Developed to allow perfect loading of groundbait onto the Preston In-Line Flat Method Feeder the Quick Release Method Mould quickly forms a perfect feeder full of groundbait or pellets every time. This ensures more accurate casting due to the constant size of the loaded feeder. The release button on the bottom on the bottom ensures that the feeder is ejected consistently, without the frustration of leaving the groundbait in the mould. Designed to be used in conjunction with the Preston In-line Flat Method Feeder. :
Developed to allow perfect loading of groundbait onto the Preston In-Line Flat Method Feeder the Quick Release Method Mould quickly forms a perfect feeder full of groundbait or pellets every time. This ensures more accurate casting due to the constant size of the loaded feeder. The release button on the bottom on the bottom ensures that the feeder is ejected consistently, without the frustration of leaving the groundbait in the mould. Designed to be used in conjunction with the Preston In-line Flat Method Feeder. Here’s What You Will Need : 1: A Preston’s Method Feeder & Mould 2: Korum Quick Change Bead 3: Drennan 3” Hook Length Size 16/14/12 4: Feed Pellets/Ground Bait 5: Hook Bait of choice 6: Baiting needle & Bait Stops ( If Using hair Rig )
Slide 3:
Step 1 Step 2 Thread on the Preston’s Method feeder to the main line & Insert the main line through the Buffer Part of the Korum Quick Change Bead Now Tie on the Quick Change part of the Bead using a Uni Knot
Slide 4:
Step 3 Step 4 Now insert the hook link into the Quick change Link and push inside the Buffer Bead to Lock in position. Now if you decide to use a Hair Rig thread on you choice of hook bait using a Baiting needle & Bait Stop I’ve opted for SonuBaits Tiger Fish 6mm
Slide 5:
Step 5 Step 6 Now Simply Add you baited Hook Into the Mould. Now With the Prepared Feed Pellets top up the mould firming the pellets into the mould But Don't use allot of Pressure.
Slide 6:
Step 7 Step 8 Now With the base of Feeder Facing Upwards, Holding both the feeder & Mould Squeeze together, Then using the release button. You Should end up with something like this & your Now ready to start Fishing.
Slide 7:
Here’s The Feeder Breaking Down In total The Feeder took almost 4minutes to break Down Taking into account this was in the kitchen Sink. I hope this Slideshow helped you to understand the Preston’s Method feeder Rig . There are a few different size’s of Preston’s method feeders & Moulds on the market which are used for different scenarios such as Fishing Shallow and Deeper Waters the one used there was a 35g