Presentation Transcript
CMI ASSOCIATED LABORATORIES: CMI ASSOCIATED LABORATORIES short description
2003
NATIONAL MEASUREMENT SYSTEM: NATIONAL MEASUREMENT SYSTEM The National Measurement System is decentralized also at the level of National Standards. They are maintained by the Czech Metrology Institute (majority of them) and exceptionally by other authorized subjects - ASSOCIATED LABORATORIES.
Slide3: Associated laboratories complete the highest level of the traceability chain in the country in special fields where some aspects promise more efficient satisfaction of needs then establishment of relevant laboratory in the CMI. Reasons are :
Top level qualification of the laboratory is available
Marginal values of the quantity are covered
Number of service users is limited To utilize all available resources This solution is choosen if :
Slide4: Competence of the associated laboratory is verified either by accreditation according to EN ISO/IEC 17025 standard or by an assessment executed by the CMI experts committee.
The laboratory is represented by the CMI in MRA and EUROMET activities.
The laboratory accepts the CMI quality system items concerning National Standards, Key Comparisons, CMC presentation and EUROMET contact persons.
Slide5: Establishment of associated laboratories is based on the metrological legislation and on the authorization by the Czech Office for Standards, Metrology and Testing.
Special agreement have been signed between CMI General Director and statutory bodies of associated laboratories.
COHERENCE WITH THE CMI QS: COHERENCE WITH THE CMI QS AGREEMENT WITH THE CMI
QUALITY MANUAL
PROCEDURES
STANDARD OPERATION
ENTRY TO THE CMC-STD CMI DATABASE
Slide7: Institute of Radio Engineering and Electronics, Academy of Science, CR Laboratory of the National Time and Frequency Standard ASSOCIATED LABORATORIES
Slide8: Academy of Science
Institute of Radioelectronics Department of TF – ass. lab. Czech Metrology Institute COSMT authorization agreement ORGANISATION Governmental body, financed by the national budget
Slide9: TF STANDARD LABORATORY
Slide10: Research Institute of Geodesy, Topography and Cartography Metrology Centre ASSOCIATED LABORATORIES
Slide11: Associated Laboratory of the CMI in the area of geometrical quantities (length, angle)
Accredited Calibration Laboratory (ISO/IEC 17025)
Authorised Metrological Centre
Member of EUROMET
Length, angle, spatial position and gravity standards ASSOCIATED LABORATORIES
POSITION OF THE VUGTK: ISO/IEC 17025 POSITION OF THE VUGTK Czech Office for Surveying, Mapping and Cadastre VÚGTK (CZ)
RIGTC Accredited Calibration Laboratory Czech Metrology Institute agreement ISO 9001 Governmental body, financed by the national budget
Slide13: Network for testing GPS equipment
System of 3 testing fields
Distances from 3,5 m to 11 km
Uncertainty ± 0,5 mm to ± 3,0 mm GPS Testing Network
Slide14: Institute of Chemical Technology,
Metrological laboratory ASSOCIATED LABORATORIES
Slide15: METROLOGICAL LABORATORY OF ICT PRAGUE accredited calibration laboratory by CAI
designated by CMI as CIPM-MRA laboratory Measurement procedures:
IDMS with ICP/MS
Coulometry
GC/MS, LC/MS
Slide16: Governmental body, financed by the national budget
MINISTRY OF EDUCATION
Slide17: Czech Hydrometeorological Institute
Calibration Laboratory of Imissions ASSOCIATED LABORATORIES
Slide18: CALIBRATION LABORATORY OF EMMISIONS (air quality) accredited calibration laboratory by CAI, EN ISO/IEC 17025
designated by the CMI as a CIPM-MRA laboratory ensures:
air pollution monitoring and calibration of measuring instruments for SO2 , NO-NOx, CO, O3, BTX
validation of analytical procedures in the field of air pollution-ambient air monitoring.
Slide19: ORGANISATION Ministry of Environment The Czech
Hydrometeorological
Institute Calibration Laboratory
for ambient air quality
(accredited laboratory No.2284) ISO/IEC 17025 Czech Accreditation
Institute Czech Metrology
Institute association agreement CHMI
Slide20: Sampling of ref. materials VIEW TO THE LABORATORY CHMI
CMI ASSOCIATED LABORATORIES: CMI ASSOCIATED LABORATORIES end