winac e

Slide1: 

PC- based Control All about SIMATIC WinAC Automation and Drives

Innovation in PC technology: 

Innovation in PC technology Automation technology will participate in the rapid innovation in PC technology! Why PC-based Automation?

Integration of automation solution on a hardware platform: 

Integration of automation solution on a hardware platform on one single PC Cost reduction through integration of Why PC-based Automation?

Openness of PC technology: 

Openness of PC technology open standards Increased flexibility through use of Why PC-based Automation?

Totally Integrated Automation: 

Totally Integrated Automation PC-based Control with SIMATIC

Engineering with STEP 7: 

Technische Folien Engineering with STEP 7 Re-use of available SIMATIC Know how PC-based Control with SIMATIC

Standard interface inclusive : 

Technical slides Standard interface inclusive Production visualization SIMATIC WinCC flexible Process visualization SIMATIC WinCC Visualization system on Windows 3rd party SIMATIC communication WinAC PC-based Control with SIMATIC

SIMATIC NET OPC: 

SIMATIC NET OPC Improved Performance (about 5x – 10x) Improved Configuration with STEP7 Variable-Browsing OPC-Interfaces: Data Access Alarms&Events Successor of SIMATIC Computing PC with Windows PC Internal CP WinAC … New SIMATIC WinAC features

Multi-PLC Support: 

Multi-PLC Support Reduced HW-cost, reduced space (less PCs) Communication using BSEND/BRCV Distributed control power < 4 WinAC Slot PLC 1 WinAC Software PLC + < 3 WinAC Slot PLC External Power Supply: 1 PS Extension Board per WinAC Slot required New SIMATIC WinAC features

More Motion Solutions with WinAC Slot: 

More Motion Solutions with WinAC Slot FM 353/354 Support of additional FMs: FM 353: Stepper Motor FM 354: Servo Motor Point to point positioning Complex traversing patterns Motion control solutions with SIMOVERT MASTERDRIVES Electronic Gear ET200M MASTERDRIVES New SIMATIC WinAC features

Operation with Simple PC User Privileges: 

Operation with Simple PC User Privileges Installation: Admin or Local Admin privileges required Operation: User or Power User privileges sufficient RUN/STOP/MRES Read diagnostic buffer Restoring of archive files Tuning Safety: Panel pass word New SIMATIC WinAC features

Firmware-Update via File: 

Firmware-Update via File Start FW update via menu command No more memory card needed No more creation of „update memory card“ with STEP7 Note: new HW release 3 required Upgrade of HW for existing WinAC Slot PLCs required FW Update ... New SIMATIC WinAC features

WinAC PN Option für WinAC Basis: 

WinAC PN Option für WinAC Basis Modular, distributed Automation with WinAC Basis Integration of PROFInet into WinAC standard products Used for Component based Automation Replacement of WinAC PN V1.1 Option package for WinAC Basis Ethernet PROFIBUS Components with distributed I/O on PROFIBUS New SIMATIC WinAC features

Performance for WinAC Software PLCs: 

Performance for WinAC Software PLCs Notes for Measurement: 32000 Operations (32 loops à 1000) Performance values depending on processor type! Performance values depending on program structure! 1,2 GHz Celeron 3 GHz Xeon (P4) New SIMATIC WinAC features

Integration of T-Kit und ODK:WinAC ODK V4.1: 

Integration of T-Kit und ODK: WinAC ODK V4.1 One C/C++ engineering package forr WinAC Software and Slot PLCs Wizard supported programming for run-time interfaces for WinAC Software and Slot PLCs: ODK V4.1 Microsoft Visual Studio Soft Slot Wizard New SIMATIC WinAC features

WinAC ODK V4.1: 

WinAC ODK V4.1 WinAC Software PLC V4.1 WinAC Slot PLC V3.4 CCX SMX CMI SMX CMI T-Kit DLL WinAC Slot T-Kit V3.3 Custom Application (C/C++) WinAC ODK V4.0 Custom Application (C/C++) WinAC ODK V4.1 Custom Application (C/C++) New SIMATIC WinAC features

