1 Opportunities

Opportunities for Growing, Utilizing & Marketing Bio-Fuel Pellets: 

Opportunities for Growing, Utilizing & Marketing Bio-Fuel Pellets Roger Samson REAP-CANADA Resource Efficient Agricultural Production-Canada Box 125, Ste. Anne de Bellevue, Quebec, H9X 3V9 Tel: (514) 398-7743; Fax: (514) 398-7972 rsamson@reap-canada.com; www.reap-canada.com

REAP-Canada: 

REAP-Canada A leading international agency dedicated to the development of ecological energy, fibre and food production systems A world leader in research and development of agricultural bio-fuels and bio-energy conversion systems Community-based Development Projects in China, the Philippines and West Africa

To economically provide large amounts of renewable energy from biomass we must:: 

To economically provide large amounts of renewable energy from biomass we must: As efficiently as possible capture solar energy over a large area Convert this captured energy as efficiently as possible into a convenient and low cost end use application SO WHAT ARE OUR OPTIONS?

Canada’s Surplus Wood Residues (1990-1998) (Hatton 1999): 

Canada’s Surplus Wood Residues (1990-1998) (Hatton 1999)

C3 vs C4 Plants as Biomass Crops: 

C3 vs C4 Plants as Biomass Crops C3 Plants Greater chilling tolerance Tolerant of imperfectly drained soils Utilizes solar radiation effectively in spring and fall C4 Plants Responsive to warming climate Greater water use efficiency Utilizes solar radiation effectively at high temperatures Modest levels of ash

Water as a factor limiting yield: 

Water as a factor limiting yield Ontario and Quebec receive 1000 mm/yr Assumption that 40% of water is available for crop growth: 400 mm/yr Assume C4 species use 20 mm/tonne Assume C3 species use 40 mm/tonne Maximum yield C4 species: 400/20 = 20 tonnes Maximum yield C3 species: 400/40 = 10 tonnes

Introduction to switchgrass: 

Introduction to switchgrass Fast growing warm season perennial grasses have been identified as ideal candidates for biomass fuel production due to their high net energy yield per hectare and low cost of production. Switchgrass (Panicum virgatum), is an ideal biomass energy source because of its moderate to high productivity, stand longevity, high moisture and nutrient use efficiency, low cost of production and adaptability to most agricultural regions in North America. Switchgrass has an energy output to input ratio of approximately 20:1and can typically produce 185 GJ of energy per 10 tonnes of biomass from land that is often of marginal crop producing value. Switchgrass can be densified into a pelletized biofuel and used for space heating purposes with a close couple gasifier pellet stove. This energy pathway was evaluated with support from Natural Resources Canada.

Desirable Characteristics of Switchgrass as a Biomass Crop: 

Moderate to high productivity Low maintenance Tolerates acidic soils Stand longevity Low NPK requirements Moisture efficient Soil restoring properties Desirable Characteristics of Switchgrass as a Biomass Crop

Economics of Switchgrass Production: 

Economics of Switchgrass Production Fall harvesting $41-57CDN/tonne Spring harvesting $46-68CDN/tonne

Native Range of Selected C4 Grasses: 

Native Range of Selected C4 Grasses

Farmland in North America and Potential for Biofuel Production: 

* Estimated 13.9% land converted to bioenergy grasses ** Assumed hay yields of 5.9 tonne/ha in Canada, 8.1 tonne/ha U.S Farmland in North America and Potential for Biofuel Production

Comparative Costs of Hay Prices vs. Residential Heating Costs in Manitoba: 

Comparative Costs of Hay Prices vs. Residential Heating Costs in Manitoba

Slide16: 

Modernizing the Bioenergy Heat Production Chain Energy crop Pellet fuel Stove Boiler Heating Cooking

PFI Pellet Fuel Quality Standards: 

PFI Pellet Fuel Quality Standards Premium (<1% ash) vs. Standard (3% ash) Density: 40 pounds per cubic ft. Dimensions: Maximum 1.5 inches in length Diameter ¼ or 5/16 in. Fines: Maximum 0.5% by weight Chlorides: Maximum 300 ppm

Biomass quality of switchgrass as a combustible biofuel: 

Biomass quality of switchgrass as a combustible biofuel The formation of clinker is a concern when combusting herbaceous feedstocks such as switchgrass pellets. Overwintering switchgrass reduces the potassium and chlorine content which improves overall biomass quality. Switchgrass biomass quality is also better when grown on sandy soils. Spring harvested switchgrass has an ash content of approximately 3-3.5%. It has an energy content of 19.2 GJ/tonne, only 3% lower than wood and 7% greater than wheat straw. The densification of switchgrass into fuel pellets eases the combustion and handling problems normally associated with the bulky nature of biomass.

Production and economics of switchgrass pellets: 

Production and economics of switchgrass pellets In terms of pelleting, switchgrass behaves similarly to alfalfa, and it is significantly easier to pellet than hardwood or softwood fibre sources. The use of switchgrass as a pelleting material can reduce pellet production costs by increasing the throughput of a 150HP pellet machine to 6.9-10.9 tonnes/hr compared to 3.1 for hardwood and 4.5 for softwood. Switchgrass is an economically attractive feedstock as it requires minimal drying compared to wood. Switchgrass pellets can be produced in closer proximity to more densely populated areas than can wood fuel pellets, thus reducing transportation costs and making bulk handling more feasible.

