections on request. Short-circuit resistance S + vs. 0V Reverse polarity protection U B vs. 0V Overvoltage protection DC 36 V Insulation voltage DC 750 V ■ Model O-10 5 Available connections Electrical connection Ingress protection Wire cross-section Cable diameter Cable lengths Circular connector M12 x 1 4-pin IP 65 - - - Metri-Pack series 150 IP 67 - - - Cable outlet unshielded 1 IP 67 0.14 mm 2 3.4 mm 2 m 5 m 1 up to a maximum of 80 °C permitted The stated ingress protection per IEC 60529 only applies when plugged in using mating connectors that have the appropriate ingress protection. Mating connectors are not included in the delivery but they are available as accessories. Short-circuit resistance S + vs. 0V Reverse polarity protection U B vs. 0V Overvoltage protection DC 36 V Insulation voltage DC 750 V

slide 9:

Page 9 of 11 WIKA data sheet PE 81.65 ∙ 03/2013 with angular connector DIN 175301-803 A with angular connector DIN 175301-803 C with M12 x 1 circular connector Circular connector M12 x 1 1 2 3 2-wire 3-wire U B 1 1 0V 3 3 S+ - 4 Angular connector DIN 175301-803 A 1 3 2-wire 3-wire U B 1 1 0V 2 2 S+ - 3 Angular connector DIN 175301-803 C 1 3 2-wire 3-wire U B 1 1 0V 2 2 S+ - 3 Cable outlet shielded 1 3 2-wire 3-wire U B brown brown 0V blue blue S+ - black Cable outlet unshielded 1 2 3 2-wire 3-wire U B brown brown 0V green green S+ - white Metri-Pack series 150 1 2 3 2-wire 3-wire U B B B 0V A A S+ - C Weight: approx. 80 g Weight: approx. 80 g Weight: approx. 80 g Dimensions in mm Complete instrument Legend U B Positive power supply terminal 0V Reference potential S + Positive output terminal Connection diagrams 1 Applies to model O-10 T 2 Applies to model O-10 5 3 Version with connected shield on request

slide 10:

WIKA data sheet PE 81.65 ∙ 03/2013 Page 10 of 11 with cable outlet G L1 G ¼ A DIN 3852-E 14 M14 x 1.5 DIN 3852-E 14 G L1 G ¼ B EN 837 13 G ⅜ B EN 837 16 G L1 9/16-18 UNF BOSS 13 7/16-20 UNF BOSS 12 G L1 G ⅛ B EN 837 10 with Metri-Pack series 150 G L1 ⅛ NPT 10 ¼ NPT 13 R ¼ 13 R ⅜ 15 PT ¼ 13 PT ⅜ 15 G L1 L2 L3 D1 G ¼ 17 13 10 Ø 19 G L1 L2 D1 ¼ NPT 17 14 Ø 19 Weight: approx. 80 g Process connections Weight: approx. 80 g For information on tapped holes and welding sockets see Technical Information IN 00.14 at www.wika.com. Complete instrument

slide 11:

Page 11 of 11 WIKA data sheet PE 81.65 ∙ 03/2013 03/2013 GB WIKA Alexander Wiegand SE Co. KG Alexander-Wiegand-Straße 30 63911 Klingenberg/Germany T el. +49 9372/132-0 Fax +49 9372/132-406 E-mail infowika.de www.wika.de Ordering information Model / Measuring range / Output signal / Process connection / Electrical connection Accessories and spare parts Mating connector Designation Order number without cable with 2 m cable with 5 m cable Angular connector DIN 175301-803 A ■ with cable gland metric 11427567 11225793 11250186 ■ with cable gland conduit 11022485 - - Angular connector DIN 175301-803 C 1439081 11225823 11250194 Circular connector M12 x 1 4-pin ■ straight 2421262 11250780 11250259 ■ angled 2421270 11250798 11250232 Sealings for mating connectors Designation of the mating connector Order number Angular connector DIN 175301-803 A 1576240 Angular connector DIN 175301-803 C 11169479 Only use the accessories and spare parts listed above otherwise it could lead to the loss of the approval. CE conformity Pressure equipment directive 97/23/EC EMC directive 2004/108/EC EN 61326 emission group 1 class B and immunity industrial application RoHS conformity Y es Approvals ■ cULus safety e.g. electr. safety overpressure ... USA Canada ■ GOST-R import certifcate Russia Approvals see website

authorStream Live Help