CCX: Custom Code Extension Interface: 

CCX: Custom Code Extension Interface Backward compatible to existing ODK Interface New: Operand Access –access to WinAC data at any time Programming with Visual Developer‘s Studio .net Compatibility WinAC ODK V4.0 can still be used with WinAC Basis/RTX V4.1 Applications created with WinAC ODK V4.0 can be used with WinAC Basis/RTX V4.1 without any restrictions Applications created with WinAC Basis/RTX ODK V3.0 can be used with WinAC V4.1 with the same restrictions as with WinAC Basis/RTX V4.0 New SIMATIC WinAC features

SMX: Shared Memory Extension Iterface: 

SMX: Shared Memory Extension Iterface Enhancement of T-Kit interface New: Simplified DLL interface Supports Multi-CPU operation Support of WinAC Software PLCs planed Compatibility: WinAC Slot T-Kit V3.3 can be used with WinAC Slot V3.4 Applications created with WinAC Slot T-Kit V3.3 can be used with WinAC Slot V3.4 w/o restrictions; WinAC Slot will provide a “Compatibility DLL” New SIMATIC WinAC features

CMI: Controller Management Interface: 

CMI: Controller Management Interface New: enables integration of WinAC CPU Panel functionality into a custom application RUN/STOP/LED-status Archiving/reloading of PLC programs Start and shutdown of the PLC Examples: Complete integration of CPU Panel functions into a HMI application („Service- und Maintenance pages“) Remote CPU Panel Implementation of specific user rights Automatic reloading of PLC program updates New SIMATIC WinAC features

Overview new WinAC Features: 

Overview new WinAC Features WinAC Soft WinAC Slot New SIMATIC WinAC features

SIMATIC WinAC Basis V4.1: 

Technical slides SIMATIC WinAC Basis V4.1 Based on native Windows standard I/O connection via PROFIBUS-DP (12 Mbit/s) Retentive data with UPS support (UPS = uninterruptible power supply) Full utilization of PC memory Saving of data and program on hard disk Highest flexibility for the automation solution through integration of windows-applications Product overview

SIMATIC WinAC RTX V4.1: 

Technical slides SIMATIC WinAC RTX V4.1 For applications with high requirements to determinism and real-time behavior Based on standard Windows NT and Real Time eXtension from VenturCom I/O connection using PROFIBUS DP card (12 Mbit/s) Up to four PROFIBUS lines possible Retentive data with UPS support (UPS = uninterruptible power supply) Utilization of PC main memory Saving of data and program on hard disk Product overview

SIMATIC WinAC Slot V3.4: 

Technical slides SIMATIC WinAC Slot V3.4 Available in two versions: WinAC Slot 412-2DP (128 kB per code/data) WinAC Slot 416-2DP (1.6 MB per code/data) Control independent of Windows 2000 or Windows XP Set of commands and performance correspond to the powerful S7-400 CPUs Data retention through battery backup Two DP interfaces onboard Optional 24 V power supply Product overview

SIMATIC WinAC ODK 4.1: 

Technical slides SIMATIC WinAC ODK 4.1 SIMATIC WinAC ODK is an engineering package which supports the development of C/C++ applications for WinAC Software and Slot PLCs. Extend the WinAC control-functionality Accelerate the Data-Interchange Integration of PC-Soft and Hardware into WinAC Product overview

World of PC-based Automation: 

World of PC-based Automation World of PC-based Automation

3rd party add-ons: 

3rd party add-ons Incorporation of other fieldbuses Integration of various data formats Linking of automation technology and instrumentation World of PC-based Automation Other vendors use WinAC's openness to achieve integration into the SIMATIC automation concept!

PC-based Competence Centers: 

PC-based Competence Centers Support Worldwide project support for implementation of your solution from feasibility analysis up to implementation!

Internet / knowledge base: 

Internet / knowledge base Support The latest information on PC-based Automation from Siemens can always be found here

Slide29: 

PC- based Control The Integration-Plattform for your PC-based Solution Automation and Drives