Power Point

Views:
 
Category: Entertainment
     
 

Presentation Description

power point/sound

Comments

Presentation Transcript

Tutorial: How To Change A Tire :

Tutorial: How To Change A Tire META ENG 2311/2314 Instructor: Dr. Gonzales By: Ana Juliette Gearhart

The Purpose of the Tutorial :

The Purpose of the Tutorial The main purpose of this document is to inform TSTC students on the basics that are required of them when tire changing. This is a beneficial document and meant to guide them through an emergency situation. After reading these instructions, TSTC students will understand basic equipment that is required and how to change a tire properly.

Equipment & Supplies :

Equipment & Supplies Jack Lug Wrench Spare Tire, Inflated properly. Tire Block, (optional)

Step 1: Choose Location :

Step 1: Choose Location Safely off the road, out of traffic, easily observed from a distance. →→→ Select a cite as level as possible Turn on your Hazard lights . →→→

Step 2: Remove Tools From Vehicle :

Step 2: Remove Tools From Vehicle Remove and inspect the equipment that you are going to use to change the tire Place equipment next to the flat tire Place blocks opposite wheel to the flat

Step 3: Loosen the lug nuts :

Step 3: Loosen the lug nuts Remove hubcap, not all vehicles require this Only loosen the lug nuts

Step 4: Jack up the vehicle:

Step 4: Jack up the vehicle Follow owner’s manual instructions to find out where the jack needs to be placed Place jack underneath the vehicle until it contacts the frame Continue to raise until elevated enough to replace fully inflated tire

Step 5: Remove Flat tire :

Step 5: Remove Flat tire Remove lug nuts from the bolts and place off to the side Grab the wheel and pull it straight towards you until off the car

Step 6: Place on the Spare Tire :

Step 6: Place on the Spare Tire Place the spare in front of the wheel well Align the holes in the center of the spare with the bolts on the car Lift the spare tire and place on the threaded bolts Place pressure and push tire towards the car until it can not go further Place the lug nuts on the bolts and being to tighten just enough to hold tire in place

Step 7: Lower the vehicle :

Step 7: Lower the vehicle Lower the jack until your car is resting on all four tires Begin to tighten lug nuts starting with one, and tighten in opposite pairs

Step 8 :

Step 8 Place your flatten tire where your spare was located Place your jack and lug wench back in their place Go to nearest destination to have your flat tire repaired

authorStream Live Help