Slide2:
41st GRSP Flex-TEG Overall Schedule
Slide3:
Latest Flex-TEG Activities (4th Flex-TEG meeting) Agenda of 4th Flex-TEG meeting (2 April 2007, BASt, Bergisch Gladbach)
1. Opening and Welcome
2. Adoption on the draft agenda of 4th Flex-TEG meeting
3. Adoption on the draft minutes for 3rd Flex-TEG meeting
4. Confirmation of Status of Action Items
5. Flex-GT Information and Discussions
5.1. Computer simulation analysis
5.1.1. Development of an FE Biofidelic Flexible Pedestrian Legform Impactor Model
(FLEX-GT-prototype Model)
5.1.2. Development of a Biofidelic Flexible Pedestrian Legform Impactor Type GT
(FLEX-GT)
5.2. Specifications
5.2.1. Information on Flexible Pedestrian Legform Impactor Type GT (FLEX-GT)
5.3. Test results
5.3.1. Flexible Pedestrian Legform Impactor Type GT (FLEX-GT) Evaluation Test Results
5.3.2. Flexible Pedestrian Legform Impactor Type GT (FLEX-GT) Car Test Results
5.3.3. Flex-GT-prototype BASt Tests
5.3.4. Handling and Usage (Flex-GT-prototype)
5.3.5. Certification Histories (Flex-GT-prototype)
5.3.6. Flex-GT-prototype ACEA/BASt Tests at BASt/BGS March 2007
5.4. Demonstration of the Flex-GT-prototype test (13:30h)
6. Future action plans (round-robin tests, etc.)
7. Discussion on the contents of Flex-TEG status report for the 41st GRSP
8. AOB
9. Closing
Slide4:
Latest Flex-TEG Activities (4th Flex-TEG meeting) Participants of 4th Flex-TEG meeting (2 April 2007, BASt, Bergisch Gladbach) A. Konosu（Flex-TEG chairperson/J-MLIT/JARI）
B. Been（Flex-TEG secretariat/FTSS）
H. Inomata (J-MLIT/JASIC)
O. Zander, B. Lorenz (BASt)
D. Cesari (INRETS)
D. Gehring, P. Lessmann (BGS)
T. Kinsky, M. Zeugner, M. Erzgraeber (GM-E/ACEA)
O. Ries (VW/ACEA)
R. Fleischhacker (Porsche/ACEA)
A. Sipido, J. Ni (Ford)
H. Suzuki, I. Imaizumi (HONDA R&D/JAMA)
K. Wolff (SRS)
F. Minne (UTAC)
L. Thompson (TRL)
W. Liebers (TUV)
P. Haug (GE Plastics)
M. Burleigh (FTSS-UK)
T. Issiki (JARI)
Total: 24 attendances
Slide5:
Latest Flex-TEG Activities (4th Flex-TEG meeting) Point 1: Finalization of the Flex-GT specifications Flex-GT specification (need not to change Flex-GT-prototype specification) and its best impact height is selected.
Slide6:
Latest Flex-TEG Activities (4th Flex-TEG meeting) Point 1: Finalization of the Flex-GT specifications, contd. Flex-GT Constructions Measurement Items Main body Outer Flesh Flesh
Neoprene and rubber sheets
Slide7:
Latest Flex-TEG Activities (4th Flex-TEG meeting) Point 2: Many of Flex-GT and Flex-GT-prototype test data is started to obtain Agenda of 4th Flex-TEG meeting
5.3. Test results
5.3.1. Flexible Pedestrian Legform Impactor Type GT (FLEX-GT) Evaluation Test Results
5.3.2. Flexible Pedestrian Legform Impactor Type GT (FLEX-GT) Car Test Results
5.3.3. Flex-GT-prototype BASt Tests
5.3.4. Handling and Usage (Flex-GT-prototype)
5.3.5. Certification Histories (Flex-GT-prototype)
5.3.6. Flex-GT-prototype ACEA/BASt Tests at BASt/BGS March 2007 Car07D, Flex-GT (SN02) Car07D, Flex-GT (SN01) Car07C, Flex-GT (SN01) Car07A, Flex-GT (SN01) source: JAMA tests source: JAMA tests source: J-MLIT/NTSEL tests source: J-MLIT/NTSEL tests source: BASt/BGS tests source: BASt/BGS tests Evaluation on Flex-GT-prototype and Flex-GT is just started.
Flex-GT evaluation tests will be continued by this autumn, then 5th Flex-TEG meeting will be held in this autumn.
Slide8:
Thank you for your attentions!