IEE Lec6

Download
Share  Add to  Flag Embed
Uploaded from authorPOINTLite
Views:
 
Category: Entertainment
     
 
License:   All Rights Reserved

Presentation Description

No description available.

Comments

 

By: umangshah (22 month(s) ago)

hiii i want to download this presentation so pls allow me to download it.....

 

By: duttta (40 month(s) ago)

hi Goldie myself duttta,ineed this ppt please allow me to download it...........pls......

Presentation Transcript

Lecture 6: 555 Timer: 

Lecture 6: 555 Timer Energy storage, Periodic Waveforms, and One of the most useful electronic devices

Examples of Physical Periodic Motion: 

Examples of Physical Periodic Motion Pendulum Bouncing ball Vibrating string (stringed instrument) Circular motion (wheel) Cantilever beam (tuning fork)

Other Periodic Phenomena: 

Other Periodic Phenomena Daily cycle of solar energy Annual cycle of solar energy Daily temperature cycle Annual temperature cycle Monthly bank balance cycle Electronic clock pulse trains Line voltage and current

Daily Average Temperature Albany-Troy-Schenectady: 

Daily Average Temperature Albany-Troy-Schenectady Data (blue) covers 1995-2002 Note the sinusoid (pink) fit to the data

Using Matlab to Produce Audio Signal from Daily Average Temps: 

Using Matlab to Produce Audio Signal from Daily Average Temps Data is normalized to mimic sound Data is filtered to find fundamental

Matlab Window: 

Matlab Window

Periodic Pulse Train from a 555 Timer: 

Periodic Pulse Train from a 555 Timer This circuit puts out a steady state train of pulses whose timing is determined by the values of R1, R2 and C1 The formula has a small error as we will see

Using Models: 

Using Models Recall that you should use a model that you understand and/or know how to properly apply To use it properly Check for plausibility of predicted values (ballpark test). Are the values in a reasonable range? Check the rate of changes in the values (checking derivative or slope of plot). Are the most basic things satisfied? Conservation of energy, power, current, etc. Developing a qualitative understanding of phenomena now will help later and with simulations.

Charging a Capacitor: 

Charging a Capacitor Capacitor C1 is charged up by current flowing through R1 As the capacitor charges up, its voltage increases and the current charging it decreases, resulting in the charging rate shown

Charging a Capacitor: 

Charging a Capacitor Capacitor Current Capacitor Voltage Where the time constant

Charging a Capacitor: 

Charging a Capacitor Note that the voltage rises to a little above 6V in 1ms.

Charging a Capacitor: 

Charging a Capacitor There is a good description of capacitor charging and its use in 555 timer circuits at http://www.uoguelph.ca/~antoon/gadgets/555/555.html

2 Minute Quiz Name___________ Section___ True or False?: 

2 Minute Quiz Name___________ Section___ True or False? If C1 < C2, for a fixed charging current, it will take longer to charge C1 than C2 If R1 < R2, for a fixed charging voltage, it will take longer to charge a given capacitor C through R1 than R2 When a capacitor C is connected to a battery through a resistor R, the charging current will be a maximum at the moment the connection is made and decays after that.

555 Timer : 

555 Timer At the beginning of the cycle, C1 is charged through resistors R1 and R2. The charging time constant is The voltage reaches (2/3)Vcc in a time

555 Timer: 

555 Timer When the voltage on the capacitor reaches (2/3)Vcc, a switch is closed at pin 7 and the capacitor is discharged to (1/3)Vcc, at which time the switch is opened and the cycle starts over

555 Timer: 

555 Timer The capacitor voltage cycles back and forth between (2/3)Vcc and (1/3)Vcc at times and

555 Timer: 

555 Timer The frequency is then given by Note the error in the figure

Inside the 555: 

Inside the 555 Note the voltage divider inside the 555 made up of 3 equal 5k resistors

555 Timer: 

555 Timer These figures are from the lab writeup Each pin has a name (function) Note the divider and other components inside

Astable and Monostable Multivibrators: 

Astable and Monostable Multivibrators Astable puts out a continuous sequence of pulses Monostable puts out one pulse each time the switch is connected

Astable and Monostable Multivibrators: 

Astable and Monostable Multivibrators What are they good for? Astable: clock, timing signal Monostable: a clean pulse of the correct height and duration for digital system

Optical Transmitter Circuit: 

Optical Transmitter Circuit Astable is used to produce carrier pulses at a frequency we cannot hear (well above 20kHz)

Optical Receiver Circuit: 

Optical Receiver Circuit Receiver circuit for transmitter on previous slide

Clapper Circuit: 

Clapper Circuit Signal is detected by microphone Clap is amplified by 741 op-amp Ugly clap pulse triggers monostable to produce clean digital pulse Counter counts clean pulses to 2 and triggers relay through the transistor

