gpsintro

Slide1 : Introduction to the Global Positioning System Pre-Work GPS for Fire Management - 2004


Pre-Work Objectives : Describe at least three sources of GPS signal error, and identify ways to mitigate or reduce those errors. Identify the three segments of the Global Positioning System and describe the purpose of each. Describe two technologies that enhance the accuracy of GPS positioning and collected position data. Describe the process a GPS receiver uses to triangulate its position. Identify the four main functions of the GPS. Successfully complete the Pre-Work Test. Pre-Work Objectives


Unit A Lesson 1 Pre-Work Outline : A brief history of the Global Positioning System Segments of the GPS A primer on how the GPS works Problems with the GPS Advancements in the GPS Unit A Lesson 1 Pre-Work Outline


The History of GPS : The History of GPS


How the GPS Works : How the GPS Works


Three Segments of the GPS : Control Segment Space Segment User Segment Three Segments of the GPS Monitor Stations Ground Antennas Master Station


Control Segment : Kwajalein Atoll US Space Command Control Segment Hawaii Ascension Is. Diego Garcia Cape Canaveral


Space Segment : Space Segment


User Segment : Military. Search and rescue. Disaster relief. Surveying. Marine, aeronautical and terrestrial navigation. Remote controlled vehicle and robot guidance. Satellite positioning and tracking. Shipping. Geographic Information Systems (GIS). Recreation. User Segment


Four Primary Functions of GPS : Position and coordinates. The distance and direction between any two waypoints, or a position and a waypoint. Travel progress reports. Accurate time measurement. Four Primary Functions of GPS


Position is Based on Time : Position is Based on Time T + 3 Then distance between satellite and receiver = “3 times the speed of light” T Radio waves travel at the speed of light. If GPS signal leaves satellite at time “T”… …and is picked up by the receiver at time “T + 3.”


Pseudo Random Noise Code : Pseudo Random Noise Code Receiver PRN Satellite PRN Time Difference


What Time is it Anyway? : What Time is it Anyway? Zulu Time Military Time (local time on a 24 hour clock) Universal Coordinated Time Greenwich Mean Time Local Time: AM and PM (adjusted for local time zone) GPS Time - 13* * GPS Time is currently ahead of UTC by 13 seconds.


Signal From One Satellite : Signal From One Satellite The receiver is somewhere on this sphere.


Signals From Two Satellites : Signals From Two Satellites


Three Satellites (2D Positioning) : Three Satellites (2D Positioning)


Triangulating Correct Position : Triangulating Correct Position


Three Dimensional (3D) Positioning : Three Dimensional (3D) Positioning


Selective Availability (S/A) : Selective Availability (S/A) The Defense Department dithered the satellite time message, reducing position accuracy to some GPS users. S/A was designed to prevent America’s enemies from using GPS against us and our allies. In May 2000 the Pentagon reduced S/A to zero meters error. S/A could be reactivated at any time by the Pentagon.


Sources of GPS Error : Sources of GPS Error Standard Positioning Service (SPS ): Civilian Users Source Amount of Error Satellite clocks: 1.5 to 3.6 meters Orbital errors: < 1 meter Ionosphere: 5.0 to 7.0 meters Troposphere: 0.5 to 0.7 meters Receiver noise: 0.3 to 1.5 meters Multipath: 0.6 to 1.2 meters Selective Availability (see notes) User error: Up to a kilometer or more Errors are cumulative and increased by PDOP.


Sources of Signal Interference : Sources of Signal Interference


Receiver Errors are Cumulative! : Receiver Errors are Cumulative!


GPS Dilution of Precision and Its Affects On GPS Accuracy : GPS Dilution of Precision and Its Affects On GPS Accuracy


GPS Satellite Geometry : GPS Satellite Geometry Satellite geometry can affect the quality of GPS signals and accuracy of receiver trilateration. Dilution of Precision (DOP) reflects each satellite’s position relative to the other satellites being accessed by a receiver. There are five distinct kinds of DOP. Position Dilution of Precision (PDOP) is the DOP value used most commonly in GPS to determine the quality of a receiver’s position. It is usually up to the GPS receiver to pick satellites which provide the best position triangulation. More advanced GPS receivers can filter out poor DOP values.


Ideal Satellite Geometry : Ideal Satellite Geometry N S W E


Good Satellite Geometry : Good Satellite Geometry


Poor Satellite Geometry : Poor Satellite Geometry N S W E


Poor Satellite Geometry : Poor Satellite Geometry


Differential GPS : Differential GPS Realtime Post process


Real Time Differential GPS : True coordinates = x+0, y+0 Correction = x-5, y+3 DGPS correction = x+(30-5) and y+(60+3) True coordinates = x+25, y+63 Real Time Differential GPS


Slide31 : USCG NDGPS Ground Stations National Differential Global Positioning System Yellow areas show overlap between NDGPS stations. Green areas are little to no coverage. Topography may also limit some areas of coverage depicted here.


Slide32 : USCG NDGPS Ground Stations National Differential Global Positioning System Yellow areas show overlap between NDGPS stations. Green areas are little to no coverage. Topography may also limit some areas of coverage depicted here.


Slide33 : Wide Area Augmentation System Geostationary WAAS satellites GPS Constellation WAAS Control Station (West Coast) Local Area System (LAAS) WAAS Control Station (East Coast)


Slide34 : How good is WAAS? With Selective Availability set to zero, and under ideal conditions, a GPS receiver without WAAS can achieve fifteen meter accuracy most of the time.* Under ideal conditions a WAAS equipped GPS receiver can achieve three meter accuracy 95% of the time.* * Precision depends on good satellite geometry, open sky view, and no user induced errors.