Summary of preliminary feedstock production costs ($CDN/tonne)a: 

Summary of preliminary feedstock production costs ($CDN/tonne)a aDirect pelleting costs are based on: 30 lbs./hr/HP (177.6 kg/hr/MJ) for wood residues 45-70 lbs/hr/HP (266 – 414 kg/hr.MJ) for switchgrass

The Dell-Pointe Pellet Stove: 

The Dell-Pointe Pellet Stove This close coupled gasifier pellet stove was designed to efficiently burn moderately high ash fuels and feed grains

Combustion performance of switchgrass fuel pellets: 

Combustion performance of switchgrass fuel pellets Dell-Point Technologies (Blainville, QC), in partnership with the Natural Resources Canada Advanced Combustion Laboratory, has developed a close couple gasification pellet stove with an overall efficiency of 81-87%. The stove design is such that a lower operating temperature exists in the bottom of the gasifier where the first stage of the combustion occurs. The ash is slowly augered out allows the ash to remain in the auger fall through the grate into the ash pan, thus reducing clinker production. Burning switchgrass provided an efficiency of 82%-84% when tested by the CANMET combustion laboratory. Grains (including rye, barley, oats, wheat and corn) are now also being burnt Dell-Pointe Stove. Particulate levels from switchgrass combustion were greater than those obtained for wood, with peak levels of 2.5 g/hour at the high range setting. However, the values were well below the 7 g/hour EPA limit for pellet stoves.

Reducing heating costs and CO2 emissions with switchgrass biofuel pellets: 

Reducing heating costs and CO2 emissions with switchgrass biofuel pellets In North America, biomass energy from grass pellets and crop residues could play an important role in reducing the economic and environmental costs associated with fossil fuel use. The rising price of heating oil and natural gas will increasingly make the replacement of these fuels with biomass energy more financially attractive to consumers. The bottom line is that relative to heating oil systems, switchgrass pellets have the potential to reduce fuel heating costs and greenhouse gas emissions by approximately 30% and 90% respectively.

Fuel costs and CO2 emissions associated with home heating in S.W. Quebec: 

Fuel costs and CO2 emissions associated with home heating in S.W. Quebec Home heating cost ($Cdn) CO2 emissions (kg)

Slide28: 

Assumptions: Electricity has an energy content of 3.6 MJ/kWh, a delivered fuel value of 6.87 cents/kWh, a C02 loading value of 52.2 kg C02/GJ and is converted at 98% efficiency, Approximate Canadian electrical mix: 63% hydro-power, 15% nuclear, 16.5% coal, 3% oil, 2% natural gas Heating Oil has an energy content of 0.0382 GJ/l, a delivered fuel value of 46.01 cents/l, a C02 loading value of 81.8 kg C02/GJ, and is converted at 82% efficiency Natural Gas has an energy content of 0.0375 GJ/m3 ,a delivered fuel value of 47.85 cents/ m3, a C02 loading value of 50.6 kg C02/GJ, and is converted at an average efficiency of 85% Bagged Wood Pellets have an energy content of 19.8 GJ/tonne, a delivered fuel value of $207/tonne, a C02 loading value of 5.3 kg C02/GJ, and are converted at 82% efficiency Bulk Switchgrass Pellets have an energy content of 19.2 GJ/tonne, a delivered fuel value of $172/tonne, a C02 loading value of 5.3 kg C02/GJ, and are converted at 82% efficiency. All delivered fuel values include taxes of 7% GST and 7.5% TVQ. Heat estimates made for a new detached 2000 sq. foot home with a heat requirement of 100 GJ. The analysis does not include capital costs associated with equipment.

Switchgrass production and pelleting: Energy analysis: 

Switchgrass production and pelleting: Energy analysis Pellet conversion facilities are much smaller (200 tonne/day) than other large biomass processing industries (1500 tonne/day), and thus can be located in closer proximity to the site of switchgrass production. If 5%of the landscape is converted to switchgrass and a harvestable yield of 10 tonne/ha is obtained, switchgrass can be sourced within a 20 km radius of a pelleting plant, versus a 60 km radius for a large industrial user. This shorter radius would reduce the energy used in delivery by approximately 2/3. Due to the difference in hauling differences, the total energy cost of switchgrass production for a large industrial user is estimated to be 0.91GJ/tonne, while that of a pellet plant is 0.79 GJ/tonne.

Energy inputs and outputs associated with of switchgrass as a pelleted biofuel: 

Energy inputs and outputs associated with of switchgrass as a pelleted biofuel

Net Energy Gain and Land Use Efficiency: 

Net Energy Gain and Land Use Efficiency

Conclusions: 

Conclusions Converting switchgrass into heat, using close coupled gasifier stoves and furnaces, is proposed as the biofuel system with the greatest potential to produce useful net energy from agricultural land and to displace oil imports with the least government intervention. This energy transformation pathway appears to accurately fit the definition of a ‘soft energy path’, due to its following characteristics: It is powered by a renewable source of energy It provides power sources which are multiple, small-scale and local, rather than few, large-scale and distant It is a flexible and comparatively low technology system, facilitating its understanding and utilization Is matched in terms of both scale and energy quality to its end-use application.