555 Timer Applications: 

555 Timer Applications 40 LED bicycle light with 20 LEDs flashing alternately at 4.7Hz

555 Timer Applications: 

555 Timer Applications 555 timer is used to produce an oscillating signal whose voltage output is increased by the transformer to a dangerous level, producing sparks. DO NOT DO THIS WITHOUT SUPERVISION

Tank Circuit: A Classical Method Used to Produce an Oscillating Signal: 

Tank Circuit: A Classical Method Used to Produce an Oscillating Signal A Tank Circuit is a combination of a capacitor and an inductor Each are energy storage devices

Tank Circuit: How Does It Work?: 

Tank Circuit: How Does It Work? Charge capacitor to 10V. At this point, all of the energy is in the capacitor. Disconnect voltage source and connect capacitor to inductor. Charge flows as current through inductor until capacitor voltage goes to zero. Current is then maximum through the inductor and all of the energy is in the inductor.

Tank Circuit: 

Tank Circuit The current in the inductor then recharges the capacitor until the cycle repeats. The energy oscillates between the capacitor and the inductor. Both the voltage and the current are sinusoidal.

Tank Circuit Voltage and Current: 

Tank Circuit Voltage and Current

Tank Circuit: 

Tank Circuit There is a slight decay due to finite wire resistance. The frequency is given by (period is about 10ms)

Tank Circuit: 

Tank Circuit Tank circuits are the basis of most oscillators. If such a combination is combined with an op-amp, an oscillator that produces a pure tone will result. This combination can also be used to power an electromagnet. Charge a capacitor Connect the capacitor to an electromagnet (inductor). A sinusoidal magnetic field will result. The magnetic field can produce a magnetic force on magnetic materials and conductors.

Tank Circuit Application: 

Tank Circuit Application In lab 9 we will be using the circuit from a disposable camera. We can also use this type of camera as a power source for an electromagnet.

Disposable Camera Flash Capacitor Connected to a Small Electromagnet: 

Disposable Camera Flash Capacitor Connected to a Small Electromagnet

Disposable Camera Flash Experiment/Project: 

Disposable Camera Flash Experiment/Project A piece of a paperclip is placed part way into the electromagnet. The camera capacitor is charged and then triggered to discharge through the electromagnet (coil). The large magnetic field of the coil attracts the paperclip to move inside of the coil. The clip passes through the coil, coasting out the other side at high speed when the current is gone.

Coin Flipper and Can Crusher: 

Coin Flipper and Can Crusher The can crusher device (not presently in operation) crushes a soda can with a magnetic field.

Can Crusher and Coin Flipper: 

Can Crusher and Coin Flipper This is an animation a student made as a graphics project a few years ago

Can Crusher and Coin Flipper: 

Can Crusher and Coin Flipper For both the can crusher and coin flipper, the coil fed by the capacitor acts as the primary of a transformer. The can or the coin acts as the secondary. A large current in the primary coil produces an even larger current in the can or coin (larger by the ratio of the turns in the primary coil) The current in the coin or can is such that an electromagnet of the opposite polarity is formed (Lenz’ Law) producing two magnets in close proximity with similar poles facing one another. The similar poles dramatically repel one another

Magnetic Launchers: 

Magnetic Launchers Coilguns/Railguns

Coilguns & Railguns: 

Coilguns & Railguns Two types of launchers are being developed for a variety of purposes.

Where Will You See This Material Again?: 

Where Will You See This Material Again? Electromagnetic Fields and Forces: Fields and Waves I 555 Timers: Many courses including Analog Electronics and Digital Electronics Oscillators: Analog electronics Clocks, etc: Digital Electronics, Computer Components and Operations, and about half of the ECSE courses.

Appendix: 

Appendix

Using Conservation Laws to Derive Fundamental Equations: 

Using Conservation Laws to Derive Fundamental Equations Energy stored in capacitor plus inductor Total energy must be constant, thus

Using Conservation Laws: 

Using Conservation Laws Simplifying This expression will hold if Noting that

Using Conservation Laws: 

Using Conservation Laws Note that for the tank circuit The same current I flows through both components The convention is that the current enters the higher voltage end of each component I + + VC VL

Using Conservation Laws: 

Using Conservation Laws Experimentally, it was also determined that the current-voltage relationship for a capacitor is Experimentally, it was also determined that the current-voltage relationship for an inductor is

Using Conservation Laws: 

Using Conservation Laws Applying the I-V relationship for a capacitor to the expressions we saw before for charging a capacitor through a resistor We see that

Using Conservation Laws: 

Using Conservation Laws Simplifying Which is satisfied if The latter is the relationship for a resistor, so the results work.