Pipe Fitting Selection Guide from leading pipe fitting stockist in Ind


Presentation Description

Looking for Pipe Fitting Selection Guide... Have a look on this presentation.......


Presentation Transcript

Great Steel and Metals:

Pipe Fitting Selection Guide from leading Butt-weld fitting manufacturer in India Great Steel and Metals www.greatmetal.com

Slide 2:

If you are looking for pipe fittings but do not have the idea as which one  suits  your needs than  Great Steel & Metals ,  the leading Buttweld fitting manufacturer in India  are providing the selection guide using which you can select the pipe fittings as per the demands . www.greatmetal.com

Slide 3:


Slide 4:

www.greatmetal.com Pipe fittings Are available in various shapes, sizes and materials. Used to connect pipes of different lengths and sizes. Pipe and pipe-fittings are produced from a various materials for the transport of wide variety of solids and fluids. The wrong pipe fitting can lead to many problems like:

Slide 5:

www.greatmetal.com Leaks Unwanted flow restrictions and Extra cost The proper pipe fittings and flanges helps an e quipment  to do the work that you intend it to do. The various types of pipe fittings include plugs,  90 degree elbows, 45 degree elbows,  flanges, nipples, concentric, reducers, eccentric reducers,  straight tees and many more

Slide 6:

www.greatmetal.com Points to be considered : The integrity of any fitting for proper functioning depends upon the following : Selection of correct components or fittings appropriate for the application Careful preparation and cleaning Careful installation and assembly Correct tightening and loading

Slide 7:

www.greatmetal.com • One should consider below points to select pipe fittings : 1.  Determine Material Compatibility : Material selection plays a vital role in the proper working of fittings. There are certain fluids which are not compatible with fitting material and these fittings cause leakage or system damage . 2.  Check Temperature and Pressure Conditions : Appropriate temperature and pressure ratings are needed for proper operating conditions. It is necessary to know whether the fittings are capable of performing at their maximum temperature and maximum pressure ratings.

Slide 8:

www.greatmetal.com • Below are popular fitting types : 1.   Threaded Pipe Fittings : These are the most commonly used fittings based on certain standards. There are threaded fittings of pipes in BSP (British Standard Pipe), NPT (National Pipe Taper) sizes for high-pressure pipe connections . 2.  Socket Weld Fittings : A socket weld fitting is unthreaded, but has large sockets at both ends to accept a pipe end. The fitting is then permanently welded to the pipe . 3.  Butt Weld Fittings : Butt-weld fittings whose dimensions, dimensional tolerances et cetera are defined in the ASME B16.9 standards. Light-weight corrosion resistant fittings are made to MSS SP43.

Slide 9:

www.greatmetal.com 4.  Flanges : A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification . Pipe Thread Sizes : This is an important consideration for any pipe fitting. All pipes were manufactured with specification of a standardized outside diameter and wall thickness which in turn implies that the nominal pipe size is approximately equal to the inside diameter. Nowadays, various thread configurations are used.

Slide 10:

www.greatmetal.com Selection criteria for buyers Material Pressure Ratings Design and operation Safety information Some of these questions are as follows before purchasing 1. Can it handle pressure? 2. Can it handle high temperature? 3. Does it have proven long-term performance? 4. Are the joints or seals reliable? 5. Can it be fitted properly? 6. Does it have confidence of manufacturers? 7. Can it resist punctures and abrasion? 8. Does it have quality and value?

Slide 11:

www.greatmetal.com The more the number of “YES”, the better is your product. So these are the tips by  Great Steel & Metals  using which you can select the appropriate fittings for your needs.

Slide 12:


Slide 13:


authorStream Live Help