Presentation Transcript
Monterey Bay Experiment Plan: Monterey Bay Experiment Plan COAST
Monterey Experiment to Collect Simulated HES-CW data : Monterey Experiment to Collect Simulated HES-CW data There are no existing data sets that include all the key attributes of HES-CW data:
Spectral coverage (.38 – 1.0 mm)
High signal-to-noise ratio (>300:1 prefer >900:1, for ocean radiances for 300 m binned data)
High spatial resolution (<150 m, bin to 300 m)
Hourly or better revisit
Propose field experiments in FY2006-2008 to develop the required data sets for HES-CW algorithm and model development.
Airborne system:
Hyperspectral imager that can be binned to the HES-CW bands
Flown at high altitude for minimum of 10 km swath
Endurance to collect repeat flight lines every half hour for up to 6 hours
SAMSON
Proposed experimental site:
August-September 2006 Monterey Bay (coastal upwelling, HABs)
Monterey Experiment to collect simulated HES-CW data : Monterey Experiment to collect simulated HES-CW data Experimental Design
Choose sites with IOOS or other long term monitoring and modeling activities
Intensive effort for 2 weeks to assure that all essential parameters are measured:
Supplement standard measurements at the site with shipboard or mooring measurements of water-leaving radiance, optical properties and products expected from HES-CW algorithms,
Additional atmospheric measurements as needed to validate atmospheric correction parameters,
As needed, enhance modeling efforts to include bio-optical models that will utilize HES-CW data.
Aircraft overflights for at least three clear days and one partially cloudy day (to evaluate cloud clearing) during the two week period.
High altitude to include 90% or more of the atmosphere
30 min repeat flight lines for up to 6 hours to provide a time series for models and to evaluate changes with time of day (illumination, phytoplankton physiology, etc.)
All data to be processed and then distributed over the Web for all users to test and evaluate algorithms and models.
Experiment Resources: Experiment Resources Aircraft for 6 flight days 6 hrs per day.
R/V John Martin 7 ship days?
Small boats for the entire two weeks?
Lab space (14C, HPLC, pad absorptions, instrument prep, etc.
Space for basing the gliders?
Space for instrument repair and calibration.
Space for basing the aircraft?
Space for daily group meeting in evening to review data and plan next day experiment?
Lodging, motels or rent a house or some of both
One Day in the Experiment: One Day in the Experiment Assume clear morning and sunrise at 0700
Aircraft takes off at 0700
First data at 0730
Repeat 20 km square (approximately ½ of the Bay) every 30 min
0730, 0800, 0830, 0900
Skip one repeat and do staked collection
1000,1030,1100,1130,1200
Additional measurements for atmospheric correction, etc.
Land at 1300
R/V Martin
Occupy one Station for profiles for each overflight?
Alternatively underway data collection or combination of stations every other overflight and underway in between.
Glider collecting underway data.
Mooring data
Seagrass beds should be part of the overflight area.
Data processed and in data system in 48? Hrs. Models later.
Atmospheric Measurements: Atmospheric Measurements NRL Monterey lidar, etc.
UCSC
Sun Photometers on ship
Aircraft staked measurements
Other sensors on aircraft?
Airborne Measurements: Airborne Measurements Paul Bissett (FERI, 2 people on plane)
SAMSON
Cover 20 x 20 km area (roughly ½ the Bay) in 28 min.
6 hr flight, repeat every 30 min, except for special staked imaging, or other for atmospheric correction.
Data binned to 10 m spatial and 10 nm spectral resolution (or HES-CW channels.
Data geolocated
Data calibrated
Data atmospherically corrected using Tafkaa (Marcos Montes, NRL )
Airport for plane?
lab space for processing system including two operators (FERI) and 1 NRL (for atmospheric correction) for data processing and analysis?
Gliders: Gliders Oscar Schofield (launch from a small boat)
Particle Glider
In-Water Optics: In-Water Optics Bob Arnone (NRL group, 2 people on ship)
POWR IOP profiling package
Filtered and unfiltered a-c9s
a-cS
Hydroscatt-6
CTD
Water bottles
fluorometer
CDOM fluorometer
Above water remote sensing reflectance
Water samples are available for HPLC, etc. but NRL will not be doing those measurements.
Ken Voss (1) NURADS
Mike Ondrusek (1) AOPs
Chlorophyll, fluorescence and productivity: Chlorophyll, fluorescence and productivity Ricardo Letelier (2)
Heidi Sosik (1)
On the R/V John Martin:
FRRF (flow thru mode) and PAM (discrete mode)
FLH
Imaging flow system
Water samples collected, filtered and frozen for:
HPLC pigments
Chlorophyll fluorometry
Filter absorption pads
POC?
Nutrients (Kudela)
14C productivity, P vs. I curves?
Benthic productivity: Benthic productivity Heidi Dierssen
Independent in Small Boat
Seagrass productivity
Kelp?
Coastal Carbon Budget: Coastal Carbon Budget Pete Strutton
One person on R/V Martin
Flow though PCO2 system
one on shore
R/V John Martin: R/V John Martin NRL (2 people)
IOP profiling package
Above Water Rrs
Water samples for Chl, Pad absorptions productivity, etc.
Voss (1 person) NURADS
Ondrusek (1 person) AOPs
Sosik (1 person)
Imaging flow system
Letelier (1 person)
14C productivity
FRRF underway, FLH, chlorophyll fluorometry,
Strutton (1 person)
Underway PCO2 (maintain underway system)
Kudela (1 person)
Underway system
Nutrients from bottles (shore lab)
Chief Scientist?
Total 8-9
R/V John Martin Wire Time: R/V John Martin Wire Time POWR package and water retrieval (15 min)
Can operate as a free fall package or on a wire
NURADS floats away from the ship (2 min to deploy and recover)
HTSRB floats away from the ship (2 min to deploy and recover)
APO profiler (10 min?)
Others?
R/V John Martin Water: R/V John Martin Water For each bottle sample depth need water for:
HPLC (50 mls)
Fluorometric Chlorophyll (50 mls)
Filter pad absorptions (200 mls)
POC (500 mls)
Suspended Sediments (500 mls)
Nutrients (50 mls)
Microscopy (50 mls)
14C productivity (200 mls)
Additional Small Boats: Additional Small Boats Dierssen
Seagrasses and kelp
Schofield
Gliders
Others??
Lab Requirements: Lab Requirements
Space to store and process samples for:
Pigments
Fluorometric
HPLC
14C productivity
Nutrients
Pad absorptions
POC
Suspended Sediments
Flow Cytometer
Others??
Ship instrument preparation and service
Glider preparations and service.
Space for data analysis and processing ship, and aircraft data.
Where will we have lab space?
Bio-Optical Models: Bio-Optical Models John Kindle (NRL)
Others??
Demo Data System: Demo Data System Paul BIssett (FERI) to host, OSU (Letelier) to have mirror site
SAMSON data
Geolocated
Calibrated
Atmospherically corrected
binned to 10 m GSD and 10 nm spectral (or HES-CW channels)
In-water data
All types
Geolocated to the images
Atmospheric data
Links to associated data from existing moorings, models, etc.
HABs: HABs Identify HABs during experiment and link to the experimental data.
Look for unique signature, algorithm to identify HABs from the data collected
Feed into the development of HAB models