TRANS WP29 GRSP 38 inf12e

Views:
 
Category: Entertainment
     
 

Presentation Description

No description available.

Comments

Presentation Transcript

Slide1: 

Atsuhiro Konosu Japan Automobile Research Institute / Chairperson of Flex-TEG Flex PLI Technical Evaluation Group (Flex-TEG) Status Report Informal document No. GRSP 38-12 (38th GRSP, 6-9 December 2005, agenda item A.1.) Transmitted by the expert from Japan

Slide2: 

Contents 1. Delegations 2. Tasks 3. Activities 4. Schedule

Slide3: 

1. Delegations (appointed members) Governmental Parties EU/EEVC: D. Cesari, C. Masson (INRETS) Germany: B. Lorenz, O. Zander (BASt) NHTSA/Transport Canada: unknown Korea: J.-W. Lee (KATRI) and Y.-H. Youn (Korea Univ. of Tech.-Education) J-MLIT: H. Inomata (JASIC-GENEVA), A. Konosu (JARI/Chairperson) Industrial Parties (related to car product) ACEA: O. Ries, S. O. Siems (Volkswagen), T. Kinsky (GM-Europe), R. Fleischhacker, W. Rentschler (Porsche), B. Trommler (Volvo) JAMA: M. Tanahashi, I. Imaizumi (Honda R&D) Alliance: unknown KAMA: unknown CLEPA: unknown Independent Parties UTAC: F. Minne TUV: W. Liebers Dummy Product Makers FTSS: W. Onvlee (FTSS-Europe) JASTI: T. Inoue

Slide4: 

2. Tasks Task1: Evaluation and Modification of the usability, repeatability, reproducibility, and durability of Flex-PLI as a tool for GTR/PS legform test. And shows the comparison results of all the above issue between the TRL-LFI and Flex-PLI. Usability Repeatability (component level and assembly level) Reproducibility (component level and assembly level) Durability (at least until threshold level durability is needed) Comparison between TRL-LFI and Flex-PLI for all above issue Task 3: Technical Feasibility Task 4: Evaluation of Protection Level provided by the Flex-PLI and the new threshold values Can develop a car which complies the new threshold/requirement Evaluation of vehicle design and Evaluation of design process Task 2: Review for the Injury Risk Function

Slide5: 

3. Activities 1st Flex-TEG MT (OICA office, Paris, 5-6 Sep. 2005) Confirmation of TOR for this working group Introduction for the Flex-PLI type G (Flex-G) Test results for the Flex-G (component tests, car tests) Discussion on issues of Flex-PLI Confirmation of future action plan -> More test results are required for detail discussions 2nd Flex-TEG MT (BASt, Bergisch, 22 Nov. 2005) Test results for the Flex-G (repeatability tests, reproducibility tests, car tests) Tour for the Flex-G testing (at BASt/BGS) Discussion Confirmation of future action plan ->Usability, Repeatability, Reproducibility of Flex-G is good. ->However, Bending limit of the knee joint should be modified.

Slide6: 

4. Schedule

authorStream Live Help