Li-Fi

Views:
 
     
 

Presentation Description

Li-fi Technology

Comments

Presentation Transcript

PowerPoint Presentation:

Sunday, April 14, 2013 1 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Its Working is much simply explained as follows: If the LED is on, the digital 1 is transmitted. And if it is off, the digital 0 is transmitted. It is possible to encode data in the light by varying the rate at which the LEDs flicker on and off to give different strings of 1s and0s. Sunday, April 14, 2013 2 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Sunday, April 14, 2013 3 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Li- Fi product consists of 4 primary sub- assemblies: Bulb RF power amplifier circuit (PA) Printed Circuit Board (PCB) Enclosure Sunday, April 14, 2013 4 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

The PCB controls the electric inputs and outputs of the lamp and houses the microcontroller used to manage different lamp functions. An RF (radio-frequency) signal is generated by the solid-state PA and is guided into an electric field about the bulb. Sunday, April 14, 2013 5 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

The high concentration of energy in the electric field vaporizes the contents of the bulb to a plasma state at the bulb’s center; this controlled plasma generates an intense source of light. All of these sub-assemblies are contained in an aluminium enclosure. Sunday, April 14, 2013 6 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Sunday, April 14, 2013 7 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Li- Fi is a term of one used to describe visible light communication technology applied to high speed wireless communication. It acquires this name due to the similarity to Wi - Fi , only using light instead of radio. Sunday, April 14, 2013 8 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Wi-Fi is great for general wireless coverage within buildings, and Li- Fi is ideal for high density wireless data coverage in confined area and for relieving radio interference issues, so the two technologies can be considered complimentary. Sunday, April 14, 2013 9 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Technology Speed Data density Wierless (current) Wi -F-IEEE 150Mbps * 802.11n Bluetooth 3Mbps * IrDA 4Mbps *** Sunday, April 14, 2013 10 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Technology Speed Data density Wireless (future) Wi -Gig 2Gbps ** Giga-IR 1Gbps *** Li- Fi 1Gbps **** Sunday, April 14, 2013 11 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Li- Fi technology is based on LEDs for the transfer of data. The transfer of the data can be with the help of all kind of light i.e Light may be Invisible, Ultraviolet or Visible part of spectrum. The speed of the internet is incredibly high and the user everything in just a few minutes. Sunday, April 14, 2013 12 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Sunday, April 14, 2013 13 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Some of the applications of Li- Fi are given below: Medical field Airlines Power plant Military operations Under sea water Sunday, April 14, 2013 14 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

Used for modern medical instruments. Used in petroleum or chemical plants where other transmission or frequencies could be hazardous. Thousands and millons of street lamps can be transferred to Li- Fi lamps to transfer data. Sunday, April 14, 2013 15 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

It is possible to achieve more than 10Gbps, theoretically allowing a high-definition film to be downloaded in 30sec. Mostly powered by LEDs so it is cost efficient. Transmission of data is fast and easy. Sunday, April 14, 2013 16 Deepak Khare MCA Submit By:Tinku Sir

PowerPoint Presentation:

The concept of Li- Fi is currently attracting a great deal of interest, not least because it may offer a genuine and efficient alternative to radio-based wireless. As a growing number of people and their devices access wireless internet, the air waves are becoming increasingly clogged, making it more and more difficult to get a reliable, high-speed signal. Sunday, April 14, 2013 17 Deepak Khare MCA Submit By:Tinku Sir